Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Telecom ICs;
Median Price
$9.420
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
Ampacity Inc.
$455.000
Authorized Procurement Solutions
Corphita
WGM160P022KGA2R Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3203C
Idec
ROTARY SWITCH;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
NRF51822-QFAB-R7
Nordic Semiconductor Asa
NRF51822-QFAB-R7 by Nordic Semiconductor Asa is a 48-terminal telecom IC with a 1.8V supply voltage, operating b/w -25°C to 75°C. It features a square chip carrier package style and quad terminal position, suitable for telecom circuit applications requiring a very thin profile design.
OPA2380AIDGKTG4
OPA2380AIDGKTG4 by Texas Instruments is a dual-function telecom interface IC with 2 channels and a nominal voltage of 5V. It comes in a small outline, thin profile package style with a terminal pitch of 0.65mm. Ideal for automotive applications, it operates b/w -40 to 125°C and has low max supply current at 0.016mA.
MFRC52302HN1,151
NXP Semiconductors
NXP Semiconductors' MFRC52302HN1,151 is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -25°C to 85°C, with a nominal voltage of 3.3V. Ideal for applications requiring a very thin profile and surface mount compatibility.
PN7160B1EV/C100K
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MAYA-W160-00B
U-blox Ag
TELECOM CIRCUIT;
ODIN-W260
ODIN-W260 by U-blox Ag is a TELECOM CIRCUIT with 3.3V supply, operating from -40°C to 85°C. RECTANGULAR MICROELECTRONIC ASSEMBLY package for telecom interfaces, ideal for various applications requiring reliable connectivity in extreme temperature conditions.
TSC2000IPW
TSC2000IPW by Texas Instruments is a Telecom Interface IC with 20 terminals, operating temperature range of -40 to 85°C. It features CMOS technology, GULL WING terminal form, and SINGLE-ENDED input type. Ideal for telecom circuits due to its small outline package style and industrial temperature grade suitability.
BLE113-A-V1
Silicon Labs
BLE113-A-V1 by Silicon Labs is a surface mount telecom IC with 36 terminals, operating temperature range of -40 to 85°C. It features a rectangular package style, measures 15.725mm in length, and has a terminal pitch of 0.8mm. Ideal for industrial applications requiring low-profile telecom circuit integration.
BQ51013ARHLR
BQ51013ARHLR by Texas Instruments is a telecom interface IC with 20 terminals in a chip carrier package. It operates b/w 0-125°C, has a supply voltage of 5V, and data rate of 0.002 Mbps. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and very thin profile package style.
TLV320AIC22CPT
TLV320AIC22CPT by Texas Instruments is a 48-terminal telecom IC with 16-bit linear coding and A/MU-LAW companding law. It operates at temperatures ranging from -40 to 85°C, suitable for industrial applications. The package style is flatpack, low profile, fine pitch, making it ideal for surface mount designs.
ADRV9008BBCZ-1REEL
Analog Devices
Analog Devices ADRV9008BBCZ-1REEL is a telecom IC with 196 terminals in a low profile grid array package. It operates b/w -40 to 85°C, with a nominal voltage of 1.3V. Ideal for telecom circuit applications requiring fine pitch and bottom terminal position.
TM266DVA1
Pulser
TELECOM CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
SA602AN
Philips Components
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Package Code: DIP; Terminal Pitch: 2.54 mm; Minimum Operating Temperature: -40 Cel; Maximum Seated Height: 4.2 mm;
USB3740B-AI9TR
Standard Microsystems
USB3740B-AI9TR by Standard Microsystems is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a thin profile chip carrier package style, suitable for industrial applications at 5V supply voltage. With surface mount and quad terminal position, it's ideal for compact telecom circuit designs.
WL1805MODGBMOCT
WL1805MODGBMOCT by Texas Instruments is a telecom interface IC with 100 terminals in a rectangular grid array package. Operating at -20 to 70°C, it supports data rates up to 100 Mbps at 3.7V supply voltage. Ideal for commercial applications requiring high-speed telecommunications functionality.
BQ51013BYFPR
BQ51013BYFPR by Texas Instruments is a RECTANGULAR GRID ARRAY IC with 28 terminals, suitable for AUTOMOTIVE applications. It operates b/w -40 to 125 °C and has a supply voltage of 5V. With a data rate of 0.002 Mbps, it is ideal for TELECOM CIRCUITS requiring fine pitch and very thin profile packaging.
PN7161A1HN/C100E
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
NRF51822-QFAA-R
NRF51822-QFAA-R by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, -25 to 75°C operating temperature range, and 0.4mm terminal pitch. It is used in telecom circuits due to its square chip carrier package style and very thin profile, suitable for surface mount applications.
CY7B923-JXCT
Infineon's CY7B923-JXCT is a BICMOS telecom IC with 28 terminals, operating at 5V. It offers a data rate of 400 Mbps and operates b/w 0-70°C. Ideal for telecom circuits, this chip carrier has a matte tin finish and is surface mountable.
EQCO62T20.3
Microchip Technology
EQCO62T20.3 by Microchip Technology is a telecom interface IC with 1 function, 16 terminals, and a square package shape. It operates in an industrial temperature range of -40 to 85°C and has a nominal voltage of 1.2V. This IC is suitable for telecom circuit applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved