Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI1141-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, I2C interface, and -40 to 85°C operating temperature. Ideal for photoelectric applications, it features a compact rectangular design suitable for surface mount installations.
Median Price
$3.354
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$3.348
100+ parts
$3.194
1k+ parts
$3.041
10k+ parts
Chip1Stop
$4.180
-
Flip Electronics (Authorized)
DigiKey
$3.360
Verical
Digiode
$3.181
Vyrian
Flip Electronics
Nova Conductors
EPE Components Inc.
Bristol Electronics
AZTECH Wire
$0.610
$0.590
$0.570
$0.560
Ampacity Inc.
$2.850
Corphita
$3.013
Argo Parts USA
Continental Prestige Electronics
Kepictronics
Aranea Global
This high maximum supply voltage allows for flexibility in power sources and compatibility with a variety of systems.
The compact body width makes it suitable for applications where space is limited.
Having both proximity sensor and photoelectric capabilities enhances the sensor's versatility for different detection needs.
The low body height allows for discreet installation and minimizes obstruction in the application.
The rectangular shape provides ease of mounting and integration into various systems.
The low minimum supply voltage ensures efficient power consumption and compatibility with lower voltage systems.
With a high maximum operating temperature, this sensor can withstand harsh environmental conditions and operate reliably in various settings.
The low minimum operating temperature allows the sensor to function effectively in cold environments without risk of damage.
The small body length/diameter size enables the sensor to be used in tight spaces or applications with size restrictions.
The solder termination type ensures secure and reliable electrical connections for stable performance.
The I2C interface type offers a convenient and standardized communication protocol for easily interfacing the sensor with other devices.
The surface mount feature simplifies installation and allows for secure attachment to the application surface.
Proximity Sensors SI1141-M01-GMR attributes and parameters. Explore more Proximity Sensors devices from Silicon Labs
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Meritek Electronics
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Intersil
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Bytesonic Electronics
935300777518
NXP Semiconductors
PROXIMITY SENSOR,CAPACITIVE;
SI1143-A11-GMR
Silicon Labs
SI1143-A11-GMR by Silicon Labs is a proximity sensor with 1.71V-3.6V supply voltage range, -40°C to 85°C operating temperature, and 5.5mA max current draw. It features an analog voltage output interface and is ideal for photoelectric proximity sensing applications in a compact 2mm x 2mm square package.
59070-3-S-04-D
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Response Time: 3000 us; Termination Type: CABLE; Body Height: 38.1 mm;
59170-1-U-00-A
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Body Width: 2.29 inch;
59060-1-S-02-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE; Body Height: 36 mm; Response Time: 1000 us;
59150-1-S-02-A
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Maximum Operating Temperature: 105 Cel; Termination Type: CABLE;
59065-4-U-05-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Output Interface Type: 2-WIRE INTERFACE; Body Length/Diameter: 8 mm; Termination Type: CABLE;
MAX25205EQP/VY+
PROXIMITY SENSOR,PHOTOELECTRIC;
MK23-35-B-2
Standex-meder Electronics
MK23-35-B-2 by Standex-Meder Electronics is a proximity sensor with a body height of 1.9mm and response time of 100us. It operates b/w -40°C to 130°C, making it suitable for various applications requiring precise detection in compact spaces. With a cylindrical shape and surface mount feature, it offers easy installation and reliable performance in industrial automation systems.
59065-3-S-04-D
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 250 mA; Output Interface Type: 2-WIRE INTERFACE; Body Length/Diameter: 8 mm; Maximum Operating Temperature: 105 Cel;
E2E-C04S12-WC-B1-R5M
Omron
Omron E2E-C04S12-WC-B1-R5M is an inductive proximity sensor with 30V max supply voltage, 25.1mm body height, and NPN output type. Ideal for panel mounting applications, it operates b/w -25°C to 70°C with a measurement range of 0-1.2mm.
59021-1-S-02-E
E2E-C04S12-WC-B1-R2M
Omron E2E-C04S12-WC-B1-R2M is an inductive proximity sensor with 30V max supply voltage, 25.1mm body height, and NPN output type. Ideal for panel mounting applications, it operates b/w -25°C to 70°C with a measurement range of 0-1.2mm.
MK15-B-2BULK
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 2.6 mm; Body Length/Diameter: 16 mm; Termination Type: SOLDER;
59170-1-U-00-D
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 11.43 mm; Minimum Operating Temperature: -40 Cel; Response Time: 1000 us;
MK17-B-2
MK17-B-2 by Standex-Meder Electronics is a 2.1" proximity sensor with a response time of 100 us. Ideal for surface mount applications, it operates b/w -40°C to 130°C temperatures. Featuring epoxy resin housing, this rectangular sensor is perfect for photoelectric sensing needs.
59135-3-T-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 250 mA; Body Height: 6.35 mm; Body Length/Diameter: 28.57 mm;
TDA0161FPT
STMicroelectronics
TDA0161FPT by STMicroelectronics is an inductive proximity sensor with a supply voltage range of 4-35V. It offers an output current range of 0-10mA and operates at temperatures up to 150°C. Ideal for surface mount applications, this rectangular sensor is housed in plastic and terminated with matte tin finish.
59065-3-T-03-D
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE; Body Length/Diameter: 8 mm; Maximum Operating Current: 250 mA;
H1320-001
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Housing: STAINLESS STEEL; Termination Type: CABLE; Minimum Measurement Range (mm): 0 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI1133-AA00-GMR
SI1145-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Width: 2.85 inch; Termination Type: SOLDER;
SI1142-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Interface Type: I2C INTERFACE; Termination Type: SOLDER;
SI1141-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Maximum Operating Current: 5.5 mA;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Operating Current: 5.5 mA; Minimum Supply Voltage: 1.71 V;
SI1141-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Output Interface Type: I2C INTERFACE;
SI1142-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Body Width: 2 inch;
SI1143-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Minimum Supply Voltage: 1.71 V; Minimum Operating Temperature: -40 Cel;
SI1142-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Height: 1.2 mm; Output Interface Type: I2C INTERFACE;
SI1143-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 4.9 mm; Body Height: 1.2 mm;
SI1146-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 2.85 inch; Body Length/Diameter: 4.9 mm; Minimum Supply Voltage: 1.71 V;
SI1147-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Length/Diameter: 4.9 mm; Minimum Measurement Range (mm): 10 mm;
SI1141-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Body Width: 2 inch; Maximum Operating Current: 5.5 mA;
SI1142-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Width: 2 inch; Output Interface Type: I2C INTERFACE;
SI1143-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Additional Features: AEC-Q100; Maximum Operating Current: 5.5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved