Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Length: 19.84 mm; Maximum DC Unbalance Current: 0 mA; Impedance (Secondary): 600 OHMS;
Median Price
$6.950
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Newark
1+ parts
100+ parts
$5.150
1k+ parts
$4.730
10k+ parts
-
Nova Conductors
$6.000
Vyrian
Elcom Components
Continental Prestige Electronics
$5.880
Netroflash
$5.700
$5.580
AZTECH Wire
$10.177
Argo Parts USA
Assy Fe
Telecom Transformers TTPC-2 attributes and parameters. Explore more Telecom Transformers devices from Stancor Products
Maximum DC Unbalance Current:
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Impedance (Primary):
Impedance (Secondary):
Transformer Type:
Width:
TTPC-2 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
TTC-5020
Tamura
TTC-5020 by Tamura is a Telecom Transformer with approvals from CSA and UL. It has a height of 13.8mm, width of 22.5mm, and impedance of 600Ω on the primary side. This transformer type is suitable for applications requiring frequencies ranging from 0.6 KHz to 3.5 KHz, featuring through-hole mounting for easy installation in various telecom devices.
TTPC-6
Stancor Products
The Stancor Products TTPC-6 is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 600Ω CT. It has a max operating frequency of 3.5 KHz, suitable for telecom applications. With a height of 19.05mm and through hole mounting feature, it is designed to operate at temperatures up to 105°C.
P2781
Etal Group Ab
P2781 by Etal Group Ab is a Telecom Transformer with dimensions L13.0XB9.0XH7.0 (mm) and approvals from IEC and UL. It operates b/w -25 to 85 °C, with max freq of 4 KHz and min freq of 0.2 KHz. Ideal for telecom applications due to its surface mount feature and max DC unbalance current of 0.1 mA.
8001
Api Technologies
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 12.827 mm;
MET-32
The Tamura MET-32 is a telecom transformer with max freq of 100 KHz, impedance of 600Ω, and through-hole mounting. It operates b/w -20°C to 85°C making it suitable for telecom applications requiring high-frequency signal transmission in compact spaces. With dimensions of 11.8mm x 7.87mm x 10.4mm, it's ideal for space-constrained designs in telecommunications equipment.
8101
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 12.7 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 8.89 mm;
LM-LP-1005L
Bourns
Bourns LM-LP-1005L is a UL approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting in applications requiring frequencies from 0.2kHz to 3.5kHz.
AS7787-A
Coilcraft
Coilcraft AS7787-A is a UL approved telecom transformer with dimensions 13.97mm x 13.97mm x 12.7mm. It operates b/w -40°C to 85°C, suitable for through-hole mounting applications in telecommunications equipment.
750510476
Wuerth Elektronik & Kg
Wurth Elektronik's 750510476 is a Telecom Transformer with approvals from CSA, EN, IEC, and UL. It operates b/w -40°C to 125°C and has dimensions of 10.16mm x 13.72mm x 19.8mm. Ideal for telecom applications due to its THROUGH HOLE MOUNTED design and high-quality specifications.
TTPC-8
Stancor Products' TTPC-8 is a Telecom Transformer with primary and secondary impedance of 600Ω CT. With dimensions of L19.84xB16.51xH18.8 (mm), it operates b/w 0.3-3.5 KHz frequencies, suitable for through-hole mounting in telecom applications at temperatures up to 105°C.
MET-42
Tamura MET-42 is a Telecom Transformer with impedance of 150Ω, operating freq. range from 0.3KHz to 100KHz. With dimensions 11.8mm x 7.87mm x 10.4mm, it's ideal for telecom applications requiring through-hole mounting in temp range -20°C to 85°C.
LM-NP-1001-B1L
LM-NP-1001-B1L by Bourns is a UL approved telecom transformer with 600Ω impedance, 1.5 dB insertion loss, and 2800000μH inductance. Ideal for SIGNAL applications, it operates b/w -10°C to 60°C with dimensions of L17.7xB17.7xH12.6 mm for through-hole mounting.
8010
8010 by Api Technologies is a Telecom Transformer designed for surface mount applications. With dimensions of 12.827mm x 7.112mm x 6.502mm, it operates b/w -40°C to 85°C temperatures efficiently in TAPE & REEL packing method. Ideal for telecom equipment due to its compact size and temperature range suitability.
51481
The Wurth Elektronik 51481 Telecom Transformer has dimensions of L13.97xB13.97xH12.7 (mm) and operates b/w -40 to 85°C. With primary impedance of 100Ω, it is IEC approved for through-hole mounting applications in telecom equipment.
MET-46
Tamura's MET-46 is a telecom transformer with dimensions of L10.4xB7.87xH11.8 (mm). It has a max DC unbalance current of 3 mA and primary impedance of 600Ω. Ideal for through-hole mounting applications in telecommunications due to its compact size and impedance specifications.
SM-LP-5002E
Bourns SM-LP-5002E is a Telecom Transformer with impedance of 600Ω, operating frequency range from 0.2KHz to 4KHz. It is UL approved, surface mountable transformer suitable for telecom applications due to its compact dimensions of L12.5xB9.6xH7.36 (mm).
TTPC-2
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
TTC-105-1
TTC-105-1 by Tamura is a Telecom Transformer with 600Ω primary impedance, operating frequency range of 0.66 KHz to 3.5 KHz. It is approved by CSA and UL for applications in telecom equipment due to its compact size (20.7mm x 16mm x 19mm) and through-hole mounting feature.
AS8456-A
Coilcraft's AS8456-A is a UL-approved telecom transformer with dimensions of 17.91mm x 13.46mm x 12.7mm, operating b/w -40°C to 85°C. This surface mount transformer is ideal for telecom applications due to its compact size and temperature range suitability.
SM-LP-5001
Bourns SM-LP-5001 is a Telecom Transformer with 600Ω Impedance, 2 dB Insertion Loss, and 3800000μH Inductance. Ideal for SIGNAL applications, it operates b/w -20°C to 85°C with a frequency range of 0.2 kHz to 4 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TTPC-13
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Maximum DC Unbalance Current: 90 mA; Width: 19.05 mm; Maximum Operating Temperature: 105 Cel;
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS CT; Height: 18.8 mm; Maximum Operating Frequency: 3.5 KHz; Width: 16.51 mm;
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Maximum Operating Frequency: 3.5 KHz; Impedance (Secondary): 600 OHMS CT; Width: 16.51 mm;
TTPC-11
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 4000 OHMS; Maximum DC Unbalance Current: 0 mA; Impedance (Secondary): 600 OHMS; Minimum Operating Frequency: .3 KHz;
TTPC-15
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Maximum DC Unbalance Current: 80 mA; Minimum Operating Frequency: .3 KHz; Length: 41.91 mm;
TTPC-1
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS CT; Impedance (Secondary): 600 OHMS CT; Minimum Operating Frequency: .3 KHz; Maximum DC Unbalance Current: 0 mA;
TTPC-3
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS CT; Maximum Operating Temperature: 105 Cel; Impedance (Secondary): 600 OHMS CT; Height: 12.45 mm;
TTPC-5
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 4000 OHMS; Height: 12.45 mm; Impedance (Secondary): 600 OHMS; Maximum Operating Frequency: 3.5 KHz;
TTPC-7
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Maximum Operating Temperature: 105 Cel; Maximum DC Unbalance Current: 0 mA; Height: 18.8 mm;
TTPC-9
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Impedance (Primary): 600 OHMS; Length: 26.42 mm; Maximum Operating Frequency: 3.5 KHz; Width: 24.33 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved