Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STD3NK60ZD by STMicroelectronics is a N-CHANNEL Power FET with 600V DS Breakdown Voltage and 9.6A Pulsed Drain Current, ideal for SWITCHING applications. It features a SINGLE configuration with BUILT-IN DIODE, operating in ENHANCEMENT MODE at up to 150 °C, making it suitable for high-power tasks.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
IDEA Electronic Components Group
$1.320
$1.188
MKK Technologies
$2.483
DigiPath Technology Company
AZTECH Wire
$11.040
Corphita
Alle Elektronik GmbH
A-Z Elektronik GmbH
Parana Technologies
$1.578
Perfect Parts
Plastic/Epoxy material provides durability and protection for the internal components of the FET.
N-Channel FETs are commonly used in power applications due to their lower conduction losses.
Built-in diode simplifies circuit design and can protect against reverse voltage spikes.
Designed specifically for switching applications, ensuring efficient and reliable performance.
Surface mount capability allows for easy and convenient integration onto PCBs.
High breakdown voltage ensures reliable operation in high voltage applications.
High power dissipation rating allows for handling of large power loads without overheating.
Wide operating temperature range makes it suitable for various environments and applications.
Power Field Effect Transistors (FET) STD3NK60ZD attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
STD3NK60ZD Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Eic Semiconductor
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
1554216004
Molex
WIRE AND CABLE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
IRF640
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Avalanche Energy Rating (EAS): 580 mJ; Terminal Position: SINGLE;
IRF540NPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 130 W; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING;
JANTX2N6796U
JANTX2N6796U by Infineon Technologies is a power FET with N-channel configuration and built-in diode. It is used for switching applications, has a min DS breakdown voltage of 100V, and can handle a max pulsed drain current of 32A.
IRF640PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FQB34P10TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 155 W; Maximum Pulsed Drain Current (IDM): 134 A; Maximum Drain-Source On Resistance: .06 ohm;
BSC028N06NSATMA1
Infineon BSC028N06NSATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.0028 ohm RDS(on), and 23A ID. Ideal for SWITCHING applications due to its 400A IDM and 100mJ EAS ratings. Suitable for ENHANCEMENT MODE operation in various electronic devices.
SI7850DP-T1-E3
Vishay Intertechnology
SI7850DP-T1-E3 by Vishay Intertechnology is an N-channel power field effect transistor (FET) with a min DS breakdown voltage of 60V. It is designed for switching applications and has a max pulsed drain current of 40A. This surface mount transistor operates in enhancement mode and has a max operating temperature of 150°C.
DN3535N8-G
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; No. of Elements: 1; Package Style (Meter): SMALL OUTLINE;
IRFP460BPBF
Vishay Intertechnology's IRFP460BPBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 62A IDM and 0.25 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with an EAS of 281mJ, making it suitable for high-power tasks.
FQB22P10TM
FQB22P10TM by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage, 88A IDM, and 0.125 ohm RDS. Ideal for SWITCHING applications, it features a built-in DIODE in a RECTANGULAR package with GULL WING terminals. Operating in ENHANCEMENT MODE, it has an EAS of 710 mJ and can handle up to 125W power dissipation at 175°C.
IPB120P04P4L03ATMA2
IPB120P04P4L03ATMA2 by Infineon is a P-CHANNEL FET with 40V DS Breakdown Voltage, 480A IDM, and 0.0049 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
IRF3205PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Case Connection: DRAIN; No. of Elements: 1;
FQD1N80TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 1 A;
SI4532DY
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Maximum Pulsed Drain Current (IDM): 20 A; Package Body Material: PLASTIC/EPOXY;
IRF540ZLPBF
IRF540ZLPBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 140A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 92W and 0.0265 ohm Drain-Source On Resistance. Operating at up to 175°C, it features a METAL-OXIDE SEMICONDUCTOR technology in an IN-LINE package style.
CSD18532Q5B
CSD18532Q5B by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 400A IDM, and 0.0043 ohm Drain-Source Resistance. Suitable for high-power switching circuits with operating temperatures from -55 to 150 °C.
SIR873DP-T1-GE3
Vishay Intertechnology's SIR873DP-T1-GE3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 50A and EAS of 80mJ, this MOSFET has 0.0475 ohm Drain-Source On Resistance. Its small outline package and matte tin finish make it suitable for various electronic designs.
IRF7240TRPBF
IRF7240TRPBF by Infineon is a P-CHANNEL FET for switching applications. It features a 40V DS breakdown voltage, 10.5A max drain current, and 0.015 ohm max on resistance. With a small outline package style and operating temperature range of -55 to 150 °C, it's ideal for power management in various electronic devices.
IRF7404TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Feedback Capacitance (Crss): 340 pF; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STD35P6LLF6
STMicroelectronics
STD35P6LLF6 by STMicroelectronics is a P-CHANNEL FET with 60V DS breakdown voltage, 140A IDM, and 0.036 ohm RDS(on). It is used for switching applications in enhancement mode with a max power dissipation of 70W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STD30NF06LT4
STD30NF06LT4 by STMicroelectronics is an N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 140A and 0.03 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. This power transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount assembly.
STD3NK100Z
STD3NK100Z by STMicroelectronics is a N-CHANNEL Power FET with 1000V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 10A and EAS of 110mJ, operating in ENHANCEMENT MODE. With a max power dissipation of 90W and small outline package style, it offers efficient performance at up to 150°C.
STD3NK80ZT4
STD3NK80ZT4 by STMicroelectronics is a N-CHANNEL Power FET with 800V DS Breakdown Voltage. It has a Max IDM of 10A and EAS of 170mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it features a max power dissipation of 70W and can handle up to 2.5A Drain Current.
STD3NK90ZT4
STD3NK90ZT4 by STMicroelectronics is an N-CHANNEL FET with 900V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 12A and EAS of 180mJ, suitable for ENHANCEMENT MODE operation. With a compact RECTANGULAR package style and GULL WING terminals, it offers efficient power dissipation up to 90W at a max temp of 150°C.
STD35NF06LT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 80 W; Maximum Operating Temperature: 175 Cel; Package Shape: RECTANGULAR;
STD3N80K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
STD3LN80K5
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
STD3N95K5AG
Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STD36P4LLF6
STD36P4LLF6 by STMicroelectronics is a P-CHANNEL FET with 36A max drain current and 60W max power dissipation. Ideal for high-power applications, it operates at up to 175°C, making it suitable for various industrial and automotive uses.
STD3NM60N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 1.8 ohm; Case Connection: DRAIN; Package Body Material: PLASTIC/EPOXY;
STD3PK50Z
STD3PK50Z by STMicroelectronics is a P-CHANNEL FET for switching applications. It features a 500V DS breakdown voltage, 11.2A max pulsed drain current, and 4 ohm max drain-source resistance. With a small outline package style and operating temperature range of -55 to 150°C, it's ideal for power management in various electronic devices.
STD3NK60ZT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Transistor Application: SWITCHING; Terminal Position: SINGLE;
STD30NF06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Moisture Sensitivity Level (MSL): 1; JEDEC-95 Code: TO-252AA;
STD30NF03L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Avalanche Energy Rating (EAS): 100 mJ; No. of Terminals: 2;
STD30NF06L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; No. of Terminals: 3; Maximum Drain Current (Abs) (ID): 35 A;
STD30NE06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; Package Shape: RECTANGULAR; No. of Elements: 1;
STD30NF03L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; No. of Elements: 1; Transistor Element Material: SILICON;
STD30NF06LAG
STD30NF06T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Terminal Position: SINGLE; Peak Reflow Temperature (C): 260;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved