Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4010-C2-GT by Silicon Labs is a telecom IC with 10 terminals in a small outline package. It operates b/w -40 to 85°C, with a supply voltage of 3.3V. The IC is designed for telecom circuits, featuring CMOS technology and Gull Wing terminal form.
Median Price
$4.245
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Newark
1+ parts
$2.410
100+ parts
$2.010
1k+ parts
$1.830
10k+ parts
-
Element14
$3.700
$3.090
$2.980
Mouser Electronics
$4.790
$3.130
$2.660
$2.640
DigiKey
$5.390
$3.925
$3.405
Nova Conductors
$2.760
Digiode
$3.477
Bristol Electronics
$4.104
Chip Stock
Vyrian
AZTECH Wire
$1.780
$1.710
$1.680
$1.640
Continental Prestige Electronics
$2.705
Argo Parts USA
Netroflash
$2.622
$2.567
Ampacity Inc.
$3.110
Corphita
$3.294
Aztec Data Supply Inc.
$6.635
Corohmni
$7.231
RC Electronics
Lixinc
Kepictronics
Futuretech Components
Plastic/Epoxy material provides durability and protection for the IC, ensuring a longer lifespan.
Surface mount technology allows for easy and efficient assembly onto PCBs, saving time and reducing manufacturing costs.
Having 10 terminals provides ample connectivity options for various telecom interfaces.
With a high maximum operating temperature, this IC can perform reliably in a range of environments.
CMOS technology offers low power consumption and high noise immunity, making the IC energy-efficient and reliable.
Operating at a nominal supply voltage of 3.3V makes this IC compatible with a wide range of telecom systems and devices.
Other Function Telecom Interface ICs SI4010-C2-GT attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4010-C2-GT Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Si4010 DS Rev 18/Aug/2020
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Jinan Jingheng Electronics
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Won-top Electronics
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
ST25R3916-BWLT
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LM2893M
National Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
SN65DSI83ZQET
SN65DSI83ZQET by Texas Instruments is a telecom interface IC with 64 terminals in a square grid array package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 1.8V and terminal pitch of 0.5mm, ideal for telecom circuit applications.
EVA-M8Q-0
U-blox Ag
EVA-M8Q-0 by U-blox Ag is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a compact square package, 1.16mm height, and requires 3.3V supply voltage. Ideal for industrial applications requiring precise positioning and navigation systems in small form factors.
AX-SFEU-1-01-TB05
AX-SFEU-1-01-TB05 by Onsemi is a Telecom Circuit IC with 40 terminals in a rectangular chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 3V. This surface-mount IC is ideal for telecom interface applications requiring a very thin profile and industrial temperature grade.
HMC799LP3ETR
Analog Devices
Analog Devices' HMC799LP3ETR is a 16-terminal telecom IC with 5V supply, operating from -40 to 85°C. It's a surface-mount chip carrier package suitable for industrial applications, drawing max 80mA current. With matte tin finish and quad terminal position, it's ideal for telecom circuit interfaces.
SN65DSI86IPAPRQ1
SN65DSI86IPAPRQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 85°C, with terminal finish of NiPdAu. This IC has a nominal voltage of 1.2V and is suitable for industrial temperature grade applications.
AT86RF215M-ZUR
Microchip Technology
AT86RF215M-ZUR by Microchip Technology is a telecom IC with RF and baseband circuit. It operates at -40 to 85 °C temperature range, has 48 terminals, and a very thin profile package style. It is suitable for various telecom interface applications.
RN41-I/RM630
Microchip Technology's RN41-I/RM630 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and gold over nickel terminal finish. Suitable for industrial applications, it comes in a rectangular package style with surface mount capability.
PM-8916-0-176NSP-TR-02-1-01
Qualcomm
PM-8916-0-176NSP-TR-02-1-01 by Qualcomm is a 176-terminal GRID ARRAY IC with HVCMOS technology, 0.4mm terminal pitch, and 3.6V supply voltage. It's used in TELECOM CIRCUITS due to its thin profile and fine pitch for telecom interface applications.
BMD-340-A-R-10
BMD-340-A-R-10 by U-blox Ag is a surface mount telecom IC with 68 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it is ideal for high-speed telecommunications applications.
CYBLE-214015-01
Infineon Technologies
CYBLE-214015-01 by Infineon Technologies is a surface mount telecom IC with 1 function and 32 terminals. It has a square package shape, measuring 11mm in width and length, with a max seated height of 1.8mm. With an operating temperature range of -40 to 85°C, it is suitable for industrial applications.
RN4678APL-V/RM122
RN4678APL-V/RM122 by Microchip Tech is a surface mount IC with 33 terminals, operating temp range of -20 to 70°C. Telecom circuit type with nominal voltage of 1.9V. Ideal for telecom interfaces due to its compact rectangular package style and no-lead terminal form.
TLV320AIC22CPT
TLV320AIC22CPT by Texas Instruments is a 48-terminal telecom IC with 16-bit linear coding and A/MU-LAW companding law. It operates at temperatures ranging from -40 to 85°C, suitable for industrial applications. The package style is flatpack, low profile, fine pitch, making it ideal for surface mount designs.
CYBLE-212006-01
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 30; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MAX2771ETI+
Maxim Integrated
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
EQCO62T20.3-TRAY
EQCO62T20.3-TRAY by Microchip Technology is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 1.2V. Ideal for telecom circuit applications, it features a very thin profile and no-lead terminal form for industrial use.
AFE031AIRGZT
AFE031AIRGZT by Texas Instruments is a 48-terminal telecom IC with a 3.3V supply voltage and low current draw of 0.0053mA. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for telecom circuit applications requiring high reliability and performance in harsh environments. The chip carrier package style with a very thin profile and surface mount capability enhances its versatility for compact designs.
CC2640R2FRSMR
CC2640R2FRSMR by Texas Instruments is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. Suitable for telecom circuits, it has a terminal pitch of 0.4mm and is designed for industrial temperature grades.
NRF52840-QIAA
Nordic Semiconductor Asa
NRF52840-QIAA by Nordic Semiconductor Asa is a 73-terminal IC with 3V supply voltage, operating from -40 to 85°C. It features a grid array package style, suitable for industrial telecom circuits. With a 0.5mm terminal pitch and 0.85mm seated height, it offers high performance in compact applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4010-C2-GTR
Silicon Labs
SI4010-C2-GTR by Silicon Labs is a telecom IC with 10 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and uses CMOS technology. This small outline package is ideal for telecom circuit applications due to its industrial temperature grade and surface mount capability.
SI4010-C2-GSR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SI4010-C2-GS
SI4012-C1001GT
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SI4010-C2-ATR
SI4012-C1001GTR
SI4063-B1B-FMR
SI4063-B1B-FMR by Silicon Labs is a telecom IC with 20 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Nominal voltage of 3.3V, terminal pitch of 0.5mm, ideal for telecom circuit applications.
SI4063-C2A-GMR
SI4063-C2A-GMR by Silicon Labs is a 20-terminal chip carrier with a square package shape. Operating from -40 to 85°C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. Ideal for telecom interfaces, this surface-mount device has a very thin profile and quad terminal position.
SI4060-B1B-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4063-C2A-GM
SI4060-C2A-GMR
SI4060-C2A-GMR by Silicon Labs is a telecom IC with 20 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It has a nominal voltage of 3.3V and terminal pitch of 0.5mm, ideal for telecom interface applications.
SI4060-B1B-FMR
SI4010-C2-AT
SI4012-C1001ATR
SI4012-C1001AT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved