Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 2007394-5 is a Telecom & Datacom Connector with dimensions of 2.26" x 1.007" x 2.504". It features LIQUID CRYSTAL POLYMER insulator, UL94V-0 flammability rating, and operates b/w -55°C to 105°C. Ideal for telecom and datacom applications requiring a right-angle mounting style with press-fit termination.
Median Price
$68.001
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$67.370
100+ parts
$59.640
1k+ parts
$54.430
10k+ parts
-
Farnell
$72.250
DigiKey
$95.130
$83.100
Mouser Electronics
$100.150
$77.090
Chip1Stop
$48.600
Powell Electronics
$68.632
$58.942
$51.675
Verical
$63.446
Arrow
$63.206
Nova Conductors
Digiode
$61.788
Electro Sonic
$65.570
$57.730
$57.150
IBS Electronics
$83.084
Vyrian
VNN
Semicontronic
$41.310
$40.277
$40.071
Continental Prestige Electronics
$49.140
$39.600
Corphita
$58.536
Kepictronics
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$53.341
$51.709
$50.620
Speed Components Ltd (Excess)
GreenTree Electronics
Assy Fe
Futuretech Components
The compact body length of 2.26 inches allows for space-efficient installation in tight spaces.
Liquid crystal polymer provides excellent electrical insulation and heat resistance, ensuring reliable performance in various operating conditions.
With a high maximum operating temperature of 105°C, this connector is suitable for use in environments that require heat resistance.
The 30u plating thickness provides corrosion resistance and ensures long-term durability of the connector.
Having 8 ports allows for multiple connections, making it suitable for applications that require connectivity to multiple devices.
Nickel silver shell material offers good conductivity and durability, making it a reliable choice for data and telecom applications.
Board mounting option with board lock feature ensures secure and stable installation, preventing accidental disconnection.
Female contact gender is commonly used in data and telecom connectors, providing a reliable interface for mating with male connectors.
Right angle mounting style allows for easy connectivity in confined spaces or when the connector needs to be mounted at an angle.
Press fit termination offers a reliable and secure connection between the connector and the circuit board, ensuring signal integrity.
Telecom & Datacom Connectors 2007394-5 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Reference Standard:
Shell Material:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2007394-5 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Jiangsu Jiejie Microelectronics
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
5787394-7
TE Connectivity 5787394-7 is a telecom & datacom connector with 68 contacts, 0.05" mating pitch, and EMI shielding. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
74320-3000
Molex
The Molex 74320-3000 is a Telecom & Datacom Connector with 29 contacts, gold termination finish, and glass-filled polymer insulator. It operates b/w -20°C to 85°C, ideal for commercial applications requiring high insulation resistance and female contact gender.
PX0456
Bulgin
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
43860-0013
Molex 43860-0013 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. It features insulation resistance of 500MΩ, matte tin over nickel termination contact finish, and UL94V-0 flammability rating. Ideal for board mounting applications in commercial settings with operating temperatures from -40°C to 85°C.
UJ31-CH-G-SMT-TR-67
Cui Devices
UJ31-CH-G-SMT-TR-67 by CUI Devices is a Telecom & Datacom Connector with 24 contacts, POLYAMIDE10T insulator, and 100VAC dielectric voltage. It features a 0.386" body length, 0.167" width, and 0.384" depth. Ideal for telecom/datacom applications requiring high insulation resistance and durability in temperatures ranging from -25 to 85°C.
SS60000-009G
Bel Fuse
Bel Fuse SS60000-009G is a Telecom & Datacom Connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and 8 FEMALE contacts. It features SPLIT BOARD LOCK mounting option for 2 PCB rows spaced at 2.03mm. Ideal for applications requiring TELCOM, MODULAR connectors in RIGHT ANGLE mounting style with POLARIZED HOUSING and COPPER ALLOY shell material.
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
5749069-7
TE Connectivity 5749069-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a temperature range of -55 to 105°C and insulation resistance of 1G ohm. Ideal for telecom applications requiring high reliability and signal currents up to 1A.
GSB343133HR
Amphenol
GSB343133HR by Amphenol is a USB connector with 10 contacts, gold over nickel finish, and liquid crystal polymer insulator. Ideal for telecom/datacom applications, it features female contact gender, surface mount termination, and stainless steel shell material in a right-angle receptacle design.
95503-2884
Molex 95503-2884 is a Telecom & Datacom Connector with TIN finish, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and COPPER ALLOY contacts. It has 8 contacts, FEMALE gender, and JACK body style for BOARD mounting via SURFACE MOUNT. Ideal for telecom and datacom applications requiring reliable connectivity in compact spaces.
43202-8919
Molex 43202-8919 is a telecom & datacom connector with 0.624" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board and panel mounting in telecom applications due to its durability, UL certification, and female contact gender. Operating temperature range from -40°C to 70°C makes it suitable for commercial use.
3-1734035-2
TE Connectivity 3-1734035-2 USB connector has a temp range of -40 to 85°C. With 5 contacts, it's rated for 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications with surface mount termination on boards.
12402012E212A
Amphenol Communications Solutions
The Amphenol Communications Solutions 12402012E212A USB connector features a body length of 0.352", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this male connector has a total of 24 contacts, rated at 5A signal current, with a durability of 10k cycles.
2007435-1
TE Connectivity 2007435-1 is a Telecom & Datacom Connector with 0.303" body length, 0.646" width, and 0.909" depth. It has 19 contacts, POLYETHYLENE insulator material, and operates b/w -20°C to 85°C. Ideal for board mounting applications in telecom and datacom systems.
6116522-1
TE Connectivity 6116522-1 is a Telecom & Datacom Connector with EMI shielding, 8 contacts, and insulation resistance of 500M ohm. It has a body length of 1.31", suitable for panel mounting applications in telecom and datacom equipment. The connector features a right-angle mounting style and solder termination, ensuring durability with 750 cycles lifespan.
1-1705951-1
TE Connectivity 1-1705951-1 is a Telecom & Datacom Connector with 0.598" body length, 0.453" width, and Tin (Sn) termination finish. It has an insulation resistance of 500M ohm and operates b/w -40 to 105°C. Ideal for telecom applications requiring a durable male connector with right-angle mounting option.
614004135023
Wuerth Elektronik & Kg
614004135023 USB connector by Wurth Elektronik features gold termination, polybutylene terephthalate insulator, and copper alloy contacts. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring a durable, polarized housing with solderable retention clips. Operating b/w -40 to 105°C, this female receptacle offers reliable signal current of 1.5A and UL-rated flammability.
2301994-5
TE Connectivity 2301994-5 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and features right-angle mounting for board lock applications.
ARJM11D7-114-AB-EW2
Abracon
ARJM11D7-114-AB-EW2 by Abracon is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a body size of 0.626" x 0.543" x 0.839", operates b/w -40°C to 85°C, and uses solder termination for board mounting applications.
292304-2
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2007562-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED;
2007492-7
TE Connectivity's 2007492-7 is a Telecom & Datacom Connector with -55 to 105°C operating range. Features include 40 contacts, press fit termination, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
2007394-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
2007637-8
TE Connectivity 2007637-8 is a Telecom & Datacom Connector with LIQUID CRYSTAL POLYMER insulator. Featuring 80 contacts in a 2+2 row configuration, it has a body size of 1.139" x 1.007" x 2.49". Ideal for telecom and datacom applications requiring right-angle mounting with press-fit termination at temperatures ranging from -55 to +105°C.
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 19; Manufacturer Series: 2007435;
2007492-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED; Mains Connector Rating: 115/230VAC;
2007637-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105; Empty Shell: YES; Filter Feature: NO;
2007562-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature (Cel): 105;
2007637-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO; Mounting Type: BOARD;
2007492-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel; DIN Conformance: NO; IEC Conformity: NO;
2007538-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; MIL Conformity: NO; No. of Ports: 2;
2007637-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; IEC Conformity: NO;
2007567-7
TE Connectivity's 2007567-7 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
2007492-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel;
2007567-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Additional Features: 1 PORT, 20 POSITION EACH; Mounting Type: BOARD; UL Flammability Code: 94V-0;
2007567-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; EMI Shielded: NO; Additional Features: 1 PORT, 20 POSITION EACH;
2007567-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; Terminal Pitch (mm): 0.8; No. of Ports: 12;
2007399-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Pitch (mm): 0.8; MIL Conformity: NO; Mounting Type: BOARD;
2007417-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: STAGGERED; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved