Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AC;
Median Price
$0.526
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.860
100+ parts
$0.348
1k+ parts
$0.240
10k+ parts
$0.167
RS (Exports)
-
$0.191
Vyrian
Freelance Electronics
$0.243
Digiode
$0.522
Anansix
Nova Conductors
Ampacity Inc.
$0.162
Corphita
$0.495
Component Stockers USA
$0.910
$0.580
$0.400
IDEA Electronic Components Group
$2.636
$2.372
Corohmni
$4.630
MKK Technologies
$4.956
DigiPath Technology Company
Metaverse IC Inc.
Kepictronics
Perfect Parts
Authorized Procurement Solutions
A-Z Elektronik GmbH
Argo Parts USA
Continental Prestige Electronics
Parana Technologies
$3.152
Aranea Global
Silicon Surge Protectors SMP50-68 attributes and parameters. Explore more Silicon Surge Protectors devices from STMicroelectronics
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Repetitive Peak Reverse Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
SMP50-68 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Assembly/Origin - Mult Dev 06/Mar/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Allegro MicroSystems
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
TISP7350F3D
TISP7350F3D by Texas Instruments is a silicon surge protector with 4.3A peak current, 350V breakdown voltage, and thyristor trigger. It is used for surge protection in various applications due to its compact rectangular package and dual terminal position.
TBU-CA065-500-WH
Bourns
SILICON SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1;
SMTPA320
STMicroelectronics
SMTPA320 by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a non-repetitive peak on-state current of 16 A, a repetitive peak reverse voltage of 320 V, and operates b/w -55 °C to 150°C. Ideal for protecting circuits from voltage spikes, it ensures reliability in various electronic devices.
TISP3150F3D
TISP3150F3D by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 120V Max DC Off-state Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
MMT10B230T3G
The Onsemi MMT10B230T3G is a silicon surge protector with a max breakdown voltage of 265V. It features a thyristor surge protector configuration and operates b/w -40 °C to 125°C. Ideal for applications requiring protection against voltage surges in compact electronic devices.
P3403AC
Teccor Electronics
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: STAR CONNECTED, 3 ELEMENTS; Terminal Finish: Tin/Lead (Sn/Pb);
TISP3380F3DR
TISP3380F3DR by Texas Instruments is a Silicon Surge Protector with 2 series-connected elements. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 380V. Ideal for protecting electronic devices from surges, it operates b/w 0-70°C and is UL recognized.
THDT5112
THDT5112 by STMicroelectronics is a complex silicon surge protector designed for robust applications. It features a non-repetitive peak on-state current of 10 A, operates b/w -55 °C to 150°C, and has a max clamping voltage of 7 V. Ideal for protecting sensitive electronics from voltage spikes.
TISP7350F3P
TISP7350F3P by Texas Instruments is a 3-element surge protector with 5.7A peak current, 350V breakdown voltage, and thyristor trigger. Ideal for protecting electronic circuits from voltage spikes in industrial applications. Features through-hole terminals and UL recognition for reliable performance in temperatures ranging from 0 to 70°C.
NP2300SET3G
NP2300SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It operates b/w -40 °C to 150°C, has a breakdown voltage of 260V, and can hold a max current of 150mA. Ideal for protecting electronic devices from power surges in various applications.
NP0900SAMCT3G
NP0900SAMCT3G by Onsemi is a single silicon surge protector with 20A non-repetitive peak on-state current. It has a max DC off-state voltage of 75V and operates b/w -55 to 150 °C. Ideal for applications requiring thyristor surge protection in compact spaces.
TISP4150F3DR
TISP4150F3DR by Texas Instruments is a single silicon surge protector with 4A peak current, 120V DC off-state voltage, and 150V breakdown voltage. It is used for surge protection in various applications due to its UL recognized trigger device type and small outline package style suitable for surface mount configurations.
TISP4395H3BJR
TISP4395H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 395V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
MMT05B260T3
The Onsemi MMT05B260T3 is a silicon surge protector with a max DC off-state voltage of 200V and max breakdown voltage of 320V. It operates b/w -40 °C to 175°C, making it suitable for protecting electronic devices from power surges in various applications. With UL recognition, this thyristor surge protector is designed for surface mount installation in compact spaces.
TISP2320F3D
TISP2320F3D by Texas Instruments is a Silicon Surge Protector with 3 elements in delta configuration. It has a max breakdown voltage of 320V and non-repetitive peak on-state current of 4A. Ideal for protecting electronic devices from voltage surges, it is UL recognized and surface mountable.
TISP4240F3SL
TISP4240F3SL by Texas Instruments is a single silicon surge protector with 6A peak current, 180V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its UL recognized standards and through-hole terminal form.
TISP4240F3DR
TISP4240F3DR by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max breakdown voltage of 240V and operates b/w 0-70°C. Ideal for protecting electronic devices from voltage surges in various applications.
TPA130
STMicroelectronics' TPA130 is a single silicon surge protector with 16A non-repetitive peak current and 130V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with operating temperatures ranging from -55 °C to 150°C.
TBU-CA050-500-WH
SILICON SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
TISP1072F3DR
TISP1072F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current, 58V Max DC Off-state Voltage, and 72V Max Breakdown Voltage. It is used as a Thyristor Surge Protector in applications requiring protection against voltage surges.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMP50-68
Vishay Intertechnology
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
SMP50-100
SMP50-120
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 108 V;
SMP50-130
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
SMP50-180
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
SMP50-200
SMP50-220
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
SMP50-240
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
SMP50-270
SMP50-320
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Repetitive Peak Reverse Voltage: 320 V;
SMP50-62
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AC;
SMP50-120-E3
SMP50-180-E3
SMP50-200-E3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 180 V;
SMP50-240-E3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
SMP50-270-E3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
SMP50-220-E3
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved