Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 600 OHMS; Length: 20.7 mm; Minimum Operating Frequency: .3 KHz;
Median Price
$5.894
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.150
100+ parts
$4.380
1k+ parts
$4.050
10k+ parts
-
Verical
$5.292
Master Electronics
$5.530
$4.860
$4.830
IBS Electronics
$5.434
$4.992
$4.303
Telecom Transformers TTC-108N attributes and parameters. Explore more Telecom Transformers devices from Tamura
Approvals (V):
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Impedance (Primary):
Transformer Type:
Width:
TTC-108N Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Infineon Technologies
Silicon Transistor
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM-NP-1001-B1L
Bourns
LM-NP-1001-B1L by Bourns is a UL approved telecom transformer with 600Ω impedance, 1.5 dB insertion loss, and 2800000μH inductance. Ideal for SIGNAL applications, it operates b/w -10°C to 60°C with dimensions of L17.7xB17.7xH12.6 mm for through-hole mounting.
TTPC-8
Stancor Products
Stancor Products' TTPC-8 is a Telecom Transformer with primary and secondary impedance of 600Ω CT. With dimensions of L19.84xB16.51xH18.8 (mm), it operates b/w 0.3-3.5 KHz frequencies, suitable for through-hole mounting in telecom applications at temperatures up to 105°C.
T-1281
Rhombus Industries
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: T-1281; Additional Features: DATA COUPLING;
T3001NLT
Pulse Electronics
T3001NLT by Pulse Electronics is a UL approved telecom transformer with an isolation voltage of 1500V. It operates b/w -40°C to 85°C, has dimensions of L7.62xB7.0xH6.35 (mm), and a turns ratio of 1:1. Ideal for signal applications, it supports frequencies from 200kHz to 340MHz and features surface mounting method in tape & reel packaging.
8101
Api Technologies
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Length: 12.7 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width: 8.89 mm;
750510578
Wuerth Elektronik & Kg
The Wurth Elektronik 750510578 Telecom Transformer is CSA, EN, IEC, and UL approved with a max operating temperature of 85°C. With a nominal input voltage of 250V and min operating frequency of 5 KHz, it is ideal for telecom applications. This surface mount transformer has dimensions of 17.75mm x 13.46mm x 12.7mm and can operate at frequencies up to 400 KHz.
P1200
Etal Group Ab
P1200 by Etal Group Ab is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates b/w 0-70°C, with a max frequency of 10 KHz. Ideal for telecom applications due to its through-hole mounting feature and CSA/IEC/UL approvals.
MET-32
Tamura
The Tamura MET-32 is a telecom transformer with max freq of 100 KHz, impedance of 600Ω, and through-hole mounting. It operates b/w -20°C to 85°C making it suitable for telecom applications requiring high-frequency signal transmission in compact spaces. With dimensions of 11.8mm x 7.87mm x 10.4mm, it's ideal for space-constrained designs in telecommunications equipment.
TTPC-2
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
TTC-5023
TTC-5023 by Tamura is a UL approved telecom transformer with 600Ω impedance, 2 dB insertion loss, and 3800000μH inductance. Ideal for signal applications, this surface mount transformer has dimensions of L12.5xB9.6xH7.59mm and operates b/w 0.2 KHz to 4 KHz frequencies.
P2781
P2781 by Etal Group Ab is a Telecom Transformer with dimensions L13.0XB9.0XH7.0 (mm) and approvals from IEC and UL. It operates b/w -25 to 85 °C, with max freq of 4 KHz and min freq of 0.2 KHz. Ideal for telecom applications due to its surface mount feature and max DC unbalance current of 0.1 mA.
C2202
TE Connectivity's C2202 is a telecom transformer with dimensions of L13.97xB13.97xH12.7 (mm). It has approvals from BABT, CSA, IEC, and UL. This THROUGH HOLE MOUNTED transformer is ideal for telecom applications due to its compact size and industry-standard certifications.
TG07-0356NSRL
Halo Electronics
The Halo Electronics TG07-0356NSRL is a Telecom Transformer with approvals from EN and UL. It operates b/w -40°C to 85°C, making it suitable for various telecom applications. This surface mount transformer has dimensions of 5.08mm x 7.112mm x 8.128mm, ideal for compact designs.
TTC-105-1
TTC-105-1 by Tamura is a Telecom Transformer with 600Ω primary impedance, operating frequency range of 0.66 KHz to 3.5 KHz. It is approved by CSA and UL for applications in telecom equipment due to its compact size (20.7mm x 16mm x 19mm) and through-hole mounting feature.
TTC-5036
TTC-5036 by Tamura is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 287Ω. It operates b/w -20°C to 85°C, suitable for telecom applications. With dimensions of 12.5mm x 9.6mm x 7.6mm, it's a surface mount transformer ideal for frequencies ranging from 0.2kHz to 4kHz.
LM-LP-1004L
LM-LP-1004L by Bourns is a UL-approved telecom transformer with primary and secondary impedance of 600Ω. It operates b/w -10°C to 60°C, suitable for through-hole mounting applications in telecom systems with frequencies ranging from 0.2kHz to 3.5kHz.
AS8456-A
Coilcraft
Coilcraft's AS8456-A is a UL-approved telecom transformer with dimensions of 17.91mm x 13.46mm x 12.7mm, operating b/w -40°C to 85°C. This surface mount transformer is ideal for telecom applications due to its compact size and temperature range suitability.
TTC-02
Tamura's TTC-02 is a Telecom Transformer with approvals from CSA and UL. With impedance of 600Ω, it operates b/w 0.3 KHz to 3.5 KHz frequencies. Ideal for telecom applications due to its through-hole mounting feature and compact dimensions of 12.4mm x 16.5mm x 20.3mm.
B1056
B1056 by Pulse Electronics is a Telecom Transformer with dimensions 17.65mm x 13.46mm x 12.32mm, suitable for surface mount applications. It has a max DC unbalance current of 100mA and operates b/w -40°C to 85°C, making it ideal for telecom systems requiring compact and efficient transformers.
PE-65389NL
PE-65389NL by Pulse Electronics is a UL approved telecom transformer with 1500uH inductance and 1500V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm, suitable for signal applications with operating temperatures from 0 to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved