Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TTC-5023 by Tamura is a UL approved telecom transformer with 600Ω impedance, 2 dB insertion loss, and 3800000μH inductance. Ideal for signal applications, this surface mount transformer has dimensions of L12.5xB9.6xH7.59mm and operates b/w 0.2 KHz to 4 KHz frequencies.
Median Price
$9.126
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$4.823
Nova Conductors
$2.612
Vyrian
Semtec, LLC
IBS Electronics
$5.554
$4.684
$4.586
Semi Source
LWI Electronics Inc
AZTECH Wire
$1.070
$1.030
$1.010
$0.990
Argo Parts USA
Continental Prestige Electronics
$2.560
Bastille Electronics
$2.481
$2.357
$2.325
Aztec Data Supply Inc.
$3.652
Perfect Parts
ChipstoGo Electronic ltd
This product is UL approved, ensuring that it meets safety and quality standards.
The secondary impedance of 600 OHMS allows for efficient signal transmission and reception.
With a low insertion loss of 2 dB, this transformer minimizes signal distortion and maintains signal integrity.
The high primary inductance of 3800000 uH enables effective signal conversion and transmission.
Compact dimensions make this transformer suitable for space-constrained applications.
Designed specifically for signal transmission, ensuring optimal performance in telecom applications.
The load resistance of 115 ohms is ideal for matching impedance and ensuring efficient signal transfer.
Can operate effectively at low frequencies, making it suitable for a wide range of telecom applications.
Specifically designed for telecom applications, ensuring compatibility and reliability in telecommunications systems.
The surface mount design allows for easy installation on PCBs, saving space and simplifying assembly.
The 1:1 turns ratio ensures equal voltage levels between primary and secondary circuits, maintaining signal integrity.
Capable of operating at high frequencies, making it suitable for a variety of telecom applications.
The primary impedance of 600 OHMS is well-matched for signal transmission and reception in telecom systems.
Telecom Transformers TTC-5023 attributes and parameters. Explore more Telecom Transformers devices from Tamura
Additional Features:
Application:
Approvals (V):
Height:
Insertion Loss:
Length:
Load Resistance:
Manufacturer Series:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Dimensions:
Impedance (Primary):
Inductance (Primary):
Impedance (Secondary):
Sub-Category:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
TTC-5023 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Multiple Devices Location 10/Sep/2020
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
TTC-5023
Tamura
B4064
Pulse Electronics
B4064 by Pulse Electronics is a Telecom Transformer with dimensions of 13.46mm x 13.11mm x 12.07mm, suitable for surface mount applications. It has a max operating temperature of 85°C and min of -40°C, making it ideal for telecom equipment requiring compact and efficient transformers in various temperature conditions.
T6003NLT
T6003NLT by Pulse Electronics is a Telecom Transformer with primary and secondary impedance of 600Ω. It features surface mounting, dimensions of L13.46xB17.65xH12.32 mm, and comes in tray packing method. Ideal for telecom applications requiring precise impedance matching in compact spaces.
TTC-5024
TTC-5024 by Tamura is a Telecom Transformer with approvals from EN and UL. It operates b/w -20°C to 85°C, suitable for telecom applications. With impedance of 600Ω, it supports frequencies from 0.2 KHz to 4 KHz in a compact size of 5.08mm x 8.5mm x 16.3mm for surface mount installation.
SM-LP-5002E
Bourns
Bourns SM-LP-5002E is a Telecom Transformer with impedance of 600Ω, operating frequency range from 0.2KHz to 4KHz. It is UL approved, surface mountable transformer suitable for telecom applications due to its compact dimensions of L12.5xB9.6xH7.36 (mm).
TTPC-2
Stancor Products
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
LM-LP-1004L
LM-LP-1004L by Bourns is a UL-approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting applications in telecom systems with frequencies ranging from 0.2kHz to 3.5kHz.
SM-LP-5001E
The Bourns SM-LP-5001E is a telecom transformer with 600Ω impedance, 2dB insertion loss, and UL approval. Ideal for matching applications, it operates b/w -20°C to 85°C with a frequency range of 0.2kHz to 4kHz. This surface mount transformer has dimensions of L12.5xB9.6xH7.36mm and features a turns ratio of 1:1.
AS8456-A
Coilcraft
Coilcraft's AS8456-A is a UL-approved telecom transformer with dimensions of 17.91mm x 13.46mm x 12.7mm, operating b/w -40°C to 85°C. This surface mount transformer is ideal for telecom applications due to its compact size and temperature range suitability.
50503
Wuerth Elektronik & Kg
50503 by Wurth Elektronik is a Telecom Transformer with primary impedance of 135Ω and secondary impedance of 40.2Ω. It has dimensions of L13.97xB13.97xH12.7 mm, suitable for through hole mounting applications in telecom equipment. Approved by IEC and UL, it operates b/w -40°C to 85°C, making it ideal for various telecommunications devices.
MET-42
Tamura MET-42 is a Telecom Transformer with impedance of 150Ω, operating freq. range from 0.3KHz to 100KHz. With dimensions 11.8mm x 7.87mm x 10.4mm, it's ideal for telecom applications requiring through-hole mounting in temp range -20°C to 85°C.
TTC-5035
The Tamura TTC-5035 is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 346Ω. It operates b/w -20°C to 85°C, suitable for telecom applications. This surface mount transformer has dimensions of 12.5mm x 9.6mm x 7.6mm and supports frequencies from 0.2kHz to 4kHz, approved by EN and UL standards.
C2202
TE Connectivity's C2202 is a telecom transformer with dimensions of L13.97xB13.97xH12.7 (mm). It has approvals from BABT, CSA, IEC, and UL. This THROUGH HOLE MOUNTED transformer is ideal for telecom applications due to its compact size and industry-standard certifications.
TTC-105-1
TTC-105-1 by Tamura is a Telecom Transformer with 600Ω primary impedance, operating frequency range of 0.66 KHz to 3.5 KHz. It is approved by CSA and UL for applications in telecom equipment due to its compact size (20.7mm x 16mm x 19mm) and through-hole mounting feature.
PE-65612NL
PE-65612NL by Pulse Electronics is a 1:1 turns ratio telecom transformer with 2000V isolation voltage. It features 25ns max pulse rise time and 2500uH inductance, suitable for signal applications. With dimensions of L12.70xB8.89xH6.35 (mm), it operates b/w -40 to +85 °C temperature range.
TTPC-13
Stancor Products' TTPC-13 is a Telecom Transformer with 600 OHMS CT SPLIT impedance, suitable for applications requiring 90 mA DC unbalance current. With a max operating temperature of 105°C, this transformer is designed for through-hole mounting in telecom systems operating b/w 0.3 KHz to 3.5 KHz frequencies.
B1056
B1056 by Pulse Electronics is a Telecom Transformer with dimensions 17.65mm x 13.46mm x 12.32mm, suitable for surface mount applications. It has a max DC unbalance current of 100mA and operates b/w -40°C to 85°C, making it ideal for telecom systems requiring compact and efficient transformers.
LM-LP-1005L
Bourns LM-LP-1005L is a UL approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting in applications requiring frequencies from 0.2kHz to 3.5kHz.
T3001NLT
T3001NLT by Pulse Electronics is a UL approved telecom transformer with an isolation voltage of 1500V. It operates b/w -40°C to 85°C, has dimensions of L7.62xB7.0xH6.35 (mm), and a turns ratio of 1:1. Ideal for signal applications, it supports frequencies from 200kHz to 340MHz and features surface mounting method in tape & reel packaging.
P2781
Etal Group Ab
P2781 by Etal Group Ab is a Telecom Transformer with dimensions L13.0XB9.0XH7.0 (mm) and approvals from IEC and UL. It operates b/w -25 to 85 °C, with max freq of 4 KHz and min freq of 0.2 KHz. Ideal for telecom applications due to its surface mount feature and max DC unbalance current of 0.1 mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Minimum Operating Temperature: -20 Cel; Length: 16.3 mm;
TTC-5020
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 600 OHMS; Length: 23.1 mm; Minimum Operating Frequency: .6 KHz;
TTC-5027
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 30000 OHMS; Length: 12.5 mm; Maximum Operating Temperature: 85 Cel;
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Length: 12.5 mm; Impedance (Secondary): 346 OHMS;
TTC-5036
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Width: 9.6 mm; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved