Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN, UL; Impedance (Primary): 600 OHMS; Height: 7.6 mm; Additional Features: TURNS RATIO: 1:1;
Median Price
$8.085
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Master Electronics
1+ parts
100+ parts
-
1k+ parts
$7.020
10k+ parts
$2.500
Telecom Transformers TTC-5037 attributes and parameters. Explore more Telecom Transformers devices from Tamura
Additional Features:
Approvals (V):
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Impedance (Primary):
Impedance (Secondary):
Transformer Type:
Width:
TTC-5037 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Hy Electronic
TTC-5020
Tamura
TTC-5020 by Tamura is a Telecom Transformer with approvals from CSA and UL. It has a height of 13.8mm, width of 22.5mm, and impedance of 600Ω on the primary side. This transformer type is suitable for applications requiring frequencies ranging from 0.6 KHz to 3.5 KHz, featuring through-hole mounting for easy installation in various telecom devices.
TTPC-8
Stancor Products
Stancor Products' TTPC-8 is a Telecom Transformer with primary and secondary impedance of 600Ω CT. With dimensions of L19.84xB16.51xH18.8 (mm), it operates b/w 0.3-3.5 KHz frequencies, suitable for through-hole mounting in telecom applications at temperatures up to 105°C.
TTC-02
Tamura's TTC-02 is a Telecom Transformer with approvals from CSA and UL. With impedance of 600Ω, it operates b/w 0.3 KHz to 3.5 KHz frequencies. Ideal for telecom applications due to its through-hole mounting feature and compact dimensions of 12.4mm x 16.5mm x 20.3mm.
TTC-5023
TTC-5023 by Tamura is a UL approved telecom transformer with 600Ω impedance, 2 dB insertion loss, and 3800000μH inductance. Ideal for signal applications, this surface mount transformer has dimensions of L12.5xB9.6xH7.59mm and operates b/w 0.2 KHz to 4 KHz frequencies.
SM-LP-5001E
Bourns
The Bourns SM-LP-5001E is a telecom transformer with 600Ω impedance, 2dB insertion loss, and UL approval. Ideal for matching applications, it operates b/w -20°C to 85°C with a frequency range of 0.2kHz to 4kHz. This surface mount transformer has dimensions of L12.5xB9.6xH7.36mm and features a turns ratio of 1:1.
750510578
Wuerth Elektronik & Kg
The Wurth Elektronik 750510578 Telecom Transformer is CSA, EN, IEC, and UL approved with a max operating temperature of 85°C. With a nominal input voltage of 250V and min operating frequency of 5 KHz, it is ideal for telecom applications. This surface mount transformer has dimensions of 17.75mm x 13.46mm x 12.7mm and can operate at frequencies up to 400 KHz.
B1060
Weitron Technology
TELECOM TRANSFORMER; Manufacturer Series: B1060;
AS8456-A
Coilcraft
Coilcraft's AS8456-A is a UL-approved telecom transformer with dimensions of 17.91mm x 13.46mm x 12.7mm, operating b/w -40°C to 85°C. This surface mount transformer is ideal for telecom applications due to its compact size and temperature range suitability.
MET-32
The Tamura MET-32 is a telecom transformer with max freq of 100 KHz, impedance of 600Ω, and through-hole mounting. It operates b/w -20°C to 85°C making it suitable for telecom applications requiring high-frequency signal transmission in compact spaces. With dimensions of 11.8mm x 7.87mm x 10.4mm, it's ideal for space-constrained designs in telecommunications equipment.
PE-65870NL
Pulse Electronics
PE-65870NL by Pulse Electronics is a UL approved telecom transformer with dimensions L12.83xB7.11xH6.22 mm. It operates b/w 0-70°C, has matte tin terminal finish, and is surface mountable. Ideal for telecom applications requiring compact and efficient transformers in electronic devices.
SM-LP-5001
Bourns SM-LP-5001 is a Telecom Transformer with 600Ω Impedance, 2 dB Insertion Loss, and 3800000μH Inductance. Ideal for SIGNAL applications, it operates b/w -20°C to 85°C with a frequency range of 0.2 kHz to 4 kHz.
LM-LP-1005L
Bourns LM-LP-1005L is a UL approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting in applications requiring frequencies from 0.2kHz to 3.5kHz.
C2202
TE Connectivity
TE Connectivity's C2202 is a telecom transformer with dimensions of L13.97xB13.97xH12.7 (mm). It has approvals from BABT, CSA, IEC, and UL. This THROUGH HOLE MOUNTED transformer is ideal for telecom applications due to its compact size and industry-standard certifications.
T-1281
Rhombus Industries
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: T-1281; Additional Features: DATA COUPLING;
PE-65612NL
PE-65612NL by Pulse Electronics is a 1:1 turns ratio telecom transformer with 2000V isolation voltage. It features 25ns max pulse rise time and 2500uH inductance, suitable for signal applications. With dimensions of L12.70xB8.89xH6.35 (mm), it operates b/w -40 to +85 °C temperature range.
8001
Api Technologies
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 12.827 mm;
50503
50503 by Wurth Elektronik is a Telecom Transformer with primary impedance of 135Ω and secondary impedance of 40.2Ω. It has dimensions of L13.97xB13.97xH12.7 mm, suitable for through hole mounting applications in telecom equipment. Approved by IEC and UL, it operates b/w -40°C to 85°C, making it ideal for various telecommunications devices.
TTC-5027
TTC-5027 by Tamura is a Telecom Transformer with Impedance of 30kΩ on both Primary and Secondary. It operates b/w -20°C to 85°C, suitable for telecom applications. This surface mount transformer measures 12.5mm x 9.6mm x 7.6mm, approved by EN and UL standards.
TTPC-2
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
MET-42
Tamura MET-42 is a Telecom Transformer with impedance of 150Ω, operating freq. range from 0.3KHz to 100KHz. With dimensions 11.8mm x 7.87mm x 10.4mm, it's ideal for telecom applications requiring through-hole mounting in temp range -20°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved