Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 213845-1 is a CPC connector with 50A rated current, suitable for power applications. It features crimp terminals, copper alloy material, and can handle wire sizes from 14 to 12 AWG. With a max operating temperature of 105°C and rated voltage of 600V DC, it is ideal for various assembly products requiring reliable connections.
Median Price
$4.454
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$1.870
100+ parts
-
1k+ parts
10k+ parts
$1.690
Newark
$6.230
$4.700
$4.460
TE Connectivity
$6.960
$6.260
$5.740
TTI
$3.420
Master Electronics
$4.120
$4.050
$3.970
Verical
$4.788
$4.765
$4.741
Inventory MP
Bristol Electronics
Electro Sonic
$3.660
$3.570
$3.190
IBS Electronics
$5.778
$5.680
$5.568
VNN
Nova Conductors
Benley Electronics
$1.750
Continental Prestige Electronics
$4.350
$3.480
Perfect Parts
Argo Parts USA
Aranea Global
Authorized Procurement Solutions
EMSNET (Excess)
The thick finish ensures better durability and longevity of the connectors, making them suitable for long-term use in a variety of applications.
Crimped terminals provide a secure and reliable connection, reducing the risk of loose connections or electrical failures.
With a high rated voltage, these connectors can safely handle high voltage applications without the risk of electrical breakdown.
The high maximum operating temperature makes the connectors suitable for use in environments with elevated temperatures, ensuring consistent performance.
The low minimum operating temperature allows the connectors to be used in cold environments without any impact on their performance.
The high rated current capacity allows these connectors to handle a substantial amount of electrical current, making them ideal for high-power applications.
The power design of the connectors indicates that they are specifically intended for high-power applications, ensuring reliable performance under heavy electrical loads.
Copper alloy is known for its excellent conductivity and durability, making these connectors highly efficient in transferring electricity and resistant to wear and tear.
The high rated DC voltage ensures that these connectors can safely handle direct current applications with high voltage requirements.
Assembly Products 213845-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Contact Gender:
Cross Section Area:
Design:
Finish Thickness:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Usage:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
213845-1 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Grande Electronics
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
3030161
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
2002-404
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
DF3-2428SCFC
Hirose Electric
DF3-2428SCFC by Hirose Electric is a female contact with bellowed design, made of phosphor bronze. It has a finish thickness of 7.9 and terminal length of 0.108". Ideal for straight mounting applications in assembly products.
SAN-002T-0.8A
J S T Mfg
SAN-002T-0.8A by J S T Mfg is a CRIMP terminal with approvals from CSA and UL, rated for 2A current at 250V AC/DC. It is used in SAN CONNECTOR applications, supporting wire sizes from 30 to 24 AWG with a temperature range of -25 to 85°C.
7-745129-9
CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;
5011933000
Molex
Molex 5011933000 is a crimp terminal contact designed for signal applications. It supports wire sizes from 32 AWG to 28 AWG and is made of phosphor bronze. Its female gender makes it suitable for various assembly products in the electronics industry.
61030012010
Harting Electronics & Kg
The Harting Electronics & Kg 61030012010 is a metal HOOD for D-SUB CONNECTOR. It has a max operating temp of 90°C and min of -20°C. Mounting options include SCREW (#4-40).
AT60-16-0622
Amphenol
Amphenol's AT60-16-0622 CONTACT features stamped design, copper alloy material, and male gender. It supports wire sizes from 20 AWG to 18 AWG with a rated current of 13 A. Ideal for applications requiring straight mounting and round pin-socket contact style.
3200043
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): CSA; UL; Material: COPPER ALLOY; DIN Conformity: NO;
WP-2S
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE;
WM-2P
The TE Connectivity WM-2P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it's ideal for power and signal connections in various industries.
DTP06-2S-C017
TE Connectivity's DTP06-2S-C017 is a FEMALE power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for applications requiring high-power transmission in harsh environments.
12048074
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Additional Features: CONTACT FINISH: TIN; Mounting Style: STRAIGHT; IEC Conformity: NO; Assembly Item Name: CONTACT;
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
5205980-4
TE Connectivity's 5205980-4 is a screw retainer kit for metal shell connectors. It supports wire sizes up to 0 AWG, made of carbon steel, and mounts with #4-40 screws. Ideal for assembly products in various industrial applications.
WM-3P
TE Connectivity's WM-3P, part of Assembly Products, is designed for DTM SERIES. With a temp range of -55 to 125 °C, it supports up to 0 AWG wire size. Made of PBT, it suits POWER AND SIGNAL applications.
1SNA199336R2000
TERMINAL BLOCK ACCESSORY;
1-66099-5
TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.
1SNK900001R0000
Abb
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO; Maximum Operating Temperature: 110 Cel; Assembly Item Name: END STOP;
08-50-0114
Molex 08-50-0114 CONTACT features CRIMP terminal type for 30-22 AWG wires. Made of BRASS, it's designed for SIGNAL applications with 0.062" cable entry. Ideal for FEMALE contacts in Assembly Products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
213823-2
TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.
213841-3
TE Connectivity's 213841-3 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 200µm, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial uses.
213812-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; IEC Conformity: NO; Shell Sizes: 23; MIL Conformity: NO; Material: POLYESTER;
213847-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Rated DC Voltage: 600 V;
213843-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Maximum Wire Size: 8 AWG; Wire Gauge (AWG): 8; Terminal Type: CRIMP;
213845-3
TE Connectivity's 213845-3 is a male power contact with crimp terminal type, rated for 600V and 50A. Designed for ECONOSEAL METRIMATE SQUARE GRID applications, it has a wire gauge of 12 AWG and operating temperatures from -55 to 105°C.
2138530-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
213843-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Cross Section Area: 8 mm2; Maximum Wire Size: 8 AWG; Terminal Type: CRIMP;
213847-1
TE Connectivity's 213847-1 is a female contact for G Series connectors with a rated voltage of 600V and current of 50A. Constructed with stranded copper alloy, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for power applications requiring crimp terminals in straight mounting style.
213847-4
TE Connectivity's 213847-4 CONTACT features CRIMP terminals, STRANDED construction, and a rated current of 50A. Ideal for POWER applications with wire gauge ranging from 14 to 12 AWG, it is designed for FEMALE contact gender in assemblies requiring a max voltage of 600V.
213845-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Cross Section Area: 3 mm2; Rated DC Voltage: 600 V; Terminal Type: CRIMP;
213845-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Maximum Wire Size: 12 AWG; Wire Gauge (AWG): 12; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: GOLD FLASH OVER NICKEL (50);
213845-5
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Terminal Type: CRIMP; Material: COPPER ALLOY; Rated DC Voltage: 600 V;
213845-6
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Design: POWER; Usage: CPC CONNECTORS, METRIMATE CONNECTORS; Maximum Operating Temperature: 105 Cel;
213841-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Wire Gauge (AWG): 8; Design: POWER; Minimum Wire Size: 10 AWG;
213841-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Wire Gauge (AWG): 8; Maximum Operating Temperature: 105 Cel; Cross Section Area: 8 mm2;
213841-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Finish Thickness: 30; Design: POWER; Contact Gender: MALE;
213841-5
TE Connectivity's 213841-5 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 200 microns, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial settings.
213841-8
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Maximum Wire Size: 8 AWG; Minimum Operating Temperature: -55 Cel; Rated DC Voltage: 600 V;
213843-2
TE Connectivity's 213843-2 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 30, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial uses.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved