Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; IEC Conformity: NO; No. of PCB Rows: 2+2;
Median Price
$16.970
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Verical
1+ parts
$14.080
100+ parts
$13.360
1k+ parts
-
10k+ parts
Mouser Electronics
$19.450
$12.230
PEI Genesis
Chip1Stop
$13.400
$13.000
Newark
$18.600
Master Electronics
$35.190
$12.080
$11.840
Farnell
Powell Electronics
$14.110
Digiode
$12.445
VNN
$13.100
Vyrian
Component Sense
Rapid Electronics
IBS Electronics
$13.624
TME
Corphita
$11.790
Assy Fe
Telecom & Datacom Connectors 1888653-9 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Shell Finish:
Shell Material:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1888653-9 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 1888653 Drawing 21/Jul/2016 1888653 Drawing Update 24/Aug/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1552200168
Molex
WIRE AND CABLE;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
MUSB-05-S-B-SM-A
Samtec
Samtec's MUSB-05-S-B-SM-A is a USB connector with Matte Tin finish, Liquid Crystal Polymer insulator, and 30u plating thickness. Ideal for telecom/datacom applications, it offers 5 contacts, operates b/w -50 to 85°C, and has a durability of 1500 cycles.
HDR-E26MSG1+
Honda Tsushin Kogyo
HDR-E26MSG1+ by Honda Tsushin Kogyo is a telecom & datacom connector with 26 gold contacts, nickel shell finish, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a UL Flammability Code of 94V-0 and is designed for cable mounting applications. The connector features male contact gender and solder termination for reliable connectivity in various communication systems.
RJHSE-5384
Amphenol
RJHSE-5384 by Amphenol is a Telecom & Datacom Connector with 8 contacts, made of stainless steel shell and phosphor bronze contact material. It has a body length of 0.65", width of 0.53", and depth of 0.62". Ideal for board and panel mounting applications, it features matte tin termination finish, UL flammability code 94V-0, and operates b/w -55 to 85°C.
ZX62-AB-5PA(31)
Hirose Electric
ZX62-AB-5PA(31) by Hirose Electric is a USB connector with gold termination, liquid crystal polymer insulator, and stainless steel shell. It has 5 contacts, rated for 1.8A signal current, suitable for telecom/datacom applications. With a right-angle mounting style and locking option, it is ideal for board and panel installations in various electronic devices.
10118192-0002LF
AMPHENOL ICC
Amphenol Icc's 10118192-0002LF USB connector features a polyethylene insulator, stainless steel shell, and 5 contacts. Ideal for telecom/datacom applications, it is a female receptacle with surface mount termination and right-angle mounting on board.
292304-2
TE Connectivity's 292304-2 is a USB connector with a body length of 0.474", body width of 0.435", and body depth of 0.619". It is commonly used in telecom and datacom applications, offering a rated current of 1A, durability of 1500 cycles, and a min withdrawal force of 9.7856N.
SS-6488S-A-NF-1-01
Bel Fuse
Bel Fuse SS-6488S-A-NF-1-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. It has 8 contacts in 2 rows, UL 94V-0 flammability code, and SOLDER termination. Ideal for board or panel mounting in telecom applications due to its right angle mounting style and FEMALE contact gender.
5788336-1
TE Connectivity USB Connector 5788336-1 with 0.474" body length, 0.451" width, and 0.615" depth. Insulation resistance of 1000000000 ohm, operating temperature range from -55 to 85 °C. Ideal for telecom/datacom applications with solderable retention clips for board mounting.
1827525-1
TE Connectivity 1827525-1 is a PLASTIC telecom connector with NICKEL finish. It has 4 contacts, rated for 1A signal current, and can withstand temperatures from -55 to 85 °C. Ideal for telecom & datacom applications requiring durable connectors with straight cable mounting.
HR911105A
Hanrun Electronics
HR911105A by Hanrun Electronics is a Telecom & Datacom Connector with 8 contacts, female gender, and right angle mounting style. It is used for board mounting with solder termination in telecom and datacom applications.
95522-2887
Molex 95522-2887 is a Telecom & Datacom Connector with 0.708" body length, 0.655" width, and 0.64" depth. It features insulation resistance of 500M ohm, matte tin over nickel termination contact finish, and glass-filled liquid crystal polymer insulator material. Ideal for telecom/datacom applications due to UL reference standard compliance, male contact gender, and solder termination type.
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
1051640001
Molex 1051640001 USB connector with 5 contacts, gold finish, and liquid crystal polymer insulator. Ideal for telecom & datacom applications requiring surface mount board mounting in a right angle receptacle design. Stainless steel shell with matte tin finish ensures durability and reliability.
440500003
Molex 440500003 is a telecom & datacom connector with dielectric voltage of 1000VAC. It features matte tin over nickel termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for board and panel mounting applications in telecommunications and data communication systems.
6-2301994-2
TE Connectivity 6-2301994-2 is a EMI shielded connector with 0.537" body depth and liquid crystal polymer insulator. It has 8 contacts, solder termination, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring board mounting with nickel finish shell.
MP1010RX-1000S
Kycon
The Kycon MP1010RX-1000S is a telecom & datacom connector with 1010 contacts, gold flash finish, and copper alloy material. It has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C. Ideal for commercial applications requiring reliable wire termination in round cable setups.
MRJ-5381-01
Amphenol MRJ-5381-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a right-angle mounting style, POLYETHYLENE insulator, and operates b/w -40 to 105°C. Ideal for telecom and datacom applications due to its durability of 2500 cycles and UL flammability rating of 94V-0.
09455451564
Harting Electronics & Kg
09455451564 connector by Harting Electronics & Kg is a Telecom & Datacom Connector with dimensions of 0.614" x 0.639" x 1.614". It has a rated current of 1.5A, UL reference standard, and durability of 750 cycles. Ideal for telecom and datacom applications requiring a female jack connector with IDC termination and straight mounting style.
54601908WPLF
Amphenol Communications Solutions
Amphenol's 54601908WPLF is a Telecom & Datacom Connector with 0.6" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a matte tin over nickel finish, UL-rated durability of 250 cycles, and a right-angle mounting style.
72309-8014BLF
Amphenol Icc's 72309-8014BLF is a USB connector with a right angle mounting style. It has a body length of 0.516 inch, insulation resistance of 1G ohm, and dielectric withstand voltage of 750VAC. This connector is commonly used in telecom and datacom applications for board mounting with a hole size of 0.086-0.098 inch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved