Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 6609069-7 is a SINGLE PHASE EMI FILTER with 250V, 50A rating. It operates b/w -10°C to 40°C, with max leakage current of 3.9mA. Ideal for PANEL MOUNT applications in EMI suppression for mains power systems.
Median Price
$206.000
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
$188.237
100+ parts
$179.372
1k+ parts
-
10k+ parts
Master Electronics
$159.650
Mouser Electronics
$215.870
$158.630
DigiKey
$219.080
$168.156
Powell Electronics
$178.410
Nova Conductors
$153.867
Electro Sonic
$266.320
$134.190
IBS Electronics
$419.771
$214.193
Vyrian
VNN
Aranea Global
$150.790
$144.758
Suitable for use in various electrical systems and applications with standard voltage requirements.
Effectively reduces electromagnetic interference in single-phase power systems, ensuring smooth operation of connected equipment.
Can operate efficiently in environments where temperatures can reach up to 40°C, providing reliability in various conditions.
Capable of functioning in colder temperatures down to -10°C, making it suitable for use in a wide range of climates.
Maintains a low level of leakage current, ensuring safety and compliance with electrical regulations.
Easy to install on panels or enclosures, facilitating integration into existing systems without the need for complex mounting solutions.
Supports a high rated current of 50 A, making it suitable for applications that require significant power handling capabilities.
EMI Mains Filters 6609069-7 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Filter Type:
Maximum Leakage Current:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
General Semiconductor
Infineon Technologies
EMC-03
Cui
Cui's EMC-03 EMI Mains Filter is UL, EN, and IEC approved with a rated voltage of 305V. This single-phase filter has a max operating temperature of 85°C and a rated current of 0.3A. Ideal for applications requiring noise suppression in electronic equipment with through-hole mounting, measuring 22.2mm x 33.7mm x 18mm (WxLxH).
CMS2-5-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.3 A; Height: 6 mm; Dimensions: L8.89XB8.89XH6 (mm); Length: 8.89 mm; Approvals (V): UL;
FN406B-8.4-02
Schaffner Holding Ag
FN406B-8.4-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 8.4A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2500V, and max leakage current of 0.002mA. Ideal for applications requiring through-hole mounting in electronics to reduce electromagnetic interference.
SSRH7HS-M04467
KEMET Corporation
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
SSHB10HS-17019
KEMET Corporation's SSHB10HS-17019 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25 to 130 °C. Ideal for applications requiring UL approval, this single-phase filter with a rated current of 1.7A is designed for through-hole mounting in various electronic devices.
TDK
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
SCF-01-5000
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 15 mm; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 60 Cel;
1VB1
TE Connectivity
1VB1 by TE Connectivity is a SINGLE PHASE EMI FILTER with UL, CSA, VDE approvals. It offers 15 dB insertion loss at 0.15 MHz and 50 dB at 30 MHz. Ideal for applications requiring EMI mains filtering in a compact panel mount design.
RN102-2-02-1M1
RN102-2-02-1M1 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 2A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is ideal for through-hole mounting in various electronic systems.
CMS3-9-R
Eaton Corporation
Eaton Corporation's CMS3-9-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.7A. Ideal for surface mount applications due to its compact dimensions of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish and comes in tape and reel packaging.
20VB1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Maximum Leakage Current: .4 mA; Mounting Type: PANEL MOUNT; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
FN258HVIT-100-35
Schaffner Holding Ag's FN258HVIT-100-35 is a UL, CSA, ENEC-14 approved 690V three-phase EMI filter with 110A rated current. It operates b/w -25°C to 100°C and has a high pot of 3100V. Ideal for panel mounting applications due to its compact dimensions of L350.0xB90.0xH220.0mm.
RN112-1.2-02-6M8
The Schaffner Holding Ag RN112-1.2-02-6M8 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates b/w -40°C to 100°C, has a single-phase filter type, and a rated current of 1.2A. Ideal for applications requiring through-hole mounting in environments with 50/60Hz frequency requirements.
FN3025HL-20-71
Schaffner Holding Ag's FN3025HL-20-71 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 520V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 0.4mA, and a rated current of 20A. This three-phase filter is mounted on DIN rail for applications requiring effective EMI filtering in industrial settings.
SSHB21HS-10145
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
GTX-2100-Y03
KEMET GTX-2100-Y03 EMI Mains Filter rated at 250V, 10A with approvals from TUV and UL. Features include 300 Mohm min insulation resistance, single-phase filter type, and -25 to 55 °C operating temp. Ideal for panel mounting applications requiring high pot of 500V and max leakage current of 0.75mA.
SSB11V-R17043
KEMET Corporation's SSB11V-R17043 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 1.7A current. Operating b/w -25°C to 130°C, it is ideal for EMI mains filtering applications. With dimensions of L22.0xB14.5xH21.5 mm, this filter offers through-hole mounting in trays for efficient installation.
JAC-10-103-D
Cosel
JAC-10-103-D by Cosel is a 3-phase EMI filter with UL and CSA approvals. It has a rated voltage of 500V, rated current of 10A, and max leakage current of 1mA. Ideal for industrial applications requiring efficient EMI mains filtering in a compact DIN rail mount design.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
6609066-3
TE Connectivity's 6609066-3 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, 10A rated current, and 3mA max leakage current. Ideal for panel mounting applications in environments with -10 to 40°C temperature range and 50Hz operating frequency.
6609047-3
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Minimum Operating Temperature: -10 Cel; Operating Frequency (Hz): 50Hz; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 1.2 mA;
6609032-9
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 5 A; Dimensions: L97.8XB52.6XH29.5 (mm)/L3.85XB2.071XH1.161 (inch); Minimum Operating Temperature: -10 Cel; Length: 97.8 mm;
6609053-5
TE Connectivity's 6609053-5 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. It operates b/w -10°C to 40°C, suitable for PANEL MOUNT applications in EMI mains filtering at 50Hz frequency.
6609069-6
SINGLE PHASE EMI FILTER; Rated Current: 50 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel; Maximum Leakage Current: 7 mA; Minimum Operating Temperature: -10 Cel;
6609046-7
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
6609047-4
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 15 A; Width (mm): 100.6; Rated Voltage: 250 V; Minimum Frequency: .01 MHz;
6609035-7
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 6 A; Minimum Operating Temperature: -10 Cel; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel;
6609036-2
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 3 A; Maximum Leakage Current: .4 mA; Dimensions: L85.1XB52.6XH29.5 (mm)/L3.35XB2.071XH1.161 (inch); Width (mm): 52.6;
6609028-2
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 1 A; Height: 23.1 mm; Maximum Leakage Current: .4 mA; Insertion Loss At Maximum Frequency: 50 dB;
6609043-1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 3 A; Minimum Operating Temperature: -10 Cel; Maximum Leakage Current: .5 mA; Mounting Type: PANEL MOUNT;
6609054-2
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 3 A; Rated Voltage: 250 V; Approvals (V): UL; CSA; VDE; Maximum Leakage Current: .002 mA;
6609058-4
SINGLE PHASE EMI FILTER; Maximum Frequency: 500 MHz; Rated Current: 6 A; High Pot: 1450 V; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 40 Cel;
6609069-1
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 6 A; Minimum Operating Temperature: -10 Cel; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 40 Cel;
6609069-2
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 12 A; Height: 55.4 mm; Length: 151.3 mm; Additional Features: DIN TERMINAL;
6609069-3
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 16 A; Maximum Operating Temperature: 40 Cel; Additional Features: DIN TERMINAL; Approvals (V): UL;
6609069-5
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 36 A; Width (mm): 139.2; High Pot: 1450 V; Additional Features: DIN TERMINAL;
6609030-2
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -10 Cel; Minimum Insulation Resistance: 10 Mohm;
6609036-9
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
6609069-4
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Maximum Leakage Current: 3.8 mA; Maximum Operating Temperature: 40 Cel; Minimum Operating Temperature: -10 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved