Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 6 A; Rated Voltage: 250 V; Insertion Loss At Maximum Frequency: 56 dB; Height: 39.6 mm;
Median Price
$38.725
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Verical
1+ parts
$37.141
100+ parts
$32.525
1k+ parts
$32.346
10k+ parts
-
Arrow
$40.309
$35.300
$35.106
Chip1Stop
Assy Fe
EMI Mains Filters 6609051-1 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Additional Features:
Approvals (V):
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
High Pot:
Insertion Loss At Maximum Frequency:
Insertion Loss At Minimum Frequency:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Pro-an Electronic
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Telcom Semiconductor
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
B82722S0193A041
TDK
TDK's B82722S0193A041 is a 48V single-phase EMI mains filter with 19A rated current. It operates b/w -40°C to 125°C, suitable for IEC approvals and surface mount installation. Ideal for applications requiring effective filtering at 50/60Hz frequency in compact spaces.
SC-35-D010JH
KEMET Corporation
KEMET SC-35-D010JH EMI Mains Filter rated at 250V, 35A with UL approval. Features single-phase filter type, -25 to 120°C operating temp range. Ideal for noise suppression in electronic equipment.
FN2010-3-06
Schaffner Holding Ag
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
CMS1-6-R
Eaton Corporation
CMS1-6-R by Eaton Corp is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.1A. This single-phase filter is surface-mounted and compactly sized at L9.4xB7.2xH2.6mm, suitable for various electronic applications.
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
FN2080-10-06
FN2080-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 11.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L130.5XB56.0XH45.4 (mm), it is suitable for chassis mount installations in various electronic equipment to ensure efficient electromagnetic interference suppression.
SCR25XV-220-1R9A007JH
KEMET Corporation's SCR25XV-220-1R9A007JH is a 1000V rated SINGLE PHASE EMI filter with 22A current. Operating temperature ranges from -40°C to 120°C. It is used in EMI mains filtering applications due to its compact size and through-hole mounting design.
FMAC-0932-2510
Schurter Ag
Schurter Ag's FMAC-0932-2510 EMI Mains Filter is UL, CUL, VDE, IEC, and ENEC-10 approved with a rated voltage of 480V. It operates at temperatures ranging from -25°C to 100°C and has a max leakage current of 156mA. With dimensions of L201.0xB121.0xH66.0mm, it is ideal for panel mounting in three-phase applications up to 25A.
FN2020-1-06
Schaffner Holding Ag's FN2020-1-06 is a UL, CSA, ENEC-14 approved 250V single-phase EMI filter with 100°C max temp and -25°C min temp. It operates at 50/60Hz frequency, has a rated current of 1.15A, and offers high pot protection up to 2000V. Ideal for chassis mount applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
FN2010-12-06
FN2010-12-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH29.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems up to 13.8A.
SS26V-R100330
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
CMS2-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.8 A; Maximum Operating Temperature: 160 Cel; Packing Method: TAPE AND REEL; Width (mm): 8.89; Manufacturer Series: CMS;
744844471
Wuerth Elektronik & Kg
Wurth Elektronik 744844471 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 9A rated current. Operating temp from -40°C to 125°C, it's ideal for EMI mains filtering applications. Compact at 18.5mm width, 28mm length, and 33mm height, suitable for through-hole mounting in systems with a frequency of 50Hz.
SS11VL-R06270
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Length: 22 mm; Width (mm): 14.5; Maximum Operating Temperature: 75 Cel; Rated Voltage: 250 V;
74482210002
Wurth Elektronik 74482210002 is a single-phase EMI filter with 4 terminals, rated for 250V and 10A. Operating b/w -40°C to 125°C, it's ideal for applications requiring EMI mains filtering at a frequency of 50Hz. Mountable through holes, its compact size of L18.5xB14.5xH22.0 (mm) makes it suitable for various electronic devices.
FN406-1-02
Schaffner Holding Ag's FN406-1-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 1A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at -25 to 100 °C and has a max leakage current of 0.373 mA. Ideal for applications requiring through-hole mounting and high-pot testing up to 2000V in frequency range of 50/60Hz.
20EMC1
TE Connectivity's 20EMC1 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -10°C to 40°C, with max leakage current of 0.73mA. Ideal for PANEL MOUNT applications in EMI suppression at 50Hz frequency.
20VR6
The TE Connectivity 20VR6 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for applications requiring EMI mains filtering in electronic systems.
RTEN-5060
The TDK RTEN-5060 EMI Mains Filter is a THREE PHASE filter with 60A rated current and 500V voltage. It offers high insulation resistance of 100 Mohm, UL and EN approvals, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved