Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 213843-3 is a POWER FEMALE contact with CRIMP terminal type. It has a rated voltage of 600V, rated current of 50A, and can accommodate wire sizes from 10 AWG to 8 AWG. Ideal for applications requiring high power transmission in straight mounting style configurations.
Median Price
$13.040
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$7.414
100+ parts
-
1k+ parts
10k+ parts
TTI Europe
$8.057
$7.676
Chip1Stop
$8.180
Farnell
$11.220
$9.100
$7.760
Conrad
$13.055
Mouser Electronics
$13.400
$12.350
$12.030
Newark
$15.010
$12.630
$11.270
DigiKey
$16.150
$11.670
$9.921
Element14
$20.330
$14.690
$13.110
Powell Electronics
$32.327
$22.629
$22.185
TTI
Master Electronics
$11.070
$9.770
Verical
$13.024
$11.612
VNN
Vyrian
Rapid Electronics
Electro Sonic
$8.090
$7.970
IBS Electronics
$13.688
$13.548
Nova Conductors
ABC Electronics Ltd.
Continental Prestige Electronics
$7.000
$5.780
$5.030
Neutron USA
$49.990
Authorized Procurement Solutions
Argo Parts USA
Assy Fe
Perfect Parts
Netroflash
Speed Components Ltd (Excess)
Thicker finish provides better durability and resistance to wear and tear.
Crimp terminals offer a secure and reliable connection, reducing the risk of loose connections and electrical failures.
High rated voltage ensures compatibility with a wide range of electrical systems and applications.
High maximum operating temperature allows for use in demanding environments without risk of overheating.
Low minimum operating temperature allows for use in cold environments without compromising performance.
Suitable for carrying high currents and minimizing voltage drops over long distances.
Optimal cross-sectional area ensures efficient power transmission and minimizes resistance.
Compatible with a wide range of wire sizes, providing flexibility in installation.
Accommodates thicker wires for increased current-carrying capacity.
High rated current capacity allows for handling of heavy loads without overheating.
Designed for specific gender compatibility, ensuring proper connections in the assembly.
Power-oriented design for applications requiring high current-carrying capability.
Straight mounting style simplifies installation and ensures alignment with other components.
Copper alloy material offers excellent conductivity and durability for long-lasting performance.
Suitable for use in direct current (DC) applications with the same high voltage rating.
Assembly Products 213843-3 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Contact Gender:
Cross Section Area:
Design:
Finish Thickness:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
08-50-0113
Molex
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
33012-3002
The Molex 33012-3002 is a crimp terminal contact for MX150 connectors. It has a temperature range of -40 to 105°C, with wire sizes from 20 to 18 AWG. The female contact has a resistance of 8 mΩ and can handle up to 500V DC, making it ideal for various assembly applications.
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
350218-3
TE Connectivity
TE Connectivity 350218-3 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. It has a rated voltage of 600V, rated current of 19A, and wire gauge range from 20 AWG to 14 AWG. Ideal for power applications with approvals from CSA, UL, and VDE.
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
221-523/000-004
Wago
TERMINAL BLOCK ACCESSORY;
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
13711548
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CONTACT; Minimum Cable Entry: .0669 inch; Cable Types: FLRY-B; Material: COPPER ALLOY;
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
BVH-21T-P1.1
J S T Mfg
BVH-21T-P1.1 by J S T Mfg is a CRIMP terminal CONTACT with 22-18 AWG wire size range, rated for 250V AC/DC. Made of PHOSPHOR BRONZE, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts and 0.067" cable entry.
293736-1
TE Connectivity's 293736-1 is a male power contact with max operating temp of 85°C and min of -20°C. It supports wire size up to 0 AWG, made of polyamide. Ideal for assembly products requiring high-power connections in various industries.
1658670-1
TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.
057105-000
CONNECTOR ACCESSORY;
204-0016-000
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: ACTUATING HANDLE KIT; Material: GLASS FILLED THERMOPLASTIC;
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
1SET111001R0000
TE Connectivity's 1SET111001R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports 22 AWG wire gauge, up to 105°C operating temperature. Ideal for DISCRETE WIRE applications, featuring STRAIGHT mounting style.
M83513/05-07
CONNECTOR ACCESSORY; DIN Conformity: NO; Manufacturer Series: M83513/05-07; Assembly Item Name: JACKPOST KIT; MIL Conformity: YES; IEC Conformity: NO;
1SNK908310R0000
Abb
CONNECTOR ACCESSORY; Rated Current: 57 A; Insulator Material: POLYAMIDE; Rated AC Voltage: 600 V; Maximum Operating Temperature: 110 Cel; Rated DC Voltage: 600 V;
1-66099-5
TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.
963293-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
213823-2
TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.
213841-3
TE Connectivity's 213841-3 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 200µm, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial uses.
213812-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; IEC Conformity: NO; Shell Sizes: 23; MIL Conformity: NO; Material: POLYESTER;
213845-1
TE Connectivity's 213845-1 is a CPC connector with 50A rated current, suitable for power applications. It features crimp terminals, copper alloy material, and can handle wire sizes from 14 to 12 AWG. With a max operating temperature of 105°C and rated voltage of 600V DC, it is ideal for various assembly products requiring reliable connections.
213847-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Rated DC Voltage: 600 V;
213845-3
TE Connectivity's 213845-3 is a male power contact with crimp terminal type, rated for 600V and 50A. Designed for ECONOSEAL METRIMATE SQUARE GRID applications, it has a wire gauge of 12 AWG and operating temperatures from -55 to 105°C.
2138530-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
213843-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Cross Section Area: 8 mm2; Maximum Wire Size: 8 AWG; Terminal Type: CRIMP;
213847-1
TE Connectivity's 213847-1 is a female contact for G Series connectors with a rated voltage of 600V and current of 50A. Constructed with stranded copper alloy, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for power applications requiring crimp terminals in straight mounting style.
213847-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Finish Thickness: 200; Contact Gender: FEMALE; Rated DC Voltage: 600 V;
213847-4
TE Connectivity's 213847-4 CONTACT features CRIMP terminals, STRANDED construction, and a rated current of 50A. Ideal for POWER applications with wire gauge ranging from 14 to 12 AWG, it is designed for FEMALE contact gender in assemblies requiring a max voltage of 600V.
213845-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Cross Section Area: 3 mm2; Rated DC Voltage: 600 V; Terminal Type: CRIMP;
213845-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Maximum Wire Size: 12 AWG; Wire Gauge (AWG): 12; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: GOLD FLASH OVER NICKEL (50);
213845-5
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Terminal Type: CRIMP; Material: COPPER ALLOY; Rated DC Voltage: 600 V;
213841-2
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Wire Gauge (AWG): 8; Maximum Operating Temperature: 105 Cel; Cross Section Area: 8 mm2;
213841-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Finish Thickness: 30; Design: POWER; Contact Gender: MALE;
213841-5
TE Connectivity's 213841-5 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 200 microns, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial settings.
213841-8
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 50 A; Maximum Wire Size: 8 AWG; Minimum Operating Temperature: -55 Cel; Rated DC Voltage: 600 V;
213843-2
TE Connectivity's 213843-2 is a CPC connector with crimp terminals, rated for 600V and 50A. It has a finish thickness of 30, suitable for power applications with wire gauge up to 8 AWG. Operating temperatures range from -55°C to 105°C, making it ideal for various industrial uses.
213843-4
TE Connectivity's 213843-4 is a CRIMP terminal with 8mm2 cross section area, suitable for 10-8 AWG wires. Rated at 600V and 50A, it is designed for POWER applications with FEMALE contact gender. Operating temperature range from -55 to 105 °C makes it ideal for various assembly products.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved