Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI1147-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, 10-500mm measurement range, and I2C interface. Ideal for surface mount applications in temperature ranges from -40 to 85°C, it offers precise photoelectric sensing capabilities in a compact rectangular package.
Median Price
$4.080
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$3.410
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$5.980
$4.534
Verical
Chip1Stop
Nova Conductors
$3.940
Digiode
$4.798
Bristol Electronics
$6.648
$3.124
$2.859
Vyrian
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$3.470
Corphita
$4.545
Authorized Procurement Solutions
High maximum supply voltage allows for flexibility in power source options.
Wide body width provides stability and durability to the sensor.
Combination of proximity sensor and photoelectric technology ensures accurate and reliable detection.
Low profile design makes it suitable for applications with limited space.
Rectangular shape allows for easy integration and mounting in various setups.
Low minimum supply voltage helps in energy efficiency and battery-powered applications.
High maximum operating temperature ensures reliable performance in harsh environments.
Wide temperature range capability makes it suitable for use in extreme cold conditions.
Nickel/gold terminal finish offers high conductivity and corrosion resistance.
Compact body length/diameter allows for easy installation in tight spaces.
Solder termination ensures secure and reliable electrical connections.
I2C interface facilitates easy communication with other electronic components.
High maximum measurement range enables detection of objects at a distance.
Surface mount capability simplifies installation and ensures stability.
Low minimum measurement range allows for detection of nearby objects with precision.
Proximity Sensors SI1147-M01-GMR attributes and parameters. Explore more Proximity Sensors devices from Silicon Labs
Body Width:
Body Height:
Body Length/Diameter:
JESD-609 Code:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
PCN Obsolescence/ EOL - Si1132/Si114x 31/Mar/2020
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
59135-3-V-02-A
Littelfuse
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Body Width: 19.05 inch; Maximum Operating Current: 250 mA;
MK20/1-B-100W
Standex-meder Electronics
MK20/1-B-100W by Standex-Meder Electronics is a 10mm cylindrical proximity sensor with a response time of 100us. Operating temperature ranges from -30°C to 70°C, housed in PBT 30%GF material. Ideal for applications requiring fast and accurate detection in industrial settings.
SI1145-M01-GMR
Silicon Labs
SI1145-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, -40 to 85°C operating temperature, and 10-500mm measurement range. Ideal for photoelectric applications, it features I2C interface and surface mounting for easy integration in various devices.
STM8T143AULET2TR
STM8T143AULET2TR by STMicroelectronics is a capacitive proximity sensor with 2.3-5.5V supply voltage range, 0.07-4.9V output, and 850000us response time. Ideal for surface mount applications in temperature-sensitive environments like automotive or industrial settings due to its -40 to 85 °C operating range.
MP201801
Zf Friedrichshafen Ag
PROXIMITY SENSOR,HALL EFFECT; Mounting Feature: PANEL MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Width: 5.99 inch; Maximum Operating Current: 500 mA;
59065-1-V-01-A
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Termination Type: CABLE; Output Interface Type: 2-WIRE INTERFACE; Maximum Operating Current: 500 mA; Maximum Operating Temperature: 105 Cel;
H1512-006
NXP Semiconductors
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Body Height: 5.26 mm; Additional Features: TTL COMPATIBLE; Maximum Measurement Range (mm): 1.52 mm;
59070-3-S-04-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 8 mm; Output Interface Type: 2-WIRE INTERFACE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel;
E2NC-ED02-F
Omron
PROXIMITY SENSOR,INDUCTIVE;
9212661054
The Standex-Meder Electronics 9212661054 is a proximity sensor with a body width of 19" and height of 6.25mm. It operates b/w -30°C to 70°C, housed in polyester material. This rectangular sensor features a wire termination type and 1-wire interface, suitable for various photoelectric applications.
59060-4-T-03-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Termination Type: CABLE; Minimum Operating Temperature: -40 Cel; Response Time: 3000 us;
E2E-X5MF1
Omron E2E-X5MF1 is a 24V inductive proximity sensor with a 5mm measurement range. Featuring a cylindrical brass housing, it operates b/w -40°C to 85°C and outputs an analog current of up to 200mA. Ideal for industrial automation applications requiring precise object detection in harsh environments.
FLDM170G1011/S42
Baumer Electric Ag
Baumer Electric Ag's FLDM170G1011/S42 is a 30mm x 70mm x 170mm proximity sensor with a 3-wire interface. It operates b/w 0-50°C, with a supply voltage range of 10-30V and max measurement range of 90mm. Ideal for panel mounting applications requiring precise detection in industrial settings.
GXL-8HU
Panasonic
The Cherry
The Cherry MP201801 is a proximity sensor with a max supply voltage of 175V. It has a response time of 600us and can operate in temperatures ranging from -40°C to 105°C. This rectangular sensor, with dimensions of 5.99" x 23.01mm x 11mm, is ideal for panel mounting applications requiring precise measurements within a range of 17.8mm to 6.35mm.
MK06-4-C
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 3.3 inch; Body Height: 3.3 mm; Minimum Operating Temperature: -20 Cel;
MK23-80-C-2
MK23-80-C-2 by Standex-Meder Electronics is a magnetic proximity sensor with a response time of 100 us. It operates in temperatures ranging from -40 to 130 °C and features a cylindrical package shape. Ideal for surface mount applications, this sensor has a body length/diameter of 7 mm and solder termination.
MK24-A-2
MK24-A-2 by Standex-Meder Electronics is a proximity sensor with dimensions 2.2" x 1.8mm x 5mm, operating b/w -40°C to 130°C. It features a rectangular shape, solder termination, and surface mount capability. Ideal for applications requiring precise photoelectric sensing in various environments.
MK24-B-2
MK24-B-2 by Standex-Meder Electronics is a 2.2" proximity sensor with a rectangular shape, suitable for surface mount applications. It operates b/w -40°C to 130°C, making it versatile for various environments. With solder termination and photoelectric sensor type, it offers precise detection capabilities.
BI4U-EM12WD-AP6X-H1141
Hans Turck & Kg
BI4U-EM12WD-AP6X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output type. It operates b/w -40 to 100°C, with a max supply voltage of 30V and current of 200mA. Ideal for flush mounting applications, it features a stainless steel housing and a barrel-shaped package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Width: 2.85 inch; Termination Type: SOLDER;
SI1133-AA00-GMR
PROXIMITY SENSOR,PHOTOELECTRIC;
SI1142-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Height: 1.2 mm; Output Interface Type: I2C INTERFACE;
SI1143-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 4.9 mm; Body Height: 1.2 mm;
SI1146-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 2.85 inch; Body Length/Diameter: 4.9 mm; Minimum Supply Voltage: 1.71 V;
SI1142-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Interface Type: I2C INTERFACE; Termination Type: SOLDER;
SI1141-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Maximum Operating Current: 5.5 mA;
SI1141-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Height: 1.2 mm; Body Width: 2.85 inch;
SI1143-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Operating Current: 5.5 mA; Minimum Supply Voltage: 1.71 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved