Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4010-C2-GSR by Silicon Labs is a telecom IC with 14 terminals in a small outline package. Operating b/w -40 to 85°C, it has a CMOS technology and nominal voltage of 3.3V. Ideal for telecom circuits, this IC is surface mountable and has a peak reflow temperature of 260°C.
Median Price
$4.495
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.430
100+ parts
$4.220
1k+ parts
$3.030
10k+ parts
$2.880
Chip1Stop
-
$2.560
Arrow
Verical
Digiode
$2.721
Nova Conductors
$3.420
Chip Stock
Vyrian
Cyclops Electronics Ltd
Ampacity Inc.
$2.180
Semicontronic
$2.126
$2.115
Corphita
$2.578
Continental Prestige Electronics
$3.352
Argo Parts USA
Netroflash
Corohmni
$7.070
Advanced Electronics
$7.441
$6.771
$6.102
Aztec Data Supply Inc.
$13.890
Kepictronics
Lixinc
Authorized Procurement Solutions
RC Electronics
GreenTree Electronics
iodParts Technologies Inc.
Assy Fe
The use of plastic/epoxy material in the package body ensures durability and reliability of the product.
Surface mount technology allows for easy integration of the IC into PCBs, saving space and improving assembly efficiency.
Having 14 terminals provides flexibility in connecting the IC to various components in the telecom interface circuit.
With a high maximum operating temperature of 85 °C, this IC can withstand a wide range of operating conditions.
The compact width of 3.9 mm allows for efficient use of space on the PCB.
CMOS technology offers low power consumption and high noise immunity, making the IC energy efficient and reliable.
Operating at a nominal supply voltage of 3.3 V, this IC is compatible with common power sources in telecom applications.
Other Function Telecom Interface ICs SI4010-C2-GSR attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4010-C2-GSR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si4010 DS Rev 18/Aug/2020
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1554216002
Molex
WIRE AND CABLE;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
SN65DSI84ZQER
SN65DSI84ZQER by Texas Instruments is a 64-terminal telecom IC with a data rate of 1 Mbps. It operates b/w -40 to 85°C, suitable for industrial use. The package style is grid array with very thin profile and fine pitch, making it ideal for telecommunications applications.
450-0177R
Ls Research
TELECOM CIRCUIT;
U2270B-MFPY
Atmel
U2270B-MFPY by Atmel is a telecom interface IC with 1 function. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 105 °C. It is commonly used in telecom circuits for various applications.
MAX2769CETI+
Maxim Integrated
TELECOM CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
LMH0384SQE/NOPB
National Semiconductor
Other Telecom ICs; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
BG96MA-128-SGN
Quectel Wireless Solutions
BG96MA-128-SGN by Quectel is a telecom IC with 102 terminals, operating from -40 to 85°C. It has a compact rectangular package, measuring 22.5mm in width and 26.5mm in length, suitable for industrial applications requiring a nominal voltage of 3.8V.
ADF7012BRUZ-RL
Analog Devices
Analog Devices' ADF7012BRUZ-RL is a telecom IC with 24 terminals, operating at 2.5/3.3V. It has a temperature range of -40 to 85°C and uses CMOS technology. The package style is small outline, thin profile, shrink pitch, making it suitable for industrial telecom applications.
EM357-RTR
Silicon Labs
Silicon Labs' EM357-RTR is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40°C to 85°C, suitable for industrial use. With a nominal voltage of 1.25V, it's ideal for telecom circuit applications requiring surface mount technology.
AT86RF215-ZU
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
HMC566LP4E
Hittite Microwave
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BGM111A256V2
BGM111A256V2 by Silicon Labs is a telecom IC with 31 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1.2mm. This rectangular surface-mount package is ideal for industrial applications requiring reliable telecom circuit interfaces.
DWM1000
Qorvo
The Qorvo DWM1000 is a surface-mount telecom IC with 24 terminals, operating temperature range of -40 to 85°C. It features a data rate of 6.8 Mbps and CMOS technology, suitable for industrial applications requiring precise wireless communication in compact spaces.
ZOE-M8Q-0
U-blox Ag
ZOE-M8Q-0 by U-blox Ag is a telecom IC with 51 terminals, operating at -40 to 85°C. It features a thin profile grid array package, 0.5mm terminal pitch, and 3V supply voltage. Ideal for industrial applications requiring precise positioning and reliable connectivity in compact spaces.
CY7B923-JXCT
Infineon Technologies
Infineon's CY7B923-JXCT is a BICMOS telecom IC with 28 terminals, operating at 5V. It offers a data rate of 400 Mbps and operates b/w 0-70°C. Ideal for telecom circuits, this chip carrier has a matte tin finish and is surface mountable.
PN5321A3HN/C106
NXP Semiconductors
PN5321A3HN/C106 by NXP Semiconductors is a telecom IC with 40 terminals in a square chip carrier package. Operating from -30 to 85°C, it features nickel palladium gold terminal finish and quad position. With a compact size of 6x6mm and 0.5mm pitch, it's ideal for telecom circuit applications.
MFRC63102HN,151
The NXP Semiconductors MFRC63102HN,151 is a telecom interface IC with 32 terminals in a square chip carrier package. Operating temperature range from -25 to 85 °C, with data rate of 0.4 Mbps. Ideal for telecom circuits requiring a nominal voltage of 5V and surface mount compatibility.
CC2642R1FRGZT
CC2642R1FRGZT by Texas Instruments is a telecom IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This surface-mount IC is ideal for industrial applications requiring very thin profile components.
XB3-24Z8CM-J
Digi International
XB3-24Z8CM-J by Digi International is a telecom IC with 34 terminals, suitable for industrial use. It operates b/w -40°C to 85°C, in a rectangular microelectronic assembly package measuring 13mm x 19mm. This surface-mount IC is ideal for various telecom interface applications.
MAX-M8C-0-10
MAX-M8C-0-10 by U-blox Ag is an AEC-Q100 certified GNSS Module with 18 terminals. Operating temperature range from -40 to 85°C, ideal for industrial applications. Compact MICROELECTRONIC ASSEMBLY package measuring 9.7mm x 10.1mm x 2.7mm suits telecom interfaces.
SA606DK/01,118
SA606DK/01,118 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, with terminal finish of nickel palladium gold. Ideal for telecom circuits requiring nominal voltage of 3V and industrial temperature grade.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4010-C2-GTR
SI4010-C2-GTR by Silicon Labs is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and uses CMOS technology. This small outline package is ideal for telecom circuit applications due to its industrial temperature grade and surface mount capability.
SI4010-C2-GS
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SI4010-C2-GT
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SI4012-C1001GT
SI4010-C2-ATR
SI4012-C1001GTR
SI4063-B1B-FMR
SI4063-B1B-FMR by Silicon Labs is a telecom IC with 20 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Nominal voltage of 3.3V, terminal pitch of 0.5mm, ideal for telecom circuit applications.
SI4063-C2A-GMR
SI4063-C2A-GMR by Silicon Labs is a 20-terminal chip carrier with a square package shape. Operating from -40 to 85°C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. Ideal for telecom interfaces, this surface-mount device has a very thin profile and quad terminal position.
SI4060-B1B-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4063-C2A-GM
SI4060-C2A-GMR
SI4060-C2A-GMR by Silicon Labs is a telecom IC with 20 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 3.3V and terminal pitch of 0.5mm, ideal for telecom interface applications.
SI4060-B1B-FMR
SI4010-C2-ASR
SI4010-C2-AS
SI4012-C1001AT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved