Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
E-TDA7375AV by STMicroelectronics is a Class AB audio amplifier with 43W output power, 10% harmonic distortion, and 2 channels. It operates on a supply voltage range of 8-18V and has a nominal bandwidth of 0.022 kHz. Ideal for audio and video applications requiring high-quality sound amplification in a compact rectangular package style.
Median Price
$5.180
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Farnell
1+ parts
$5.050
100+ parts
$3.450
1k+ parts
$3.050
10k+ parts
-
DigiKey
$3.299
$2.960
$2.875
Newark
$3.310
Mouser Electronics
$5.790
$3.680
$3.350
Chip1Stop
$6.360
$3.200
$2.880
Element14
$7.680
$5.930
$5.450
Arrow
$2.592
Verical
Avnet
Vyrian
$2.434
Digiode
$3.316
TME
$4.680
Anansix
Chip Stock
Micros
$4.243
$4.207
Partservice
$4.098
$4.063
Micros sp.j. W. Kędra i J. Lic
$4.389
$4.352
Prism Electronics
Native Components
$1.870
Northwest PG Solutions
$2.057
IDEA Electronic Components Group
$2.091
$1.882
Component Stockers USA
$2.700
$25.920
Corphita
$3.142
MKK Technologies
$3.932
DigiPath Technology Company
Continental Prestige Electronics
$5.840
$3.920
Lixinc
Parana Technologies
$2.500
Perfect Parts
Authorized Procurement Solutions
Eastek
GreenTree Electronics
iodParts Technologies Inc.
This material is lightweight and durable, making the amplifier easy to handle and long-lasting.
Class AB amplifiers offer a balance between efficiency and high-quality sound reproduction, making this amplifier suitable for audio applications.
Low harmonic distortion ensures that the audio output is clean and faithful to the original sound source.
The amplifier operates within a suitable voltage range, ensuring stable performance and optimal power delivery.
Multiple terminals allow for versatile connectivity options and ease of installation for various audio setups.
With a high output power, this amplifier can drive speakers efficiently and deliver robust sound performance.
The amplifier can function even at low supply voltages, providing flexibility in power supply options.
Dual channels allow for stereo sound reproduction, creating a more immersive audio experience for listeners.
Wide bandwidth ensures that the amplifier can accurately reproduce a broad range of frequencies, capturing the full spectrum of audio signals.
The low supply current consumption of the amplifier makes it energy-efficient and suitable for portable or low-power audio applications.
Audio & Video Amplifiers E-TDA7375AV attributes and parameters. Explore more Audio & Video Amplifiers devices from STMicroelectronics
Nominal Bandwidth:
General IC Type:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
E-TDA7375AV General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - Mult Devices Testing 10/May/2018
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM358N
Harris Semiconductor
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
PTAS6422EQDKQRQ1
PTAS6422EQDKQRQ1 by Texas Instruments is a Class D audio amplifier with 45W output power, suitable for automotive applications. It operates in a temperature range of -40 to 125°C and supports a supply voltage from 4.5V to 26.4V, making it ideal for use in various audio and video amplification systems.
TS4871IST
STMicroelectronics' TS4871IST is an audio amplifier IC with 2 channels, 0dB gain, and 0.108W output power. It operates in industrial temperature range (-40 to 85°C) and requires a supply voltage of 2-5.5V. The package is small outline, thin profile, square shape for surface mount applications.
TPA751D
TPA751D by Texas Instruments is an audio amplifier with 0.5% harmonic distortion, 3.3/5 V power supplies, and 0.7 W nominal output power. It is a small outline IC suitable for industrial applications requiring high-quality audio amplification in compact spaces.
LM380N/NOPB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
SSM2167-1RM-R2
Analog Devices
Analog Devices' SSM2167-1RM-R2 is an audio preamplifier with 18dB gain, operating at a supply voltage range of 2.5V to 5.5V. This CMOS technology IC has a bandwidth of 0.02 kHz and operates in industrial temperature grades from -40°C to 85°C. It features a small outline package with dual terminals suitable for audio and video amplifier applications.
PAM8304ASR
PAM8304ASR by Diodes Inc. is an audio amplifier IC with 3W output power, 10% distortion, and 18dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. With a small outline package and thin profile, it's ideal for compact audio systems.
MAX98307ETE+T
Maxim Integrated
CLASS DG AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LM4880MX
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TAS5760MTDAPRQ1
TAS5760MTDAPRQ1 by Texas Instruments is an audio amplifier IC with 25W output power, suitable for industrial applications. It features a small outline package with 32 terminals and operates b/w -40 to 105°C temperature range. The IC supports dual-channel configuration and has a max supply voltage of 26.4V, making it ideal for automotive audio systems.
LM384N/NOPB
LM384N/NOPB by Texas Instruments is an audio amplifier IC with 14 terminals, offering a nominal output power of 5W and gain of 34dB. It operates b/w temperatures of 0-70°C, suitable for commercial applications requiring a bandwidth of 0.45kHz. The package style is in-line with dimensions of 19.18mm x 7.62mm x 5.08mm, making it ideal for audio and video amplification needs.
TDA1562Q/N3/S10C,1
NXP Semiconductors
TDA1562Q/N3/S10C,1 by NXP Semiconductors is an audio amplifier IC with 70W output power and 10% harmonic distortion. It has a gain of 26 dB, operates b/w -40°C to +125°C, and requires a supply voltage of 8-18V. Ideal for audio applications requiring high power output in a compact package.
MAX9700DEUB+
Analog Devices' MAX9700DEUB+ is a Class D audio amplifier with 3.3/5V power supplies, 0.8W output power, and 20dB gain. Its small outline package makes it ideal for industrial audio applications requiring high efficiency and low power consumption. With a wide operating temperature range (-40 to 85°C), this BICMOS technology amplifier offers reliable performance in various environments.
PGA2500IDBRG4
PGA2500IDBRG4 by Texas Instruments is an audio preamplifier with a gain of 23.5 dB. It operates at a min temperature of -40°C and max temperature of 85°C, making it suitable for industrial applications. With a small outline package style and surface mount capability, it offers flexibility in design and integration.
NCP2820MUTBG
NCP2820MUTBG by Onsemi is a Class D audio amplifier with 2.63W output power, suitable for industrial applications. It operates at temperatures from -40 to 85°C and requires a supply voltage of 2.5-5.5V. This surface-mount IC has a small outline package with very thin profile, making it ideal for compact designs.
LM386N-1/NOPB
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TDA7266D
TDA7266D by STMicroelectronics is a 2-channel audio amplifier with 5W output power and 26dB gain. It operates b/w 0-70°C, with a supply voltage range of 3.5-12V. Ideal for applications requiring small outline packages and low harmonic distortion levels.
TDA7388A
TDA7388A by STMicroelectronics is a Class AB audio amplifier with 4 channels and 27 terminals. It offers 27W nominal output power, operates at 14.4V, and has a harmonic distortion of 10%. Ideal for audio applications requiring high-quality sound amplification in vehicles or home entertainment systems.
LM6181IM-8
LM6181IM-8 by Texas Instruments is a video amplifier with 8 terminals, operating temperature range of -40 to 85°C, and nominal bandwidth of 50 kHz. It is used in audio/video applications due to its small outline package style, industrial temperature grade, and wide supply voltage range from 7V to 32V.
TAS2781RYYR
TAS2781RYYR by Texas Instruments is a Class D audio amplifier with 25W output power. It operates b/w -40 to 85°C, suitable for various audio and video applications. This chip carrier has a very thin profile, making it ideal for compact designs requiring high-quality sound amplification.
LM3886T
LM3886T by Texas Instruments is an audio amplifier IC with 11 terminals, offering a nominal output power of 68W and a max supply voltage of 84V. It operates b/w -20°C to 85°C, making it suitable for various audio applications requiring high power amplification in a rectangular package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
E-TDA7294V
E-TDA7294V by STMicroelectronics is an audio amplifier IC with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 0-70°C, suitable for commercial applications requiring high-quality audio amplification in a rectangular package style with flange mount.
E-TDA2003V
E-TDA2003V by STMicroelectronics is a rectangular audio amplifier with 1 function and 5 terminals. It has a nominal output power of 10W, gain of 40dB, and operates at a min supply voltage of 8V. This amplifier is commonly used in audio and video applications for its low harmonic distortion and wide nominal bandwidth of 0.022kHz.
E-TDA7396
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Nominal Output Power: 45 W;
E-TDA7391PDTR
AUDIO AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
E-TDA7560
E-TDA7560 by STMicroelectronics is a Class AB audio amplifier with 4 channels and 55W nominal output power. It features 10% harmonic distortion, BCDMOS technology, and operates at a min supply voltage of 13.2V. Ideal for audio and video applications requiring high-quality sound amplification in a rectangular package style with flange mount terminals.
E-TDA7560A
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Code: ZIP; Package Shape: RECTANGULAR; Nominal Bandwidth: .02 kHz;
E-TDA7490L
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT;
E-TDA7384A
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Gain: 26 dB;
E-TDA7562
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Shape: RECTANGULAR; Harmonic Distortion: 10 %; Minimum Supply Voltage (Vsup): 8 V;
E-TDA7563
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 27; Package Shape: RECTANGULAR; Nominal Bandwidth: .022 kHz; JESD-30 Code: R-PZFM-T27;
E-TDA7297D
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
E-TDA7386
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Code: SZIP; Package Shape: RECTANGULAR; Package Equivalence Code: ZIP25,.16,.16,40;
E-TDA7382
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT; Nominal Output Power: 22 W;
E-TDA7391PD
AUDIO AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage (Vsup): 18 V;
E-TDA7297
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 6.5 V;
E-TDA7385
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Code: SZIP; Package Shape: RECTANGULAR; Length: 29.23 mm;
E-TDA7296
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
E-TDA7375V
CLASS AB AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; JESD-30 Code: R-PZFM-T15; Nominal Bandwidth: .022 kHz;
E-TDA7454
AUDIO AMPLIFIER; Terminal Form: THROUGH-HOLE; No. of Terminals: 25; Package Shape: RECTANGULAR; Package Style (Meter): FLANGE MOUNT; Terminal Position: ZIG-ZAG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved