Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 2007567-7 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
Median Price
$61.308
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
AZTECH Wire
$13.540
Netroflash
$58.242
$57.016
Continental Prestige Electronics
$60.082
Corphita
Argo Parts USA
This material ensures high durability and reliability for long-term use.
With a high operating temperature, this connector can withstand harsh environmental conditions.
This allows the connector to function effectively in low temperature environments.
The empty shell design provides flexibility for customization based on specific requirements.
With multiple ports, this connector allows for versatile connectivity options.
Designed specifically for telecom and datacom applications, ensuring compatibility and reliability.
This code signifies the high flame retardant properties of the connector for added safety.
Complies with industry standards, guaranteeing quality and performance.
The high number of contacts allows for efficient data transmission and connectivity.
Simplifies installation and reduces the chances of errors during setup.
Easy to mount on a circuit board for seamless integration into electronic systems.
The small terminal pitch allows for compact design and space-saving installation.
Suitable for various voltage ratings, making it versatile for different applications.
Provides a secure connection without the need for soldering, simplifying installation.
The right angle mounting style saves space and provides a neat, organized setup.
The terminal length is optimal for ensuring a secure and stable connection.
Telecom & Datacom Connectors 2007567-7 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reference Standard:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2007567-7 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148
Rfe International
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Unitrode
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1554216004
Molex
WIRE AND CABLE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
USB-RS232-WE-1800-BT_5.0
FTDI
USB-RS232-WE-1800-BT_5.0 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
1-5406299-1
TE Connectivity 1-5406299-1 is a Telecom & Datacom Connector with EMI Shielding. It features Insulation Resistance of 500MΩ, UL Flammability Code 94V-0, and rated for 750 Cycles durability. Ideal for board and panel mounting applications requiring reliable signal connections in telecom and datacom systems.
HDR-E14MSG1+
Honda Tsushin Kogyo
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mating Contact Finish: GOLD (30) OVER NICKEL; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e4;
2086581051
Molex 2086581051 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Featuring 19 contacts, it has a body size of 0.59" x 0.244" x 0.478". Ideal for board and panel mounting applications, it offers a max operating temperature of 85°C and durability of 10k cycles.
67329-8020
Molex 67329-8020 USB connector features 4 contacts, gold termination finish, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, with glass-filled polyamide insulator material and solder termination type. Offers durability of 1500 cycles and rated current of 1A for commercial reliability.
SI-46001-F
Bel Fuse
Bel Fuse SI-46001-F is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. It has a Nickel/Tin shell finish, UL 94V-0 flammability code, and copper alloy shell material. Ideal for board mounting in telecom and datacom applications.
2294415-2
TE Connectivity 2294415-2 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. Ideal for telecom applications, it has a body size of 0.386" x 0.29" x 0.551", operates b/w -40°C to 85°C, and features right-angle mounting with surface mount termination.
67298-3091
The Molex 67298-3091 USB connector features a body size of 0.547" x 0.614" x 0.681", with glass-filled PBT insulator. It has 8 contacts, solder termination, and a 30u tin plating thickness. Ideal for telecom/datacom applications, it offers right-angle mounting with locking option for reliable commercial use.
67329-8000
Molex 67329-8000 USB connector has 0.276" body length, 0.57" width, and 0.539" depth. With 1A signal current rating, it's ideal for telecom/datacom applications. Features include tin contact finish, glass-filled polyamide insulator, and solder termination for durability.
TM5RJ2-66(50)
Hirose Electric
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Contact Material: NOT SPECIFIED;
5622-1200-ML
3m Electronic Products Division
5622-1200-ML by 3M is a telecom & datacom connector with body dimensions of 1.593" x 0.266" x 0.507". It features insulation resistance of 1G ohm, dielectric voltage withstand of 500VAC, and gold-nickel mating contacts. Ideal for commercial applications requiring reliable male connectors with surface mount termination in black insulator color.
615006138421
Wuerth Elektronik & Kg
615006138421 by Wurth Elektronik is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and staggered PCB contact pattern. Ideal for telecom and datacom applications with a durability of 500 cycles and operating temperatures ranging from -25 to 85°C.
2171830001
TELECOM AND DATACOM CONNECTOR;
CX90B1-24P
The Hirose Electric CX90B1-24P is a USB connector with 24 contacts, made of stainless steel shell finish in nickel. It features a polyethylene insulator material and surface mount termination type. Ideal for telecom & datacom applications due to its UL 94V-0 flammability code and right-angle mounting style on board.
1-2301994-1
TE Connectivity 1-2301994-1 is a telecom & datacom connector with EMI shielding. It features liquid crystal polymer insulator, nickel finish, and brass shell material. Ideal for board mounting with right-angle style, it has 8 contacts and operates b/w -40°C to 85°C.
43860-0025
Molex 43860-0025 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 0.533" body width. Ideal for board mounting with staggered PCB contact pattern, it operates b/w -40°C to 85°C and has UL94V-0 flammability rating.
10120052001
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
SI-60118-F
Bel Fuse SI-60118-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 0.85" depth. It features POLYETHYLENE insulator material, NICKEL/TIN shell finish, and 8 contacts for board and panel mounting. Ideal for telecom applications due to its polarized housing, right angle mounting style, and solder termination type.
RJE72-188-1341
Amphenol
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
208658-1001
Molex 208658-1001 is a telecom & datacom connector with 19 contacts, made of liquid crystal polymer insulator and nickel shell finish. It features female solder termination, brass shell material, and right-angle mounting style. Ideal for board-mounted applications in telecommunications and data communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2007562-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mixed Contacts: NO; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED;
2007492-7
TE Connectivity's 2007492-7 is a Telecom & Datacom Connector with -55 to 105°C operating range. Features include 40 contacts, press fit termination, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
2007394-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
2007637-8
TE Connectivity 2007637-8 is a Telecom & Datacom Connector with LIQUID CRYSTAL POLYMER insulator. Featuring 80 contacts in a 2+2 row configuration, it has a body size of 1.139" x 1.007" x 2.49". Ideal for telecom and datacom applications requiring right-angle mounting with press-fit termination at temperatures ranging from -55 to +105°C.
2007394-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Body Width: 1.007 inch;
2007435-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 19; Manufacturer Series: 2007435;
TE Connectivity 2007435-1 is a Telecom & Datacom Connector with 0.303" body length, 0.646" width, and 0.909" depth. It has 19 contacts, POLYETHYLENE insulator material, and operates b/w -20°C to 85°C. Ideal for board mounting applications in telecom and datacom systems.
2007492-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Mating Contact Finish: NOT SPECIFIED; Mains Connector Rating: 115/230VAC;
2007637-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 105; Empty Shell: YES; Filter Feature: NO;
2007562-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature (Cel): 105;
2007637-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO; Mounting Type: BOARD;
2007492-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel; DIN Conformance: NO; IEC Conformity: NO;
2007538-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; MIL Conformity: NO; No. of Ports: 2;
2007637-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mains Connector Rating: 115/230VAC; IEC Conformity: NO;
2007492-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel;
2007567-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Additional Features: 1 PORT, 20 POSITION EACH; Mounting Type: BOARD; UL Flammability Code: 94V-0;
2007567-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; EMI Shielded: NO; Additional Features: 1 PORT, 20 POSITION EACH;
2007567-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; Terminal Pitch (mm): 0.8; No. of Ports: 12;
2007562-7
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; Total No. of Contacts: 240; Panel Mount: NO;
2007562-8
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Terminal Length: .118 inch; DIN Conformance: NO; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved