Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Tamura's TTC-02 is a Telecom Transformer with approvals from CSA and UL. With impedance of 600Ω, it operates b/w 0.3 KHz to 3.5 KHz frequencies. Ideal for telecom applications due to its through-hole mounting feature and compact dimensions of 12.4mm x 16.5mm x 20.3mm.
Median Price
$5.953
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.930
100+ parts
$5.160
1k+ parts
$4.770
10k+ parts
$4.270
Master Electronics
-
$5.060
$4.410
Verical
$5.835
Nova Conductors
$3.997
Vyrian
IBS Electronics
$7.097
$6.185
Bristol Electronics
Aztec Data Supply Inc.
$2.891
Continental Prestige Electronics
$3.917
Argo Parts USA
Netroflash
AZTECH Wire
$18.396
Perfect Parts
Kepictronics
Having CSA and UL approvals ensures that this telecom transformer meets safety and quality standards, giving users confidence in its reliability.
The compact height of 12.4 mm makes this telecom transformer suitable for space-constrained applications, allowing for flexibility in installation.
With a width of 16.5 mm, this telecom transformer can fit into narrow spaces without compromising on performance, making it a versatile choice for various setups.
The low minimum operating frequency of 0.3 KHz ensures that this telecom transformer can handle a wide range of frequencies, making it suitable for diverse telecom applications.
Being specifically designed as a telecom transformer means that this product is tailored to meet the specific requirements and demands of telecom systems, ensuring optimal performance.
The through hole mounting feature simplifies the installation process of this telecom transformer, making it easy to securely mount in various equipment configurations.
With a length of 20.3 mm, this telecom transformer strikes a balance between compact size and performance, offering a practical solution for telecommunications applications.
The high maximum operating frequency of 3.5 KHz indicates that this telecom transformer can handle high-frequency signals with efficiency, ensuring reliable signal transmission in telecommunications systems.
The 600 OHMS impedance on the primary side of this telecom transformer is well-suited for telecom applications, providing the appropriate level of impedance matching for optimized signal transfer.
Telecom Transformers TTC-02 attributes and parameters. Explore more Telecom Transformers devices from Tamura
Approvals (V):
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Impedance (Primary):
Transformer Type:
Width:
TTC-02 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Multiple Devices Location 10/Sep/2020
Tamura Corporation was founded in 1924 as Tamura Radio Store and is one of Japan’s oldest electronics companies. Beginning with the introduction in 1935 of an in-house developed high-quality radio receiver transformer, Tamura has developed a stream of products, including a wide variety of transformer-related products, electronic chemicals, reflow soldering systems, LED lights, broadcast audio mixing consoles, and wireless microphones.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
International Semiconductor
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Taiwan Semiconductor
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Formosa Microsemi
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Rectron
Hy Electronic
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
8517
Api Technologies
8517 by Api Technologies is a Telecom Transformer with max operating temp of 85°C and min of -40°C. It features dimensions of 8.64mm x 11.58mm x 17.15mm, suitable for surface mount applications in telecom equipment.
TTC-5027
Tamura
TTC-5027 by Tamura is a Telecom Transformer with Impedance of 30kΩ on both Primary and Secondary. It operates b/w -20°C to 85°C, suitable for telecom applications. This surface mount transformer measures 12.5mm x 9.6mm x 7.6mm, approved by EN and UL standards.
C2202
TE Connectivity
TE Connectivity's C2202 is a telecom transformer with dimensions of L13.97xB13.97xH12.7 (mm). It has approvals from BABT, CSA, IEC, and UL. This THROUGH HOLE MOUNTED transformer is ideal for telecom applications due to its compact size and industry-standard certifications.
MET-42
Tamura MET-42 is a Telecom Transformer with impedance of 150Ω, operating freq. range from 0.3KHz to 100KHz. With dimensions 11.8mm x 7.87mm x 10.4mm, it's ideal for telecom applications requiring through-hole mounting in temp range -20°C to 85°C.
MET-31
MET-31 by Tamura is a Telecom Transformer with Impedance 600Ω CT, suitable for frequencies from 0.3 KHz to 100 KHz. With a compact size of 10.4mm x 7.87mm x 11.8mm, it operates b/w -20°C to 85°C making it ideal for telecom applications requiring reliable signal transmission. The transformer features Through Hole Mounting and Tin (Sn) terminal finish for secure installation in various electronic devices.
TTPC-13
Stancor Products
Stancor Products' TTPC-13 is a Telecom Transformer with 600 OHMS CT SPLIT impedance, suitable for applications requiring 90 mA DC unbalance current. With a max operating temperature of 105°C, this transformer is designed for through-hole mounting in telecom systems operating b/w 0.3 KHz to 3.5 KHz frequencies.
8010
8010 by Api Technologies is a Telecom Transformer designed for surface mount applications. With dimensions of 12.827mm x 7.112mm x 6.502mm, it operates b/w -40°C to 85°C temperatures efficiently in TAPE & REEL packing method. Ideal for telecom equipment due to its compact size and temperature range suitability.
TTC-5035
The Tamura TTC-5035 is a Telecom Transformer with primary impedance of 600Ω and secondary impedance of 346Ω. It operates b/w -20°C to 85°C, suitable for telecom applications. This surface mount transformer has dimensions of 12.5mm x 9.6mm x 7.6mm and supports frequencies from 0.2kHz to 4kHz, approved by EN and UL standards.
T6003NLT
Pulse Electronics
T6003NLT by Pulse Electronics is a Telecom Transformer with primary and secondary impedance of 600Ω. It features surface mounting, dimensions of L13.46xB17.65xH12.32 mm, and comes in tray packing method. Ideal for telecom applications requiring precise impedance matching in compact spaces.
MET-46
Tamura's MET-46 is a telecom transformer with dimensions of L10.4xB7.87xH11.8 (mm). It has a max DC unbalance current of 3 mA and primary impedance of 600Ω. Ideal for through-hole mounting applications in telecommunications due to its compact size and impedance specifications.
PE-65870NL
PE-65870NL by Pulse Electronics is a UL approved telecom transformer with dimensions L12.83xB7.11xH6.22 mm. It operates b/w 0-70°C, has matte tin terminal finish, and is surface mountable. Ideal for telecom applications requiring compact and efficient transformers in electronic devices.
PE-65389NL
PE-65389NL by Pulse Electronics is a UL approved telecom transformer with 1500uH inductance and 1500V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm, suitable for signal applications with operating temperatures from 0 to 70°C.
8001
TELECOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Length: 12.827 mm;
TTC-5020
TTC-5020 by Tamura is a Telecom Transformer with approvals from CSA and UL. It has a height of 13.8mm, width of 22.5mm, and impedance of 600Ω on the primary side. This transformer type is suitable for applications requiring frequencies ranging from 0.6 KHz to 3.5 KHz, featuring through-hole mounting for easy installation in various telecom devices.
TTPC-2
TTPC-2 by Stancor Products is a Telecom Transformer with primary and secondary impedance of 600Ω. It operates at frequencies from 0.3 KHz to 3.5 KHz, with a max DC unbalance current of 0 mA. Ideal for telecommunications applications due to its compact size and through-hole mounting feature.
T3001NLT
T3001NLT by Pulse Electronics is a UL approved telecom transformer with an isolation voltage of 1500V. It operates b/w -40°C to 85°C, has dimensions of L7.62xB7.0xH6.35 (mm), and a turns ratio of 1:1. Ideal for signal applications, it supports frequencies from 200kHz to 340MHz and features surface mounting method in tape & reel packaging.
PE-65612NL
PE-65612NL by Pulse Electronics is a 1:1 turns ratio telecom transformer with 2000V isolation voltage. It features 25ns max pulse rise time and 2500uH inductance, suitable for signal applications. With dimensions of L12.70xB8.89xH6.35 (mm), it operates b/w -40 to +85 °C temperature range.
T-1281
Rhombus Industries
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: T-1281; Additional Features: DATA COUPLING;
SM-LP-5001E
Bourns
The Bourns SM-LP-5001E is a telecom transformer with 600Ω impedance, 2dB insertion loss, and UL approval. Ideal for matching applications, it operates b/w -20°C to 85°C with a frequency range of 0.2kHz to 4kHz. This surface mount transformer has dimensions of L12.5xB9.6xH7.36mm and features a turns ratio of 1:1.
X8390-A
Coilcraft
Coilcraft X8390-A is a UL approved telecom transformer with dimensions L17.75xB13.46xH12.7 (mm). It operates b/w -40°C to 85°C, suitable for surface mount applications in telecommunications equipment. Packaged in tape & reel, it offers reliable performance and compact design for various telecom devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TTC-03
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; Impedance (Primary): 600 OHMS; Minimum Operating Frequency: .3 KHz; Length: 20.3 mm;
TTC-04
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 600 OHMS; Length: 20.3 mm; Height: 12.4 mm;
TTC-05
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 4000 OHMS; Maximum Operating Frequency: 3.5 KHz; Additional Features: TURNS RATIO: 1:0.409;
TTC-09
TELECOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA, UL; Impedance (Primary): 600 OHMS CT; Length: 19.8 mm; Height: 18.7 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved