Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8602AC-B-IS by Silicon Labs is an interface IC with 1 function, operating at a voltage range of 3-5.5V. It is suitable for automotive applications and has a small outline package style with dimensions of 4.9mm x 3.9mm.
Median Price
$3.751
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.570
100+ parts
$3.974
1k+ parts
$3.907
10k+ parts
-
Mouser Electronics
$6.000
$3.750
$3.510
$3.460
DigiKey
$6.050
$3.905
$3.578
$3.406
Arrow
Verical
Richardson RFPD
$3.710
RS (Exports)
$3.428
Digiode
$4.342
Nova Conductors
$4.641
Chip Stock
Vyrian
GLYN GmbH & Co. KG
Electronic Treasures
Sunrise Surplus Inc.
Ampacity Inc.
$2.910
Corphita
$4.113
Component Stockers USA
$4.220
$3.770
Aztec Data Supply Inc.
$4.333
Continental Prestige Electronics
$4.501
$4.410
Argo Parts USA
Netroflash
Advanced Electronics
$5.454
$5.181
Corohmni
$12.824
RC Electronics
$2.950
$2.780
$2.720
Kepictronics
Perfect Parts
Robosynatics
Lucentia Tech
This product is made with a durable plastic/epoxy body material, ensuring its longevity and resistance to various environmental conditions.
With surface mount capability, this product can be easily mounted onto PCBs, saving space and simplifying the assembly process.
This product can handle a maximum supply voltage of 5.5V, allowing it to work effectively with a wide range of power sources.
This product has one integrated function, simplifying circuit design and reducing the need for additional components.
Designed to meet the stringent requirements of the AEC-Q100 standard, this product ensures reliable performance in automotive applications.
The rectangular shape of this product allows for easy integration and placement within a variety of systems and devices.
With eight terminals, this product provides ample connection points for seamless integration into complex circuits.
The small outline package style of this product makes it ideal for space-constrained applications, where size and dimensions are crucial.
This product can operate with a minimum supply voltage of 3V, making it suitable for low-power applications and energy-efficient designs.
With a maximum operating temperature of 125°C, this product can withstand high-temperature environments and ensures reliable operation under demanding conditions.
The product is designed to operate in extreme cold environments, with a minimum operating temperature of -40°C, making it suitable for various applications.
The terminal finish of this product is made with tin, providing excellent conductivity and corrosion resistance for long-term reliability.
This product features dual terminal positions, allowing for flexible soldering or connection options to accommodate diverse circuit layouts.
With a maximum seated height of 1.75mm, this low-profile product can be easily integrated into compact devices without compromising space constraints.
The product has a compact width of 3.9mm, enabling its use in small-scale designs and optimized for space-limited applications.
This product can withstand a peak reflow temperature for up to 40 seconds, providing reliable soldering and assembly during manufacturing processes.
With a peak reflow temperature of 260°C, this product allows for efficient solder reflow and ensures secure connections during production.
The product has a length of 4.9mm, making it suitable for compact designs and enabling its integration into space-constrained systems.
Designed for automotive applications, this product meets the necessary temperature grading requirements for reliable performance in demanding automotive environments.
The gull-wing terminal form of this product offers stability during soldering, ensuring strong electrical connections and ease of assembly.
This product operates with a nominal supply voltage of 3.3V, providing compatibility with common voltage levels used in electronic systems.
The product has a terminal pitch of 1.27mm, allowing for easy PCB layout and making it suitable for fine-pitch designs.
With a moisture sensitivity level of 2A, this product is less prone to moisture-related damages during storage and assembly stages.
As an interface circuit type IC, this product allows for seamless communication and connectivity between various components, enhancing overall system performance.
Other Function Interface ICs SI8602AC-B-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI8602AC-B-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ADUM3160BRWZ-RL
ADUM3160BRWZ-RL by Analog Devices is a digital isolator with 16 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3-5.5V and uses CMOS technology. Ideal for industrial applications requiring high temperature tolerance and electrical isolation in a compact package.
ADUM141E1BRWZ-RL
ADUM141E1BRWZ-RL by Analog Devices is a 4-function digital isolator with a supply voltage range of 1.7V to 5.5V, ideal for automotive applications. It features a small outline package style, dual terminal position, and operates in temperatures ranging from -40°C to 125°C.
MAX4896ATP+T
MAX4896ATP+T by Analog Devices is a BICMOS technology interface IC with 8-bit driver. It operates b/w -40 to 85°C, with supply voltage range of 2.7-5.5V. Suitable for industrial applications requiring very thin profile and low output current (0.0001A).
HMC677LP5ETR
Hittite Microwave
ISO1540QDRQ1
Texas Instruments
ISO1540QDRQ1 by Texas Instruments is an AEC-Q100 compliant interface IC with 2 channels. It operates b/w -40 to 125 °C and has a supply voltage range of 3V to 5.5V, making it ideal for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and features dual Gull Wing terminals with Ni/Pd/Au finish.
ISO7741QDWQ1
ISO7741QDWQ1 by Texas Instruments is a CMOS interface IC with 4 channels, operating at -40 to 125 °C. It has a supply voltage range of 2.25-5.5 V and AEC-Q100 screening for automotive applications. The small outline package with 16 terminals is surface mountable, making it suitable for compact designs in automotive electronics.
SI8660BB-B-IS1
Silicon Labs
SI8660BB-B-IS1 by Silicon Labs is a digital isolator with 16 terminals and a small outline package style. It operates at a min voltage of 2.375 V and has a max supply voltage of 5.5 V. This IC is commonly used for other function interface applications in various industries.
ISO7741BDW
ISO7741BDW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and EIA-232/EIA-485 interface standards. It operates b/w -55 to 125 °C with supply voltage range of 2.25V to 5.5V. Ideal for military-grade applications requiring small outline package and dual terminal position.
ISO7240MDWR
ISO7240MDWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and 3.3V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for surface mount applications. With nickel palladium gold terminal finish, it's ideal for various function interface IC applications.
ISO7842DWR
ISO7842DWR by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and MILITARY temperature grade. It operates b/w -55 to 125 °C and has a supply voltage range of 2.25-5.5 V. Ideal for applications requiring high reliability in harsh environments.
ADUM1301ARWZ
ADUM1301ARWZ by Analog Devices is a 16-terminal IC with 3 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with gull wing terminals.
ADG3304BRUZ-REEL7
ADG3304BRUZ-REEL7 by Analog Devices is a CMOS interface IC with 14 terminals, operating at -40 to 85 °C. It has a supply voltage range of 1.15-5.5 V and is suitable for industrial applications requiring thin profile, surface-mount ICs with dual terminal positions.
PCA9517ADP/DG
NXP Semiconductors
PCA9517ADP/DG by NXP Semiconductors is an 8-terminal IC with a supply voltage range of 0.9V to 5.5V, suitable for industrial applications. It features a small square package style, CMOS technology, and operates b/w -40°C to 85°C. Ideal for interface circuits requiring a compact design and surface mount capability.
ADUM5200ARWZ-RL
ADUM5200ARWZ-RL by Analog Devices is a 16-terminal interface IC with a supply voltage range of 3V to 3.6V, operating from -40°C to 105°C. It features a small outline package and matte tin terminal finish, suitable for industrial applications requiring reliable signal isolation in compact designs.
ADUM5401WCRWZ
ADUM5401WCRWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates b/w -40 to 105°C, suitable for industrial applications. With a supply voltage range of 3-5.5V, it features dual terminal position and matte tin finish for robust performance in various electronic systems.
P82B96TD/S900,118
P82B96TD/S900,118 by NXP Semiconductors is a BUS BUFFERS interface IC with 2 functions and operates b/w -40 to 125 °C. It has a supply voltage range of 2-15 V, making it suitable for automotive applications due to its small outline package style.
PCA9306USG
PCA9306USG by Onsemi is a small outline interface IC with 8 terminals. It operates b/w -55 to 125°C, making it suitable for military-grade applications. The package is rectangular, surface-mountable, and has a terminal pitch of 0.5mm.
SI8660BC-B-IS1R
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
ISO1641BDR
ISO1641BDR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 2.25V to 5.5V, suitable for automotive applications. It features dual terminal position, Gull Wing form, and operates in temperatures from -40°C to 125°C. The small outline package has a rectangular shape and measures 4.905mm x 3.895mm with a max seated height of 1.75mm.
PCA9615DPJ
PCA9615DPJ by NXP Semiconductors is a small outline, thin profile interface IC with 10 terminals. It operates b/w -40 to 85°C, with supply voltage ranging from 2.3V to 5.5V. Ideal for industrial applications requiring reliable communication at peak reflow temperature of 260°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
SI8661BB-B-IS1
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved