Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.
Median Price
$5.741
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$3.580
100+ parts
-
1k+ parts
10k+ parts
Maritex
$7.902
$5.562
$3.898
Vyrian
Chip Stock
Digiode
Anansix
Cyclops Electronics Ltd
ComSIT Distribution GmbH
AZTECH Wire
$1.070
$1.030
$1.010
$0.990
Corohmni
$3.299
Advanced Electronics
$3.398
$3.228
Continental Prestige Electronics
$3.508
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$7.380
IDEA Electronic Components Group
$7.416
$6.675
MKK Technologies
$13.946
DigiPath Technology Company
Microchip USA
$21.925
Ampacity Inc.
$32.500
Semicontronic
$38.500
$37.538
$37.345
RC Electronics
Perfect Parts
Lixinc
Futuretech Components
iodParts Technologies Inc.
Kepictronics
Corphita
Parana Technologies
$8.867
Robosynatics
Lucentia Tech
Plastic/Epoxy material provides good durability and protection for the internal components, ensuring a long-lasting product.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
High maximum supply voltage allows for compatibility with a wide range of power sources, making this peripheral driver versatile for various applications.
Multiple built-in protections ensure the safety and longevity of the device, as it can withstand different types of electrical faults or anomalies.
Wide range of power supply options gives flexibility in powering the peripheral driver, accommodating different voltage requirements in different systems.
Sufficient number of terminals allow for easy connectivity and integration with other components in the circuit.
Small outline design with heat sink/slug helps in efficient heat dissipation, ensuring stable and reliable performance even under heavy loads.
High maximum output current rating allows the peripheral driver to handle power-hungry devices or components, making it suitable for demanding applications.
Peripheral Drivers VN920SPTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
VN920SPTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Box Label Chg 28/Jul/2016 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Toshiba
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
ULN2003AFWG
Toshiba's ULN2003AFWG is a 16-terminal peripheral driver with open-collector output, ideal for buffer or inverter-based applications. With a small outline package style and gull wing terminals, it offers standard input characteristics and inverted output polarity. This bipolar technology device features transient protection and sink current flow direction, making it suitable for various electronic designs.
ISO1H812GAUMA1
Infineon Technologies
Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.
TPS22925CYPHR
TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.
BTS4175SGA
BTS4175SGA by Infineon Technologies is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 6V to 13.5V and has a max supply voltage of 52V. This rectangular-shaped device is ideal for applications requiring a small outline package style and sink output current flow direction.
VND5050KTR-E
STMicroelectronics
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
DS2482X-100+T
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
TPS22860DBVR
TPS22860DBVR by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates in industrial temperature range (-40 to 85°C) and has turn-on/off times of 0.015/0.02 us. Ideal for applications requiring fast switching speeds and compact design.
FPF2105
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
L9822EPD013TR
STMicroelectronics L9822EPD013TR is a SIPO-based peripheral driver with 20 terminals, operating voltage range of 4.75-5.25V, and built-in transient and overcurrent protections. Ideal for automotive applications, it offers a turn-on/off time of 10us and nominal output peak current limit of 1.05A.
BSP752RXUMA2/SAMPLE
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
MAX845ESA+
MAX845ESA+ by Analog Devices is a CMOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. This small outline package IC is ideal for industrial applications requiring buffer or inverter based drivers.
TPS27S100BRRKR
TPS27S100BRRKR by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C with a supply voltage range of 4-40V. Ideal for automotive applications due to its robust design and fast turn-on/off times of 80/50 µs.
IPS160HF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
SI1040X-T1-GE3
SI1040X-T1-GE3 by Vishay Intertechnology is a Peripheral Driver with 6 terminals, 8A output current, and built-in transient protection. It operates at supply voltages ranging from 1.8V to 8V and is ideal for buffer or inverter-based interface IC applications requiring source and sink current flow control.
VNH7100ASTR-E
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VNQ660SP-E
STMicroelectronics' VNQ660SP-E is a MOS technology peripheral driver with 6A output current, suitable for 6-24V power supplies. It features a small outline package with 10 terminals in gull wing form, ideal for surface mount applications.
L6203
STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.
MIC2545A-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VN5E016AHTR-E
ST Micro
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .85 mm;
VN7016AJEPTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
VN920B5TR-E
STMicroelectronics VN920B5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. Ideal for applications requiring source flow direction, it comes in a small outline package suitable for surface mount assembly.
VN920B5-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Maximum Output Current: 10 A;
VN920SP-E
VN920SP-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 30A. It is used as a buffer or inverter based peripheral driver, providing protection against transient, over current, over voltage, thermal, and under voltage conditions.
VN920DB5TR-E
STMicroelectronics' VN920DB5TR-E is a peripheral driver with 36V max supply voltage, 10A max output current, and built-in protections. It is used for buffer or inverter-based applications requiring transient, over current, over voltage, thermal, under voltage protection. The small outline package style makes it suitable for compact designs with limited space constraints.
VN920SO-E
STMicroelectronics' VN920SO-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates on power supplies ranging from 8V to 36V and has a max output current of 10A. Ideal for applications requiring buffer or inverter-based interface ICs with a source flow direction.
VN920SO
STMicroelectronics' VN920SO is a MOS technology-based peripheral driver with 16 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max output current of 10A and nominal output peak current limit of 45A, it's ideal for applications requiring sink flow direction like buffer or inverter based interface ICs.
VN920-B5
STMicroelectronics' VN920-B5 is a MOS technology-based peripheral driver with 4 terminals and built-in protections. It operates at supply voltages ranging from 5.5V to 36V, providing a max output current of 10A for applications requiring sink flow direction control. The small outline package with heat sink/slug makes it suitable for various automotive and industrial uses.
VN920-B5H13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Terminal Pitch: 1.7 mm; JESD-30 Code: R-PSSO-G4;
VN920SP13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 5.5 V;
VN920-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
VN920SP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
VN920
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; No. of Functions: 1;
VN920D-B5
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-263; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
VN920D-B513TR
STMicroelectronics' VN920D-B513TR is a MOS technology-based peripheral driver with 4 terminals and a max output current of 10A. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. Ideal for applications requiring a sink-type buffer or inverter interface IC with a nominal voltage of 13V and peak current limit of 45A.
VN920-B513TR
VN920-B513TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and a max output current of 10A. It is commonly used as a buffer or inverter based peripheral driver for applications requiring transient, over current, over voltage, thermal, and under voltage protections.
VN920DSP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
VN920DSP13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 13 V;
VN920DSPTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Driver No. of Bits: 1;
VN920(012Y)
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Minimum Supply Voltage: 5.5 V; Qualification: Not Qualified; Maximum Supply Voltage: 36 V; Nominal Supply Voltage: 13 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved