Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's FBMJ2125HS250NT is an 0805 chip bead filter with 2 terminals. With a max operating temperature of 85°C, it offers a DC resistance of 0.004 ohm and output impedance of 25 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and can handle up to 6A rated current.
Median Price
$0.038
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.140
100+ parts
$0.067
1k+ parts
$0.045
10k+ parts
-
Mouser Electronics
$0.033
Master Electronics
$0.029
Verical
$0.035
TTI
$0.030
Chip1Stop
$0.040
Nova Conductors
Component Electronics Inc.
$0.540
$0.400
$0.350
IBS Electronics
Vyrian
NAC Semi
$0.032
Electro Sonic
$0.034
Chip Stock
Sensible Micro Corp
Legend Electronics Inc.
Cyclops Electronics Ltd
Prism Electronics
Bristol Electronics
Sunrise Surplus Inc.
Ampacity Inc.
$0.021
Semicontronic
$0.020
Argo Parts USA
Netroflash
$0.028
Continental Prestige Electronics
Advanced Electronics
$1.168
$1.156
$1.110
Corohmni
$1.939
Aztec Data Supply Inc.
$2.909
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Chip bead construction ensures efficient filtering and suppression of electromagnetic interference in data lines.
Having 2 terminals allows for easy and secure connection to the data line.
Standard case code for easy compatibility and installation in existing systems.
Ferrite chip filters are known for their high efficiency in reducing noise and interference in data lines.
With a high operating temperature, this filter can perform reliably in various environmental conditions.
Can operate in extreme cold temperatures without any performance issues.
Compact width allows for easy integration into tight spaces.
Effective filtering of noise at frequencies as low as 100 MHz.
Low DC resistance ensures minimal impact on signal integrity.
Compact length makes it suitable for small electronic devices and PCB designs.
Filters out noise effectively up to 100 MHz frequency.
Matches the impedance of typical data lines for optimal signal transmission.
Convenient packaging for automated assembly processes.
Easy surface mounting on PCBs for streamlined production.
Standard dimensions for compatibility with various electronic devices.
Can handle high currents in data lines without overheating or performance degradation.
Low profile design for space-constrained applications.
Ferrite material provides excellent noise suppression capabilities in data lines.
Data Line Filters FBMJ2125HS250NT attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Width (mm):
FBMJ2125HS250NT Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Part Number - Mult Devs Part Number 23/Sep/2022
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Sensitron Semiconductor
Rugao Dachang Electronic
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
PCMF2HDMI2SZ
Nexperia
Nexperia's PCMF2HDMI2SZ is a 5V data line filter with 2 functions and 10 terminals. It operates b/w -40°C to 85°C, with dimensions of L1.62xB1.22xH0.6 mm. Ideal for applications requiring IEC approvals, such as HDMI signal filtering in compact electronic devices.
7427927112
Wuerth Elektronik & Kg
Wurth Elektronik 7427927112 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.35A. It operates b/w -55 to 125°C, has a DC resistance of 0.35 ohm, and an output impedance of 120Ω. Ideal for surface mount applications in electronics to reduce electromagnetic interference.
BLM15AG601SN1D
Murata Manufacturing
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
FBMH1608HM101-T
Taiyo Yuden
Taiyo Yuden's FBMH1608HM101-T is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 85°C and DC resistance of 0.035 ohm, it offers effective filtering up to 100 MHz. This surface mount filter measures L1.6xB0.8xH0.8 mm and is suitable for high-speed data transmission systems.
FLT007A0Z
Abb
Abb FLT007A0Z is a 2-function data line filter with UL, CSA, VDE, EN approvals. Rated for 75V and 7A, it operates b/w -40 to 85°C. Ideal for applications requiring through-hole mounting and filtering of data lines.
BLM15BD121SN1D
Murata Manufacturing's BLM15BD121SN1D is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.3 ohm, and an output impedance of 120 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression on data lines.
P0354NLT
Pulse Electronics
Pulse Electronics P0354NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 1170 uH. It operates b/w -40 to 120 °C and has a max DC resistance of 0.2 ohm. Ideal for surface mount applications, it offers a rated current of 1.22 A in compact dimensions of L12.7xB12.7xH5.46 mm, making it suitable for various electronic devices requiring noise filtering on data lines.
BLM18PG121SN1B
Murata Manufacturing's BLM18PG121SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.05 ohm, output impedance of 120 OHM, and rated current of 2 A. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
ILHB1206ER601V
Vishay Intertechnology's ILHB1206ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
MMZ2012R601AT
TDK
MMZ2012R601AT by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a DC resistance of 0.2 ohm, output impedance of 600 OHM, and rated current of 0.5 A. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
LI0805H121R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
HZ0603B112R-10
FERRITE CHIP; Maximum DC Resistance: .8 ohm; Rated Current: .2 A; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; No. of Terminals: 2;
742700713
Wurth Elektronik 742700713 is a FERRITE BEAD Data Line Filter with 58 OHM output impedance. Operating temperature ranges from -25 to 125 °C, suitable for STUD MOUNT applications. Compact at D3.5xH5.0 mm, it's ideal for noise suppression in electronic circuits.
74279226101
Wurth Elektronik 74279226101 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH2.3 (mm). With a max frequency of 1100 MHz and output impedance of 100 OHM, it's ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
BLM21PG121SN1D
Murata Manufacturing's BLM21PG121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.03 ohm and output impedance of 120 OHM, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
PA4339.102NLT
PA4339.102NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 8uH and operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with a max current rating of 3A.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
742792640
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FBMJ2125HM330-T
Taiyo Yuden's FBMJ2125HM330-T is an 0805 chip bead filter with 2 terminals. It operates b/w -40 to 85°C, offering a DC resistance of 0.008 ohm and output impedance of 33Ω at a frequency range of 100 MHz. Ideal for data line filtering applications, it has dimensions of L2.0xB1.25xH0.85 mm and can handle a rated current of 4A in surface mount installations.
FBMJ4516HS111-T
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
FBMJ2125HS420-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .008 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMJ3216HS800-T
Taiyo Yuden's FBMJ3216HS800-T is a 1206 chip bead filter with 2 terminals. It operates b/w -40°C to 85°C, offering an output impedance of 80 ohm at 100 MHz frequency. Ideal for data line filtering applications due to its compact dimensions and high rated current of 4A.
FBMJ3216HS800-TV
FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.
FBMJ3216HS800-T8
Taiyo Yuden's FBMJ3216HS800-T8 is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 80 ohms, operates b/w -40°C to 125°C, and has a compact size of 3.2mm x 1.6mm x 1.1mm. Ideal for surface mount applications requiring effective noise suppression in data lines.
FBMJ3216HM600-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMJ3216HS480NT
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
FBMJ2125HS420-T8
FERRITE CHIP; Maximum DC Resistance: .008 ohm; Rated Current: 4 A; No. of Terminals: 2; Packing Method: TR,PAPER; Maximum Operating Temperature: 125 Cel;
FBMJ1608HS220NTR
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
FBMJ2125HS420-TV
FBMJ2125HS420-TV by Taiyo Yuden is a ferrite chip data line filter with dimensions of L2.0XB1.25XH0.85 (mm). It has a max operating temperature of 125 °C and a min operating temperature of -40 °C. This filter is suitable for surface mount applications and has a rated current of 4 A.
FBMJ4516HS720NT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .007 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
FBMJ1608HS280NTR
Taiyo Yuden's FBMJ1608HS280NTR is a chip bead data line filter with dimensions of 1.6x0.8x0.8mm, suitable for surface mount applications. It offers a max operating temperature of 125°C, min frequency of 100MHz, and rated current of 6A, making it ideal for noise suppression in electronic circuits.
FBMJ1608HS280NT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .007 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMJ4516HM900-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .014 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
FBMJ3216HS480NTV
FERRITE CHIP; Maximum DC Resistance: .005 ohm; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Length: 3.2 mm;
FBMJ1608HS280NTV
FERRITE CHIP; Maximum DC Resistance: .007 ohm; Rated Current: 4 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Length: 1.6 mm;
FBMJ1608HS280NTW
FERRITE CHIP; Maximum DC Resistance: .006 ohm; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Width (mm): 0.8; No. of Terminals: 2;
FBMJ3216HM600-TV
FERRITE CHIP; Maximum DC Resistance: .01 ohm; Rated Current: 4 A; Mounting Type: SURFACE MOUNT; Packing Method: TR, EMBOSSED; Additional Features: AEC-Q200;
FBMJ2125HS250N
FERRITE CHIP; Maximum DC Resistance: .004 ohm; Material: Ferrite; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved