Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 20000 OHMS; Maximum Operating Temperature: 85 Cel; Height: 7.6 mm;
Median Price
$7.020
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Master Electronics
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$2.500
Verical
IBS Electronics
$3.370
$3.158
$2.975
GLYN GmbH & Co. KG
Telecom Transformers TTC-5034 attributes and parameters. Explore more Telecom Transformers devices from Tamura
Additional Features:
Approvals (V):
Height:
Length:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Impedance (Primary):
Impedance (Secondary):
Transformer Type:
Width:
TTC-5034 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Pro-an Electronic
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
AS7787-A
Coilcraft
Coilcraft AS7787-A is a UL approved telecom transformer with dimensions 13.97mm x 13.97mm x 12.7mm. It operates b/w -40°C to 85°C, suitable for through-hole mounting applications in telecommunications equipment.
PE-65870NL
Pulse Electronics
PE-65870NL by Pulse Electronics is a UL approved telecom transformer with dimensions L12.83xB7.11xH6.22 mm. It operates b/w 0-70°C, has matte tin terminal finish, and is surface mountable. Ideal for telecom applications requiring compact and efficient transformers in electronic devices.
T6003NLT
T6003NLT by Pulse Electronics is a Telecom Transformer with primary and secondary impedance of 600Ω. It features surface mounting, dimensions of L13.46xB17.65xH12.32 mm, and comes in tray packing method. Ideal for telecom applications requiring precise impedance matching in compact spaces.
PE-65612NL
PE-65612NL by Pulse Electronics is a 1:1 turns ratio telecom transformer with 2000V isolation voltage. It features 25ns max pulse rise time and 2500uH inductance, suitable for signal applications. With dimensions of L12.70xB8.89xH6.35 (mm), it operates b/w -40 to +85 °C temperature range.
TTC-5020
Tamura
TTC-5020 by Tamura is a Telecom Transformer with approvals from CSA and UL. It has a height of 13.8mm, width of 22.5mm, and impedance of 600Ω on the primary side. This transformer type is suitable for applications requiring frequencies ranging from 0.6 KHz to 3.5 KHz, featuring through-hole mounting for easy installation in various telecom devices.
8025
Api Technologies
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Height: 5.08 mm; Maximum Operating Temperature: 85 Cel; Length: 8.128 mm;
T-1281
Rhombus Industries
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: T-1281; Additional Features: DATA COUPLING;
B1056
B1056 by Pulse Electronics is a Telecom Transformer with dimensions 17.65mm x 13.46mm x 12.32mm, suitable for surface mount applications. It has a max DC unbalance current of 100mA and operates b/w -40°C to 85°C, making it ideal for telecom systems requiring compact and efficient transformers.
51481
Wuerth Elektronik & Kg
The Wurth Elektronik 51481 Telecom Transformer has dimensions of L13.97xB13.97xH12.7 (mm) and operates b/w -40 to 85°C. With primary impedance of 100Ω, it is IEC approved for through-hole mounting applications in telecom equipment.
B4064
B4064 by Pulse Electronics is a Telecom Transformer with dimensions of 13.46mm x 13.11mm x 12.07mm, suitable for surface mount applications. It has a max operating temperature of 85°C and min of -40°C, making it ideal for telecom equipment requiring compact and efficient transformers in various temperature conditions.
MET-59
MET-59 by Tamura is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 600Ω CT. It has a max DC unbalance current of 3mA, operates from 0.3 KHz to 100 KHz, and is through-hole mounted. Ideal for telecom applications requiring compact dimensions (L10.4xB7.87xH11.8 mm).
TG07-0356NSRL
Halo Electronics
The Halo Electronics TG07-0356NSRL is a Telecom Transformer with approvals from EN and UL. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. This surface mount transformer has dimensions of 5.08mm x 7.112mm x 8.128mm, ideal for compact designs.
8001
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 12.827 mm;
B1060
TELECOM TRANSFORMER; Manufacturer Series: B1060;
SM-LP-5001E
Bourns
The Bourns SM-LP-5001E is a telecom transformer with 600Ω impedance, 2dB insertion loss, and UL approval. Ideal for matching applications, it operates b/w -20°C to 85°C with a frequency range of 0.2kHz to 4kHz. This surface mount transformer has dimensions of L12.5xB9.6xH7.36mm and features a turns ratio of 1:1.
TTPC-2
Stancor Products
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
TTC-5036
TTC-5036 by Tamura is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 287Ω. It operates b/w -20°C to 85°C, suitable for telecom applications. With dimensions of 12.5mm x 9.6mm x 7.6mm, it's a surface mount transformer ideal for frequencies ranging from 0.2kHz to 4kHz.
SM-LP-5002E
Bourns SM-LP-5002E is a Telecom Transformer with impedance of 600Ω, operating frequency range from 0.2KHz to 4KHz. It is UL approved, surface mountable transformer suitable for telecom applications due to its compact dimensions of L12.5xB9.6xH7.36 (mm).
T3001NLT
T3001NLT by Pulse Electronics is a UL approved telecom transformer with an isolation voltage of 1500V. It operates b/w -40°C to 85°C, has dimensions of L7.62xB7.0xH6.35 (mm), and a turns ratio of 1:1. Ideal for signal applications, it supports frequencies from 200kHz to 340MHz and features surface mounting method in tape & reel packaging.
LM-NP-1001-B1L
LM-NP-1001-B1L by Bourns is a UL approved telecom transformer with 600Ω impedance, 1.5 dB insertion loss, and 2800000μH inductance. Ideal for SIGNAL applications, it operates b/w -10°C to 60°C with dimensions of L17.7xB17.7xH12.6 mm for through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved