Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3;
Median Price
$5.476
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Verical
1+ parts
$5.382
100+ parts
$3.930
1k+ parts
$3.009
10k+ parts
-
Renesas
$5.570
$3.390
$2.831
$2.636
Chip1Stop
$6.310
$3.830
$3.160
$2.810
Newark
$7.820
$4.960
$3.510
Future Electronics
$3.090
Farnell
$2.500
$2.370
Nova Conductors
$2.775
Vyrian
Flip Electronics
IBS Electronics
$4.334
NAC Semi
$6.180
$5.620
Ampacity Inc.
$2.130
Semicontronic
$2.077
$2.066
Argo Parts USA
$2.240
Modulus Dynamics
$2.449
$2.424
$2.351
Netroflash
$2.720
Corohmni
$6.816
Advanced Electronics
$7.653
$7.270
Aztec Data Supply Inc.
$14.468
Futuretech Components
Authorized Procurement Solutions
Continental Prestige Electronics
$3.380
Infinite Electronics LLP (Excess)
Robosynatics
Lucentia Tech
Other Function Telecom Interface ICs DA14531MOD-00F01002 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Dialog Semiconductor
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Telecom IC Type:
DA14531MOD-00F01002 Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOKYO, Japan, August 31, 2021 JST | LONDON, United Kingdom, August 31, 2021 ― Renesas Electronics Corporation (TSE: 6723, “Renesas”), a premier supplier of advanced semiconductor solutions, and Dialog Semiconductor Plc (“Dialog”), a leading provider of battery and power management, Wi-Fi, Bluetooth® low energy and Industrial edge computing solutions, today announced the successful completion of Renesas’ acquisition of the entire issued and to be issued share capital of Dialog. Renesas will fund the cash consideration payable to Dialog shareholders of approximately EUR 4.8 billion (approximately 624.0 billion yen at an exchange rate of 130 yen to the Euro) through a combination of debt, cash on hand and the proceeds of an equity offering of approximately 222.6 billion yen.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CC2640R2FYFVT
Texas Instruments
CC2640R2FYFVT by Texas Instruments is a telecom IC with 34 terminals in a square grid array package. It operates b/w -40 to 85°C, with a supply voltage of 3V. With a very thin profile and fine pitch, it is ideal for industrial telecom applications requiring compact design and reliable performance.
ATWILC1000-MR110UB
Microchip Technology
ATWILC1000-MR110UB by Microchip Technology is a surface mount telecom interface IC with 1 function. It operates at temperatures ranging from -40 to 85 °C and has a data rate of 72.2 Mbps. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
RN52-I/RM
Microchip Technology's RN52-I/RM is a rectangular package IC with 40 terminals, 2.7mm height, and dimensions of 13.5mm x 26mm. It operates at a data rate of 3 Mbps and is used in telecom circuits for various applications requiring surface mount technology.
A2235-H
Lantronix
The Lantronix A2235-H is an industrial-grade telecom circuit IC with a nominal voltage of 3.3V. It operates b/w -40°C to 85°C, making it suitable for harsh environments. Packaged in a rectangular microelectronic assembly, it is ideal for telecom interface applications.
BGSF110GN26E6327XTSA1
Infineon Technologies
BGSF110GN26E6327XTSA1 by Infineon is a Telecom IC with 26 terminals in a rectangular chip carrier package. Operating temperature range from -30 to 85°C, suitable for telecom circuits. Utilizes CMOS technology with a nominal voltage of 3V, ideal for surface mount applications.
XB3-24DMCM-J
Digi International
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
STID135-WB
STMicroelectronics
LEA-M8S-0
U-blox Ag
LEA-M8S-0 by U-blox Ag is a surface mount RF and baseband circuit with 28 terminals. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 3V. This telecom IC is AEC-Q100 certified, suitable for automotive applications.
PM-8916-0-176NSP-TR-02-1-01
Qualcomm
PM-8916-0-176NSP-TR-02-1-01 by Qualcomm is a 176-terminal GRID ARRAY IC with HVCMOS technology, 0.4mm terminal pitch, and 3.6V supply voltage. It's used in TELECOM CIRCUITS due to its thin profile and fine pitch for telecom interface applications.
BLUENRG-132
BLUENRG-132 by STMicroelectronics is a 32-terminal telecom IC with a nominal voltage of 3V. It operates in industrial temperature range (-40 to 105°C) and has a compact square package style (5x5mm). Ideal for telecom circuits, it features surface mount capability and quad terminal position.
BGM111A256V2
Silicon Labs
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
NEO-M8Q-0-10
NEO-M8Q-0-10 by U-blox Ag is a MICROELECTRONIC ASSEMBLY with 24 terminals, operating from -40 to 85 °C. Ideal for TELECOM CIRCUIT applications due to its INDUSTRIAL temperature grade and 3V supply voltage requirement.
CLRC63201T/0FE,112
NXP Semiconductors
NXP Semiconductors' CLRC63201T/0FE,112 is a telecom IC with 32 terminals in a small outline package. Operating b/w -25°C to 85°C, it has a nominal voltage of 3.3V and peak reflow temperature of 250°C. Ideal for telecom circuits, this IC is surface mountable and features nickel palladium gold terminal finish.
HTRC11001T/02EE
NXP Semiconductors' HTRC11001T/02EE is a telecom interface IC with 14 terminals, operating at 5V. It features a small outline package style, industrial temperature grade, and nickel palladium gold terminal finish. Ideal for telecom circuits, this IC has a max seated height of 1.75mm and operates b/w -40 to 85°C.
XB3-24DMCM
TELECOM CIRCUIT;
MAX3799ETJ+T
Analog Devices
Analog Devices' MAX3799ETJ+T is a telecom IC with 32 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include 3.3V supply voltage, terminal pitch of 0.5mm, and peak reflow temp of 260°C.
MAX24287ETK+
Maxim Integrated
SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;
CY7B933-JXIT
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
AD8015ARZ
AD8015ARZ by Analog Devices is a telecom interface IC with 8 terminals in a small outline package. It operates b/w -40 to 85°C, with a supply current of 26mA at 5V. Ideal for industrial applications requiring high-speed telecom circuits.
CLRC66302HN,118
NXP Semiconductors' CLRC66302HN,118 is a 32-terminal IC with CMOS technology. It operates b/w -25 to 85 °C and has a nominal voltage of 5V. Ideal for telecom circuits, it comes in a square chip carrier package style suitable for surface mount applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DA14531-00000FX2
Dialog Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: BCC; Package Shape: RECTANGULAR;
DA14531-00000OG2
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 17; Package Code: VFBGA; Package Shape: RECTANGULAR;
DA14531MOD-00F0100C
DA14682-00F08A92
Other Telecom ICs; Peak Reflow Temperature (C): 255; Moisture Sensitivity Level (MSL): 3;
DA14683-00000U22
DA14583-01F01AT2
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3;
DA14AVDDECTSF01
Renesas Electronics
DA14580-01UNA
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 34; Package Code: VFBGA; Package Shape: SQUARE;
DA14583-01F01AT1
DA14586-00F02AT2
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
DA14531MOD-00F0100
Other Telecom ICs;
DA14581-00000VRA
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1;
DA14581-00AT1
DA14581-00AT2
DA14581-00UNA
DA14681-01000U2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved