Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TTC-5036 by Tamura is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 287Ω. It operates b/w -20°C to 85°C, suitable for telecom applications. With dimensions of 12.5mm x 9.6mm x 7.6mm, it's a surface mount transformer ideal for frequencies ranging from 0.2kHz to 4kHz.
Median Price
$4.590
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.330
100+ parts
$3.260
1k+ parts
$3.030
10k+ parts
$2.910
DigiKey
$3.744
-
Verical
$9.126
$4.823
Nova Conductors
$5.870
Vyrian
Electro Sonic
$3.420
$2.720
$2.400
Elcom Components
Aztec Data Supply Inc.
$2.037
Aranea Global
$5.753
$5.522
Continental Prestige Electronics
Perfect Parts
Argo Parts USA
Having EN and UL approvals ensures that the product meets international safety and quality standards, giving customers peace of mind when using the transformer.
The impedance value of 287 OHMS on the secondary side allows for efficient power transfer and signal integrity in telecom applications.
With a maximum operating temperature of 85°C, this transformer can withstand high temperature environments without compromising performance.
The ability to operate at temperatures as low as -20°C makes this transformer suitable for use in a wide range of temperature conditions.
The compact height of 7.6 mm makes this transformer suitable for applications where space is limited.
The slim width of 9.6 mm further enhances the space-saving design of this transformer.
The low minimum operating frequency of 0.2 KHz ensures that this transformer can handle a wide range of telecom signals.
Being specifically designed as a telecom transformer means that it is optimized for telecom applications, providing reliable performance.
The surface mount feature makes installation of this transformer quick and easy, ideal for automated assembly processes.
The length of 12.5 mm strikes a balance between compact size and functionality, making it versatile for various telecom setups.
The high maximum operating frequency of 4 KHz allows this transformer to handle high-speed data transmission in telecom networks.
The impedance value of 600 OHMS on the primary side ensures efficient power transfer and impedance matching in telecom systems.
Telecom Transformers TTC-5036 attributes and parameters. Explore more Telecom Transformers devices from Tamura
Additional Features:
Approvals (V):
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Impedance (Primary):
Impedance (Secondary):
Transformer Type:
Width:
TTC-5036 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Multiple Devices Location 10/Sep/2020
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Gulf Semiconductor
Infineon Technologies
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
Microsemi
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
P1200
Etal Group Ab
P1200 by Etal Group Ab is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates b/w 0-70°C, with a max frequency of 10 KHz. Ideal for telecom applications due to its through-hole mounting feature and CSA/IEC/UL approvals.
LM-LP-1004L
Bourns
LM-LP-1004L by Bourns is a UL-approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting applications in telecom systems with frequencies ranging from 0.2kHz to 3.5kHz.
T-1281
Rhombus Industries
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: T-1281; Additional Features: DATA COUPLING;
750510476
Wuerth Elektronik & Kg
Wurth Elektronik's 750510476 is a Telecom Transformer with approvals from CSA, EN, IEC, and UL. It operates b/w -40°C to 125°C and has dimensions of 10.16mm x 13.72mm x 19.8mm. Ideal for telecom applications due to its THROUGH HOLE MOUNTED design and high-quality specifications.
MET-59
Tamura
MET-59 by Tamura is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 600Ω CT. It has a max DC unbalance current of 3mA, operates from 0.3 KHz to 100 KHz, and is through-hole mounted. Ideal for telecom applications requiring compact dimensions (L10.4xB7.87xH11.8 mm).
TTC-105-1
TTC-105-1 by Tamura is a Telecom Transformer with 600Ω primary impedance, operating frequency range of 0.66 KHz to 3.5 KHz. It is approved by CSA and UL for applications in telecom equipment due to its compact size (20.7mm x 16mm x 19mm) and through-hole mounting feature.
PE-65389NL
Pulse Electronics
PE-65389NL by Pulse Electronics is a UL approved telecom transformer with 1500uH inductance and 1500V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm, suitable for signal applications with operating temperatures from 0 to 70°C.
PE-65612NL
PE-65612NL by Pulse Electronics is a 1:1 turns ratio telecom transformer with 2000V isolation voltage. It features 25ns max pulse rise time and 2500uH inductance, suitable for signal applications. With dimensions of L12.70xB8.89xH6.35 (mm), it operates b/w -40 to +85 °C temperature range.
SM-LP-5001
Bourns SM-LP-5001 is a Telecom Transformer with 600Ω Impedance, 2 dB Insertion Loss, and 3800000μH Inductance. Ideal for SIGNAL applications, it operates b/w -20°C to 85°C with a frequency range of 0.2 kHz to 4 kHz.
8010
Api Technologies
8010 by Api Technologies is a Telecom Transformer designed for surface mount applications. With dimensions of 12.827mm x 7.112mm x 6.502mm, it operates b/w -40°C to 85°C temperatures efficiently in TAPE & REEL packing method. Ideal for telecom equipment due to its compact size and temperature range suitability.
TTPC-13
Stancor Products
Stancor Products' TTPC-13 is a Telecom Transformer with 600 OHMS CT SPLIT impedance, suitable for applications requiring 90 mA DC unbalance current. With a max operating temperature of 105°C, this transformer is designed for through-hole mounting in telecom systems operating b/w 0.3 KHz to 3.5 KHz frequencies.
MET-31
MET-31 by Tamura is a Telecom Transformer with Impedance 600Ω CT, suitable for frequencies from 0.3 KHz to 100 KHz. With a compact size of 10.4mm x 7.87mm x 11.8mm, it operates b/w -20°C to 85°C making it ideal for telecom applications requiring reliable signal transmission. The transformer features Through Hole Mounting and Tin (Sn) terminal finish for secure installation in various electronic devices.
T6003NLT
T6003NLT by Pulse Electronics is a Telecom Transformer with primary and secondary impedance of 600Ω. It features surface mounting, dimensions of L13.46xB17.65xH12.32 mm, and comes in tray packing method. Ideal for telecom applications requiring precise impedance matching in compact spaces.
MET-42
Tamura MET-42 is a Telecom Transformer with impedance of 150Ω, operating freq. range from 0.3KHz to 100KHz. With dimensions 11.8mm x 7.87mm x 10.4mm, it's ideal for telecom applications requiring through-hole mounting in temp range -20°C to 85°C.
T3001NLT
T3001NLT by Pulse Electronics is a UL approved telecom transformer with an isolation voltage of 1500V. It operates b/w -40°C to 85°C, has dimensions of L7.62xB7.0xH6.35 (mm), and a turns ratio of 1:1. Ideal for signal applications, it supports frequencies from 200kHz to 340MHz and features surface mounting method in tape & reel packaging.
TG07-0356NSRL
Halo Electronics
The Halo Electronics TG07-0356NSRL is a Telecom Transformer with approvals from EN and UL. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. This surface mount transformer has dimensions of 5.08mm x 7.112mm x 8.128mm, ideal for compact designs.
TTC-5024
TTC-5024 by Tamura is a Telecom Transformer with approvals from EN and UL. It operates b/w -20°C to 85°C, suitable for telecom applications. With impedance of 600Ω, it supports frequencies from 0.2 KHz to 4 KHz in a compact size of 5.08mm x 8.5mm x 16.3mm for surface mount installation.
8001
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 12.827 mm;
X8390-A
Coilcraft
Coilcraft X8390-A is a UL approved telecom transformer with dimensions L17.75xB13.46xH12.7 (mm). It operates b/w -40°C to 85°C, suitable for surface mount applications in telecommunications equipment. Packaged in tape & reel, it offers reliable performance and compact design for various telecom devices.
TTC-5020
TTC-5020 by Tamura is a Telecom Transformer with approvals from CSA and UL. It has a height of 13.8mm, width of 22.5mm, and impedance of 600Ω on the primary side. This transformer type is suitable for applications requiring frequencies ranging from 0.6 KHz to 3.5 KHz, featuring through-hole mounting for easy installation in various telecom devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TTC-5023
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: TTC-5023; Approvals (V): UL; Impedance (Primary): 600 OHMS; No. of Winding (Secondary): 1;
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Minimum Operating Temperature: -20 Cel; Length: 16.3 mm;
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 600 OHMS; Length: 23.1 mm; Minimum Operating Frequency: .6 KHz;
TTC-5027
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 30000 OHMS; Length: 12.5 mm; Maximum Operating Temperature: 85 Cel;
TTC-5035
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Length: 12.5 mm; Impedance (Secondary): 346 OHMS;
TTC-5033
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 10000 OHMS; Impedance (Secondary): 10000 OHMS; Width: 9.6 mm;
TTC-5034
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 20000 OHMS; Maximum Operating Temperature: 85 Cel; Height: 7.6 mm;
TTC-5025
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Maximum Operating Temperature: 85 Cel; Width: 9.6 mm;
TTC-5032
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Maximum Operating Frequency: 4 KHz; Additional Features: TURNS RATIO: 1:1;
TTC-5037
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Height: 7.6 mm; Additional Features: TURNS RATIO: 1:1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved