Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTCG103JF103FT1H by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 175°C max operating temp. Ideal for temperature sensing in automotive electronics due to AEC-Q200 standard compliance and high thermal sensitivity index of 3453 K.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Semicontronic
$0.010
Aztec Data Supply Inc.
$0.078
Corohmni
$0.262
AZTECH Wire
$18.140
$17.420
$17.070
$16.730
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Advanced Electronics
Dual ended terminal placement allows for easy connectivity and flexibility in circuit design.
Metal oxide technology provides stability and reliability in varying environmental conditions.
The packing method ensures protection during transportation and storage, keeping the product safe and intact.
The high resistance value makes this product suitable for various applications where precise resistance is required.
Having 2 terminals allows for simple installation and connection in the circuit.
The Surface Mount Technology (SMT) package style enables easy integration into circuit boards.
Wraparound terminal shape provides secure and stable connections in the circuit.
The high maximum operating temperature ensures reliable performance even in demanding conditions.
High thermal sensitivity index makes this product suitable for temperature sensing applications.
The low minimum operating temperature allows for use in a wide range of environmental conditions.
Low package height makes this product suitable for compact and space-constrained designs.
Being an NTC thermistor, this product changes resistance with temperature, making it ideal for temperature sensing applications.
The 1% tolerance ensures precision and accuracy in resistance values, making this product reliable for critical applications.
Compact package length allows for easy integration into small electronic devices.
Surface mounting type enables easy and secure attachment to circuit boards.
Compliance with AEC-Q200 standard ensures high quality and reliability for automotive applications.
Narrow package width is suitable for space-constrained designs and applications.
Non-linear Resistors NTCG103JF103FT1H attributes and parameters. Explore more Non-linear Resistors devices from TDK
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Technology:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Tolerance:
NTCG103JF103FT1H Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Tesla Elektronicke Soucastky
New England Semiconductor
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
Hitano Enterprise
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
B72520T0300K062
TDK
B72520T0300K062 by TDK is a VARISTOR with 30V max circuit RMS voltage and 1.1J energy absorbing capacity. It has dual-ended terminals, SMT package style, and operates b/w -55°C to 150°C. Ideal for surge protection in electronic circuits requiring high reliability and compact design.
SMD100F-2018-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; Maximum Circuit DC Voltage: 15 V;
NCP18XQ102J03RB
Murata Manufacturing
Murata Manufacturing's NCP18XQ102J03RB is a Non-linear Resistor with 1000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3650K. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package. Operating temperature ranges from -40 to 125°C.
1812L150/12DR
1812L150/12DR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, dual-ended terminals, and SMT package style. It is designed for overcurrent protection applications with a max operating temperature of 85°C and min of -40°C. This rectangular package thermistor has a compact size of 4.73mm x 3.41mm x 1.25mm for surface mounting method.
B57237S0100M000
TDK B57237S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 3.1 W power dissipation. It is used for soft start applications at temperatures ranging from -55°C to 170°C. The radial package has a height of 22 mm, length of 15 mm, and width of 7 mm for through-hole mounting.
LVR100S-240-2
LVR100S-240-2 by Littelfuse is a PTC resettable fuse used for overcurrent protection. It has a resistance of 0.218 ohm and can operate at temperatures ranging from -40 to 85 °C. Its radial terminal placement and through hole mounting make it easy to install in various applications.
RXEF030-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
B57235-S609-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6 ohm; Shape (Package): DISK PACKAGE; Terminal Shape: WIRE; Thermistor Application: SOFT START;
TMOV14RP275E
TMOV14RP275E by Littelfuse is a VARISTOR with 275V max circuit RMS voltage and 110J energy absorption. It operates b/w -55°C to 125°C, ideal for SURGE PROTECTION in various applications. Featuring METAL OXIDE FILM tech, it has radial terminal placement and measures 17mm in height and length, with a width of 9.5mm.
RXEF050-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Terminal Shape: WIRE; JESD-609 Code: e3;
11026889-00
TE Connectivity's 11026889-00 is a non-linear resistor with 10000 ohm resistance, rated for temperatures from -55 to 90 °C. It features radial terminal placement and chassis mount package style, ideal for temperature sensing applications due to its thermal sensitivity index of 3694 K.
V10E25P
V10E25P by Littelfuse is a VARISTOR with METAL OXIDE FILM tech, 13J energy capacity, and 25V RMS voltage. Ideal for surge protection in electronics due to its radial package style, -40 to 85°C operating temp range, and UL/CUL/TUV certifications.
NTCS0603E3103JHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
RXEF250-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel;
VCAS06AG183R0YAT3A
KYOCERA AVX's VCAS06AG183R0YAT3A is a VARISTOR with 18V operating voltage, 14V max RMS voltage, and -55 to 125 °C temp range. Ideal for AEC-Q200 compliant automotive applications due to its SMT package style and dual-ended terminal placement.
NTC0805J100K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
V33ZA1P
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
ERTJ0ER333J
Panasonic
Panasonic ERTJ0ER333J is a NTC thermistor with 33000 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4300 K, operating b/w -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
RXEF020
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2.75 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Terminal Placement: RADIAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTCG103JF103FT1S
NTCG103JF103FT1S by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 5V operating voltage. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3435 K and AEC-Q200 reference standard compliance. Package style is SMT with dual-ended terminals for surface mounting type.
NTCG163JF103FT1S
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Thermal Sensitivity Index: 3453 K;
NTCG103JF103FT1
NTCG103JF103FT1 by TDK is a 10000 ohm NTC thermistor with 1% tolerance, operating at -40 to 125 °C. It has a rated power dissipation of 0.1 W and is used in temperature sensing applications due to its thermal sensitivity index of 3435 K.
NTCG163JF103FT1
NTCG163JF103FT1 by TDK is a 10000 ohm NTC thermistor with 1% tolerance, suitable for temperature sensing applications. It operates b/w -40 to 125 °C and has a thermal sensitivity index of 3435 K. This chip resistor features dual-ended terminals in a rectangular SMT package.
NTCG163JF103FT1H
NTCG163JF103FT1H by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and -40 to 175 °C operating temperature range. Ideal for automotive applications meeting AEC-Q200 standard, it features dual-ended terminals in a surface mount package style.
NTCG164BH103HT1
NTCG164BH103HT1 by TDK is a NTC thermistor with 10000 ohm resistance, 3% tolerance, and 125°C max operating temp. Ideal for temperature sensing applications due to its high thermal sensitivity index of 4100 K. Features SMT package style and surface mounting type.
NTCG163JF103FTDS
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Reference Standard: AEC-Q200;
NTCG103JX103DT1S
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Minimum Operating Temperature: -40 Cel;
NTCG063UH103HTBX
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
NTCG203NH103JT1S
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Height (Package): .7 mm;
NTCG103JF103FTDS
NTCG103JF103FTDS by TDK is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3435 K. Features SMT package style and surface mounting type.
NTCG104BF473FT1X
NTCG104BF473FT1X by TDK is a NTC thermistor with 47000 ohm resistance, 1% tolerance, and operating voltage of 5V. Ideal for temperature sensing applications due to its thermal sensitivity index of 4114 K and max operating temperature of 125°C. Features surface mount package style with dual-ended terminals for easy installation.
NTCG164LH473JT1S
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Terminal Finish: TIN OVER NICKEL;
NTCG164QH474HT1
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
NTCG203NH103JTDS
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Technology: METAL OXIDE;
NTCG104EF104FT1X
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NTCG104LH333JT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Terminal Shape: WRAPAROUND;
NTCG063JF103FTB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NTCG163JX103DT1S
NTCG163JX103DT1S by TDK is a SMT NTC thermistor with 10000 ohm resistance, 0.5% tolerance, and -40 to 150 °C operating temp. Ideal for automotive applications meeting AEC-Q200 standard due to its thermal sensitivity index of 3453 K.
NTCG103JF103HT1S
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 3 %; Terminal Placement: DUAL ENDED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved