Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Telecom ICs;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Ampacity Inc.
$675.000
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Corphita
Aranea Global
WGM160PX22KGA2R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Bkc Semiconductors
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semtech
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CY7B923-JXC
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ISL32275EFVZ-T
Intersil
TELECOM CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
TM1062DSB2
Inrcore
TELECOM CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP28,.5;
ATA5551M-PPMY
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; Package Shape: UNSPECIFIED; JESD-30 Code: X-XXSS-X; Surface Mount: NO;
AX5243-1-TA05
Onsemi
AX5243-1-TA05 by Onsemi is a telecom IC with CMOS technology, operating b/w -40 to 85°C. It features 20 terminals in a square chip carrier package style, suitable for telecom circuit applications. With a nominal voltage of 3V and terminal pitch of 0.5mm, it offers high performance in industrial temperature grades.
ETRX357-LRS
Silicon Labs
Silicon Labs' ETRX357-LRS is a telecom IC with 33 terminals, operating from -40 to 85°C. With a supply voltage of 3V, it's ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and DUAL terminal position.
TLK2711AIRCP
TLK2711AIRCP by Texas Instruments is a telecom IC with 64 terminals, operating at 2.5V. It has a temperature range of -40 to 85°C and features a flatpack package style. Ideal for telecom circuit applications due to its industrial-grade performance and very thin profile design.
CC1200RHBR
CC1200RHBR by Texas Instruments is a telecom IC with 32 terminals, operating at 3V. It offers a data rate of 1.25 Mbps and operates in industrial temperature range (-40 to 85°C). This chip carrier package is surface mountable and suitable for telecom circuit applications.
WLR089U0-I/RM
Microchip Technology's WLR089U0-I/RM is a telecom IC with 12 Mbps data rate, operating at -40 to 85°C. It has 40 terminals in a rectangular package style for industrial use. Suitable for telecom interfaces, it offers a nominal voltage of 3.3V and surface-mount capability.
CY7B933-JXC
451-00002
Laird Technologies
Laird Technologies' 451-00002 is a surface mount telecom IC with 71 terminals. Operating b/w -40 to 85°C, it has a seated height of 2.35mm and nominal voltage of 3.3V. Ideal for telecom circuits, it offers data rates up to 2 Mbps in microelectronic assemblies.
CY7B923-JXI
Infineon Technologies
CY7B923-JXI by Infineon is a BICMOS telecom IC with 400 Mbps data rate, operating at 5V. It features a square chip carrier package style, matte tin terminal finish, and quad terminal position. Ideal for industrial applications requiring high-speed telecommunications interfaces.
BMD-300-A-R-00
U-blox Ag
BMD-300-A-R-00 by U-blox Ag is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is ideal for applications requiring high-speed telecommunications functionality.
CY7B923-JXC by Infineon is a BICMOS telecom IC with 28 terminals, operating at 5V. It has a data rate of 400 Mbps and can handle a max supply current of 85mA. This chip carrier package is ideal for telecom circuits requiring high-speed data transmission in commercial temperature environments.
AX-SFEU-1-01-TB05
AX-SFEU-1-01-TB05 by Onsemi is a Telecom Circuit IC with 40 terminals in a rectangular chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 3V. This surface-mount IC is ideal for telecom interface applications requiring a very thin profile and industrial temperature grade.
BM70BLES1FC2-0002AA
BM70BLES1FC2-0002AA by Microchip Tech is a 33-terminal IC with temp range -20 to 70°C. It operates at 3V, data rate of 0.0086 Mbps, ideal for telecom applications due to its nickel/gold finish and no-lead terminal form.
TLE8457BSJXUMA1
TLE8457BSJXUMA1 by Infineon is a BICMOS technology telecom IC with 8 terminals in a small outline package. It operates at a nominal voltage of 8V and has a terminal pitch of 1.27mm. This AEC-Q100 screened IC is ideal for telecom circuit applications due to its compact size and gull wing terminal form.
MAX-M8C-0
MAX-M8C-0 by U-blox Ag is a GNSS module with 18 terminals and a rectangular package shape. It operates in temperatures ranging from -40 to 85 °C, making it suitable for industrial applications. With a compact size of 9.7mm width and 10.1mm length, it is ideal for space-constrained projects.
PN5321A3HN/C106,51
PN5321A3HN/C106,51 by NXP Semiconductors is a telecom IC with 40 terminals in a square chip carrier package. Operating b/w -30 to 85°C, it has a nominal voltage of 5V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and has a low profile design.
AP22800HB-7
Diodes Incorporated
AP22800HB-7 by Diodes Inc. is an 8-terminal IC with a temp range of -40 to 85°C, suitable for industrial telecom circuits. It features a small outline package style, nickel palladium gold finish, and operates at a nominal voltage of 5V. Ideal for telecom interface applications requiring compact design and high reliability in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WGM160PX22KGA3
TELECOM CIRCUIT;
WGM160PX22KGA3R
WGM110E1MV2R
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
WGM160P022KGA3
WGM160PX22KGN3
WGM110A1MV2
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Shape: RECTANGULAR; No. of Functions: 1;
WGM110A1MV2R
WGM110A1MV2R by Silicon Labs is a telecom IC with 40 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.25mm. Ideal for industrial applications requiring compact surface-mount telecom interface ICs.
WGM160P022KGA2R
WGM160P022KGA2
WGM160P022KGN2R
WGM160P022KGN2
WGM160PX22KGN2R
WGM160PX22KGN2
WGM160P022KGA3R
WGM160P022KGN3R
WGM160P022KGN3
WGM160PX22KGN3R
WGM160PX22KGA2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved