Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Insertion Loss At Minimum Frequency: 6 dB; Width (mm): 57.2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
EMI Mains Filters 1-6609028-6 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Additional Features:
Approvals (V):
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
High Pot:
Insertion Loss At Maximum Frequency:
Insertion Loss At Minimum Frequency:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
1554216004
Molex
WIRE AND CABLE;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BAV99
Meritek Electronics
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SS26V-070510
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 51 MILLI HENRY; Terminal Finish: NOT SPECIFIED;
SU7VC-05011
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 1.1 MILLI HENRY; Maximum Operating Temperature: 348 Cel;
SCF19XV-220-1R6A004JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
RTEN-5060
TDK
The TDK RTEN-5060 EMI Mains Filter is a THREE PHASE filter with 60A rated current and 500V voltage. It offers high insulation resistance of 100 Mohm, UL and EN approvals, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
FN2030-10-06
Schaffner Holding Ag
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
6MV1
TE Connectivity
TE Connectivity's 6MV1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 19 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
B82722J2102N001
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
SSHB10H-R04760
KEMET Corporation's SSHB10H-R04760 is a UL-approved EMI mains filter with 250V rated voltage and 0.4A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions of 17mm x 22mm x 15.5mm.
7448026002
Wuerth Elektronik & Kg
Wurth Elektronik 7448026002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in applications requiring through hole mounting. Dimensions: L18.0xB14.0xH22.0 (mm).
FN2030-4-06
FN2030-4-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L50.5xB44.5xH22.3 mm, it operates at temperatures ranging from -25 to 100 °C and can handle high pot up to 1100V.
RN112-0.5-02-27M
The Schaffner Holding Ag RN112-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and operating temperatures from -40°C to 100°C. Its dimensions are L17.7xB17.1xH12.6 mm, making it suitable for through-hole mounting applications in various electronic devices requiring effective EMI filtering at 50/60Hz frequencies up to 0.5A current rating.
B82722J2301N001
The TDK B82722J2301N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 0.3A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
6609053-5
TE Connectivity's 6609053-5 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. It operates b/w -10°C to 40°C, suitable for PANEL MOUNT applications in EMI mains filtering at 50Hz frequency.
FN2070-3-06
FN2070-3-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 3.5A, and operates at temperatures ranging from -25°C to 100°C. This chassis mount filter is ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
10510
Murrelektronik
10510 by Murrelektronik is a THREE PHASE EMI FILTER with a rated voltage of 440 V and a rated current of 3 A. It has a compact design, measuring 39 mm in width, 65 mm in length, and 107 mm in height. This filter is suitable for DIN RAIL MOUNT installation and is approved for use according to EN standards.
FN2010-3-06
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
FIL-1S-1-6A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
B84112B0000B110
TDK's B84112B0000B110 EMI Mains Filter is UL, CSA, and ENEC-10 approved with a 250V rated voltage. It offers single-phase filtering, 10A rated current, and 2700V high pot for effective noise suppression in electronic equipment. Ideal for panel mounting applications due to its compact dimensions of L63.5xB50.8xH38.1mm.
PLA10AN1030R7R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1030R7R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 300 V Rated Voltage, and 0.7 A Rated Current. It operates b/w -25 to 120 °C and is ideal for EMI mains filtering applications due to its Through Hole Mounting type and compact dimensions of L18.0xB16.0xH17.5 mm.
SSHB10HS-30006
SSHB10HS-30006 by KEMET Corporation is a SINGLE PHASE EMI FILTER with a rated voltage of 250 V and a rated current of 3 A. It has a min insulation resistance of 100 Mohm and can operate in temperatures ranging from -25 to 130 °C. This filter is commonly used for EMI mains filtering applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved