Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1888653-3 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and tin termination. It has 8 contacts, rated at 1.5A signal current, suitable for board and panel mounting in commercial applications.
Median Price
$25.010
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Verical
1+ parts
$19.660
100+ parts
$18.640
1k+ parts
-
10k+ parts
TE Connectivity
$22.520
$19.940
$18.200
DigiKey
$18.204
$16.044
Mouser Electronics
$17.700
$16.050
Newark
$29.100
$22.900
$22.800
Master Electronics
$48.170
$16.540
$16.200
Chip1Stop
$17.600
Farnell
$27.050
Powell Electronics
$18.760
Nova Conductors
$16.361
Digiode
$21.394
VNN
Vyrian
Prism Electronics
TME
$19.030
IBS Electronics
$17.750
Aztec Data Supply Inc.
$10.570
Continental Prestige Electronics
$16.034
Netroflash
$15.543
$15.216
Corphita
$20.268
Kepictronics
Metaverse IC Inc.
Argo Parts USA
Perfect Parts
Compact body length makes it suitable for applications where space is limited.
High insulation resistance ensures reliable and stable signal transmission.
EMI shielding helps in reducing electromagnetic interference, ensuring better signal quality.
Optimal body width provides a balance between compactness and ease of handling.
Tin termination contact finish offers good conductivity and corrosion resistance.
PBT-Polyester insulator material provides good mechanical and thermal properties.
High maximum operating temperature ensures reliability in various environmental conditions.
Low minimum operating temperature allows for use in cold environments without performance degradation.
Thick plating thickness enhances durability and conductivity of the connector.
Tin shell finish provides good corrosion resistance and conductivity.
Specifically designed for telecom and datacom applications, ensuring compatibility and performance.
UL 94V-0 flammability rating ensures fire safety in case of any electrical faults.
High rated current capability allows for efficient signal transmission.
Black insulator color provides a professional and sleek appearance.
Ample number of contacts allow for various signal connections.
High durability rating ensures long-lasting performance in repetitive usage.
Versatile mounting options for flexible installation in different setups.
Copper alloy shell material offers a good balance between conductivity and durability.
Optimal terminal pitch for reliable signal connections.
Staggered PCB contact pattern enables better signal transmission and stability.
High mains connector rating ensures efficient power transmission.
Press fit termination type for secure and reliable connections.
Male contact gender for easy and secure mating with female connectors.
Low contact resistance ensures minimal signal loss and better conductivity.
Jack style body or shell for easy insertion and removal of connector.
Right angle mounting style for efficient space utilization and cable management.
Specific contact style designed for telecom and modular applications for optimal performance.
Optimal terminal length for secure connections and reliability.
Locking mounting option ensures secure and stable installation.
Commercial reliability rating ensures consistent performance in commercial applications.
Telecom & Datacom Connectors 1888653-3 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1888653-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 1888653 Drawing Update 24/Aug/2021 Mult Devs Marking chg 11/MAR/2020
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
10118193-0001LF
Amphenol Communications Solutions
Amphenol's 10118193-0001LF USB connector features gold flash over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. With a rated current of 1.8A, it is ideal for telecom & datacom applications requiring high durability and reliability in board mounting setups.
46765-1001
Molex
Molex 46765-1001 is a Telecom & Datacom Connector with 0.256" body length, 200VAC dielectric voltage, and GOLD termination. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it operates b/w -30 to 85°C. This male connector offers 19 contacts in a right-angle receptacle design for commercial applications.
RJHSE-5380
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: .65 inch; MIL Conformity: NO;
1827525-1
TE Connectivity 1827525-1 is a PLASTIC telecom connector with NICKEL finish. It has 4 contacts, rated for 1A signal current, and can withstand temperatures from -55 to 85 °C. Ideal for telecom & datacom applications requiring durable connectors with straight cable mounting.
5749210-7
TE Connectivity's 5749210-7 is a telecom & datacom connector with EMI shielding, polyethylene insulator, and 2 loaded rows. It operates b/w -55 to 105°C, has 68 contacts, and supports round cable mounting. Ideal for applications requiring high signal current capacity in telecommunications and data communication systems.
5000751517
Molex USB connector 5000751517 with 0.303" body length, 100VAC dielectric voltage, and 1A signal current. Ideal for telecom/datacom applications, featuring GLASS FILLED POLYETHYLENE insulator material and COPPER ALLOY contacts. Operating temperature range -40 to 85°C for commercial reliability.
ZX62D-AB-5P8(30)
Hirose Electric
Hirose Electric's ZX62D-AB-5P8(30) USB connector features gold termination, 85°C max operating temp, and 1.8A signal current. Ideal for telecom/datacom applications, with male contact gender, right angle mounting style, and locking option for surface mount PCBs.
12401826E412A
The Amphenol Communications Solutions 12401826E412A USB connector features a body length of 0.362", insulation resistance of 100M ohm, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this connector has a matte tin over nickel finish, black insulator color, and is rated for 5A signal current.
1300478009
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
632722110112
Wuerth Elektronik & Kg
632722110112 by Wurth Elektronik is a USB connector with 24 contacts, rated for 5A signal current. It features gold over nickel termination, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom & datacom applications, it has an insulation resistance of 100M ohm and operates b/w -40 to 85°C.
2301994-1
TE Connectivity's 2301994-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and operates b/w -40°C to 85°C. Ideal for telecommunications and data communication applications requiring secure board mounting.
2137160001
TELECOM AND DATACOM CONNECTOR;
44144-0005
The Molex 44144-0005 is a telecom & datacom connector with 0.52" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting applications in telecom and datacom systems, featuring a durable design with matte tin over nickel finish for reliability in commercial settings.
1419001
Phoenix Contact
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
DX07S024WJ3R400
Japan Aviation Electronics Industry
DX07S024WJ3R400 by Japan Aviation Electronics Industry is a USB connector with 24 contacts. Features gold over nickel termination, polyethylene insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring surface mount board mounting of female connectors.
1-2201855-1
TE Connectivity 1-2201855-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, male gender, and insulation resistance of 500MΩ. Ideal for telecom and datacom applications due to its durability, polarization key feature, and copper alloy shell material.
10118192-0002LF
AMPHENOL ICC
Amphenol Icc's 10118192-0002LF USB connector features a polyethylene insulator, stainless steel shell, and 5 contacts. Ideal for telecom/datacom applications, it is a female receptacle with surface mount termination and right-angle mounting on board.
ZX62-AB-5PA(31)
ZX62-AB-5PA(31) by Hirose Electric is a USB connector with gold termination, liquid crystal polymer insulator, and stainless steel shell. It has 5 contacts, rated for 1.8A signal current, suitable for telecom/datacom applications. With a right-angle mounting style and locking option, it is ideal for board and panel installations in various electronic devices.
1-406541-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Contact Pattern: RECTANGULAR; Mixed Contacts: NO;
HDRA-E68W2LFDT1EC-SL+
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1888250-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO;
1888861-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; No. of Rows Loaded: 1;
1888250-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: YES;
1888251-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 8;
1888174-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; Plating Thickness (inch): 30u;
1888506-2
TE Connectivity's 1888506-2 is an EMI shielded telecom and datacom connector with a body depth of 0.129 inch. It has a max operating temperature of 70°C and a min operating temperature of -30°C. This right angle jack connector, made of copper alloy, is suitable for board and panel mounting applications.
1888654-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Reference Standard: UL; Minimum Operating Temperature: -40 Cel; Mixed Contacts: NO;
1888811-1
TE Connectivity 1888811-1 is a Telecom & Datacom Connector with 0.744" body length, 0.702" width, and 0.809" depth. It features POLYETHYLENE insulation material, 100000000 ohm insulation resistance, and operates b/w -55°C to 105°C. Ideal for board mounting with 38 contacts in a polarized housing for signal currents up to 0.5A.
1888250-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 50u;
1888250-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: BOARD AND PANEL;
1888652-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
1888653-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .129 inch;
1888653-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; Mains Connector Rating: 1.5A; Reference Standard: UL;
1888653-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO; No. of PCB Rows: 2+2;
1888654-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; Terminal Pitch (mm): 1.02; UL Flammability Code: 94V-0;
1888655-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE; Body or Shell Style: JACK; Terminal Pitch (mm): 1.02;
1888655-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; DIN Conformance: NO; Minimum Operating Temperature: -40 Cel; Terminal Pitch (mm): 1.02;
1888655-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Shell Material: COPPER ALLOY; Rated Current - Signal: 1.5 A; Maximum Operating Temperature (Cel): 85;
1888655-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Color: BLACK; Terminal Length: .163 inch; DIN Conformance: NO;
1888655-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mains Connector Rating: 1.5A; Body or Shell Style: JACK; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved