Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI1141-A11-GMR by Silicon Labs is a proximity sensor with 3.6V max supply voltage, 85°C max operating temp, and I2C interface. Ideal for photoelectric applications, it has a compact square body measuring 2mm x 2 inch x 0.65 mm for surface mount installation.
Median Price
$4.020
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$3.189
100+ parts
$2.803
1k+ parts
$2.582
10k+ parts
-
Chip1Stop
$3.170
DigiKey
$4.900
$3.693
$3.411
Element14
$4.490
$4.150
Verical
Farnell
$2.520
$2.330
Nova Conductors
$2.420
Digiode
$3.030
Sensible Micro Corp
Cyclops Electronics Ltd
Bristol Electronics
Vyrian
TME
$4.780
Sea View Technologies
J2 Sourcing AB
North Shore Components
NexGen Digital
Aztec Data Supply Inc.
$1.673
Bastille Electronics
$2.299
$2.184
$2.154
Argo Parts USA
Continental Prestige Electronics
$2.372
Ampacity Inc.
$2.710
Corphita
$2.870
Corohmni
$2.970
Kepictronics
Perfect Parts
RC Electronics
$3.300
$3.020
$2.930
GreenTree Electronics
Futuretech Components
Allows for a wide range of compatible power sources, increasing flexibility in application
Provides a larger surface area for sensing, enhancing accuracy and range
Combination of proximity sensor and photoelectric technology offers precise and reliable detection capabilities
Low profile design allows for discreet installation in tight spaces
Square shape offers efficient use of space and easy integration into various systems
Low minimum supply voltage helps in reducing power consumption and extending battery life
Wide operating temperature range enables use in various environmental conditions
Analog voltage output provides continuous and smooth data for accurate sensing
Capable of operating in extremely low temperatures, suitable for outdoor or industrial applications
Low operating current consumption for energy-efficient operation
Compact size for easy installation and integration into various setups
Solder termination ensures secure connections for reliable performance
I2C interface allows for easy communication with other devices or microcontrollers
Surface mount option simplifies installation on PCBs or flat surfaces
Proximity Sensors SI1141-A11-GMR attributes and parameters. Explore more Proximity Sensors devices from Silicon Labs
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Output Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
PCN Design/Specification - Si1141/42/43 02/Mar/2021
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Hy Electronic
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Pulse Electronics
Changzhou Galaxy Century Microelectronics
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Meritek Electronics
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
APDS-9960
Broadcom
Broadcom's APDS-9960 is a proximity sensor with 2.4V to 3.6V supply voltage range, I2C interface, and digital voltage output. Ideal for applications requiring photoelectric proximity sensing in compact spaces due to its small body dimensions of 3.94mm x 2.36in x 1.35mm and surface mounting feature.
EX-23-PN
The Panasonic EX-23-PN is a PNP Proximity Sensor with 26.4V max supply voltage, 500us response time, and 2000mm max measurement range. Ideal for detecting objects within a range of 0-2000mm in industrial automation applications due to its rectangular shape and PET housing.
59135-1-U-04-D
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 3.43 mm; Output Interface Type: 2-WIRE INTERFACE; Maximum Operating Temperature: 150 Cel;
59065-3-U-03-A
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 250 mA; Output Interface Type: 2-WIRE INTERFACE; Termination Type: CABLE; Body Height: 38.1 mm;
ZS-00417-02
Honeywell Sensing And Control
Honeywell ZS-00417-02 inductive proximity sensor operates b/w -55°C to 85°C with a supply voltage range of 14V to 32.5V. Housed in stainless steel, it has a measurement range of 1mm to 1.99mm and uses a 3-wire interface connector. Ideal for industrial automation applications requiring precise object detection in harsh environments.
XUB2AKSNM12T
Schneider Electric Sa
PROXIMITY SENSOR,PHOTOELECTRIC;
59060-3-U-05-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Termination Type: CABLE; Response Time: 3000 us; Body Height: 36 mm; Output Interface Type: 2-WIRE INTERFACE;
IR06.P02F-11117730
Baumer Electric Ag
Baumer Electric Ag's IR06.P02F-11117730 inductive proximity sensor has a 36V max supply voltage, 5V min supply voltage, and 75°C max operating temp. Ideal for applications requiring precise detection within a 2mm range, this stainless steel sensor features a cylindrical design with a 46mm body height and outputs an analog current up to 200mA via a 3-wire interface connector.
PRT12-4DC
Autonics
Autonics PRT12-4DC is a 2-WIRE DC inductive proximity sensor with a measurement range of 0-4.4mm. Operating b/w -25°C to 70°C, it has a cylindrical body measuring 12mm diameter and 31.5mm height. Ideal for applications requiring non-contact detection within a max supply voltage of 30V.
59135-1-U-01-E
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: 2-WIRE INTERFACE; Maximum Operating Current: 500 mA; Maximum Operating Temperature: 150 Cel;
59065-3-T-05-D
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Body Height: 38.1 mm; Output Interface Type: 2-WIRE INTERFACE;
E2B-S08LS02-MC-B1
Omron
Omron E2B-S08LS02-MC-B1 is an inductive proximity sensor with PNP, NO output. It operates b/w -25°C to 70°C and has a measurement range of 0-2mm. With stainless steel housing, it's ideal for industrial automation applications requiring precise object detection.
GO10-SME/SP3
Lem International Sa
PROXIMITY SENSOR,EDDY CURRENT;
59060-1-S-02-A
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Response Time: 1000 us; Output Interface Type: 2-WIRE INTERFACE; Body Height: 36 mm;
MK06-8-B
Standex-meder Electronics
MK06-8-B by Standex-Meder Electronics is a proximity sensor with a body width of 3.3" and height of 4.2mm, suitable for applications requiring photoelectric sensing. It operates b/w -20°C to 85°C, housed in PBT glass fiber reinforced material with solder termination and through-hole mounting feature.
STM8T143AMXXXY
STM8T143AMXXXY by STMicroelectronics is a capacitive proximity sensor with a voltage output range of 0.07-3.40V and response time of 850000 us. It operates b/w -40 to 85 °C, suitable for surface mount applications in various industries like automotive and consumer electronics.
NBB5-18GM50-E2
Pepperl+fuchs
Pepperl+fuchs NBB5-18GM50-E2 is an inductive proximity sensor with 36V max supply voltage, PNP output, and 55.9mm body height. Ideal for industrial automation applications requiring precise detection within a 4.05mm range at temperatures from -40 to 85°C.
59060-1-S-02-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE; Body Height: 36 mm; Response Time: 1000 us;
SI1145-M01-GMR
Silicon Labs
SI1145-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, -40 to 85°C operating temperature, and 10-500mm measurement range. Ideal for photoelectric applications, it features I2C interface and surface mounting for easy integration in various devices.
H1612-013
NXP Semiconductors
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Additional Features: TTL COMPATIBLE; Body Length/Diameter: 1 mm; Body Height: 3.37 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI1133-AA00-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Width: 2.85 inch; Termination Type: SOLDER;
SI1142-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Interface Type: I2C INTERFACE; Termination Type: SOLDER;
SI1141-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Height: 1.2 mm; Body Width: 2.85 inch;
SI1143-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Operating Current: 5.5 mA; Minimum Supply Voltage: 1.71 V;
SI1141-A10-GM
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Minimum Supply Voltage: 1.8 V; Body Width: 2 inch; Output Interface Type: I2C INTERFACE;
SI1142-A10-GM
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Additional Features: UNSHIELDED; Minimum Supply Voltage: 1.8 V; Minimum Operating Temperature: -40 Cel;
SI1143-A10-GM
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Body Height: .65 mm; Maximum Operating Temperature: 85 Cel; Body Length/Diameter: 2 mm;
SI1141-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Output Interface Type: I2C INTERFACE;
SI1142-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Body Width: 2 inch;
SI1143-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Minimum Supply Voltage: 1.71 V; Minimum Operating Temperature: -40 Cel;
SI1141-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Body Width: 2 inch; Maximum Operating Current: 5.5 mA;
SI1142-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Width: 2 inch; Output Interface Type: I2C INTERFACE;
SI1143-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Additional Features: AEC-Q100; Maximum Operating Current: 5.5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved