Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STD30NF06LT4 by STMicroelectronics is an N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 140A and 0.03 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. This power transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount assembly.
Median Price
$1.430
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.780
100+ parts
$0.792
1k+ parts
$0.575
10k+ parts
$0.467
Distrelec
$1.906
-
Newark
$1.980
$0.995
$0.776
Mouser Electronics
$2.000
$0.858
$0.622
$0.555
DigiKey
Farnell
$0.666
$0.458
Element14
$1.080
$0.897
EBV Elektronik
Arrow
$0.508
Verical
$0.804
RS (Exports)
$0.757
Digiode
$0.655
Nova Conductors
$0.938
TME
$1.880
$0.930
Ozdisan Elektronik
$50.969
IBS Electronics
$0.736
Vyrian
Chip Stock
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Anansix
Sensible Micro Corp
Bristol Electronics
A&K Electronics
Rotakorn
Micros
$1.033
$0.946
Partservice
$1.002
$0.917
Micros sp.j. W. Kędra i J. Lic
$1.073
$0.982
PC Components Company LLC
ABC Electronics Ltd.
Sea View Technologies
Aztec Data Supply Inc.
$0.380
Semicontronic
$0.387
$0.377
$0.375
Ampacity Inc.
Corphita
$0.620
IDEA Electronic Components Group
$0.706
$0.635
Argo Parts USA
Advanced Electronics
$0.968
$0.881
$0.794
Corohmni
$1.066
MKK Technologies
$1.327
DigiPath Technology Company
Microchip USA
$4.646
$4.618
Metaverse IC Inc.
RC Electronics
Continental Prestige Electronics
$0.884
$0.605
Eastek
$0.970
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Epart123
$0.630
QUARKTWIN TECHNOLOGY LTD
iodParts Technologies Inc.
Lixinc
Allen Electronics Distributors
$8.111
Futuretech Components
Alle Elektronik GmbH
Parana Technologies
$0.844
A-Z Elektronik GmbH
Robosynatics
Lucentia Tech
Infinite Electronics LLP (Excess)
Kepictronics
Netroflash
$0.919
$0.891
$0.872
This material is durable and reliable, ensuring the product can withstand various environmental conditions.
N-channel transistors typically have higher electron mobility, making them suitable for high-speed switching applications.
The high breakdown voltage allows for reliable operation in circuits with higher voltage requirements.
The high pulsed drain current capability makes this FET suitable for applications that require high current handling during short durations.
The FET's ability to handle avalanche energy helps protect the device from damage during high voltage transients.
With a high power dissipation rating, this FET can handle higher levels of power without overheating.
The high operating temperature range allows for reliable performance in various temperature conditions.
The low on-resistance ensures minimal power loss and efficient operation in switching applications.
Power Field Effect Transistors (FET) STD30NF06LT4 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
STD30NF06LT4 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Box Label Chg 28/Jul/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Hi-tron Semiconductor
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
IRFR6215TRPBF
Infineon Technologies
Infineon's IRFR6215TRPBF is a P-CHANNEL FET with 150V DS Breakdown Voltage, 44A IDM, and 0.295 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 110W. Suitable for surface mount with GULL WING terminals, it has an operating temp range of -55 to 175 °C.
STW12NK90Z
STW12NK90Z by STMicroelectronics is a N-CHANNEL Power FET with 900V DS Breakdown Voltage and 44A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With a max power dissipation of 230W, this transistor has a 0.88 ohm RDS(on) and can handle up to 11A drain current.
IRF1010NSTRLPBF
IRF1010NSTRLPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 290A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has 0.011 ohm Drain-Source On Resistance and can handle up to 170W power dissipation.
PSMN5R5-60YS,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; No. of Elements: 1;
BSP129H6327XTSA1
Infineon's BSP129H6327XTSA1 is a N-CHANNEL FET with 240V DS Breakdown Voltage and 1.4A IDM. Ideal for DEPLETION MODE operation, it features a built-in diode and 20 ohm Drain-Source On Resistance. Widely used in automotive applications due to AEC-Q101 compliance.
IRF7303TRPBF
IRF7303TRPBF by Infineon is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It has a Max Drain Current of 4.9A, Min DS Breakdown Voltage of 30V, and Max Pulsed Drain Current of 20A. This small outline package with GULL WING terminals operates in ENHANCEMENT MODE for efficient power management.
CSD19536KTT
CSD19536KTT by Texas Instruments is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 400A and EAS of 806mJ, operating in ENHANCEMENT MODE. This PLASTIC/EPOXY transistor has a max ID of 200A and 0.0028 ohm RDS(on), suitable for high-power switching circuits.
TN2510N8-G
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; JESD-30 Code: R-PSSO-F3; Maximum Feedback Capacitance (Crss): 25 pF;
IRLML0060TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Package Body Material: PLASTIC/EPOXY;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
IPZ40N04S5L2R8ATMA1
Infineon's IPZ40N04S5L2R8ATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 160A IDM, and 0.0038 ohm RDS(ON). Ideal for automotive applications due to AEC-Q101 standard compliance.
NDT3055L
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
FDN5630-F095
Fairchild Semiconductor
FDN5630-F095 by Fairchild Semiconductor is a N-CHANNEL Power FET with 1.7A max drain current and 0.5W max power dissipation. Ideal for applications requiring high efficiency in a compact design, such as power management systems or battery-operated devices. Operating at up to 150°C, it features surface mount configuration and metal-oxide semiconductor technology for enhanced performance.
SI4532DY
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Maximum Pulsed Drain Current (IDM): 20 A; Package Body Material: PLASTIC/EPOXY;
BSC123N08NS3GATMA1
BSC123N08NS3GATMA1 by Infineon is a N-CHANNEL FET with 80V DS breakdown voltage and 220A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 66W. This MOSFET has a drain-source on resistance of 0.0123 ohm and can handle up to 150°C operating temperature.
IRFP460
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain Current (ID): 20 A; No. of Terminals: 3;
IRF7425TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SI7157DP-T1-GE3
Vishay Intertechnology's SI7157DP-T1-GE3 is a P-channel FET with 20V DS breakdown voltage, 300A IDM, and 0.0016 ohm max RDS(on). Ideal for switching applications in enhancement mode operation. Features include built-in diode, small outline package style, and matte tin terminal finish.
FDD4685-F085P
FDD4685-F085P by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has an Avalanche Energy Rating of 121mJ.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STD35P6LLF6
STD35P6LLF6 by STMicroelectronics is a P-CHANNEL FET with 60V DS breakdown voltage, 140A IDM, and 0.036 ohm RDS(on). It is used for switching applications in enhancement mode with a max power dissipation of 70W.
STD3NK100Z
STD3NK100Z by STMicroelectronics is a N-CHANNEL Power FET with 1000V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 10A and EAS of 110mJ, operating in ENHANCEMENT MODE. With a max power dissipation of 90W and small outline package style, it offers efficient performance at up to 150°C.
STD3NK80ZT4
STD3NK80ZT4 by STMicroelectronics is a N-CHANNEL Power FET with 800V DS Breakdown Voltage. It has a Max IDM of 10A and EAS of 170mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it features a max power dissipation of 70W and can handle up to 2.5A Drain Current.
STD3NK90ZT4
STD3NK90ZT4 by STMicroelectronics is an N-CHANNEL FET with 900V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 12A and EAS of 180mJ, suitable for ENHANCEMENT MODE operation. With a compact RECTANGULAR package style and GULL WING terminals, it offers efficient power dissipation up to 90W at a max temp of 150°C.
STD35NF06LT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 80 W; Maximum Operating Temperature: 175 Cel; Package Shape: RECTANGULAR;
STD3N80K5
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
STD3LN80K5
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
STD3N95K5AG
Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
STD36P4LLF6
STD36P4LLF6 by STMicroelectronics is a P-CHANNEL FET with 36A max drain current and 60W max power dissipation. Ideal for high-power applications, it operates at up to 175°C, making it suitable for various industrial and automotive uses.
STD3NM60N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 1.8 ohm; Case Connection: DRAIN; Package Body Material: PLASTIC/EPOXY;
STD3PK50Z
STD3PK50Z by STMicroelectronics is a P-CHANNEL FET for switching applications. It features a 500V DS breakdown voltage, 11.2A max pulsed drain current, and 4 ohm max drain-source resistance. With a small outline package style and operating temperature range of -55 to 150°C, it's ideal for power management in various electronic devices.
STD3NK60ZT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Transistor Application: SWITCHING; Terminal Position: SINGLE;
STD30NF06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Moisture Sensitivity Level (MSL): 1; JEDEC-95 Code: TO-252AA;
STD30NF03L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Avalanche Energy Rating (EAS): 100 mJ; No. of Terminals: 2;
STD30NF06L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; No. of Terminals: 3; Maximum Drain Current (Abs) (ID): 35 A;
STD30NE06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; Package Shape: RECTANGULAR; No. of Elements: 1;
STD30NF03L-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; No. of Elements: 1; Transistor Element Material: SILICON;
STD30NF06LAG
STD30NF06T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Terminal Position: SINGLE; Peak Reflow Temperature (C): 260;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved