Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI1143-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, I2C interface, and -40 to 85°C operating temperature. Ideal for photoelectric applications, it features a compact rectangular design suitable for surface mount installations.
Median Price
$5.250
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$5.524
Digiode
$8.113
Vyrian
Ampacity Inc.
$7.260
Corphita
$7.686
Lixinc
Kepictronics
Assy Fe
RC Electronics
Authorized Procurement Solutions
Futuretech Components
The higher maximum supply voltage allows for versatility in power supply options, making it suitable for a variety of applications.
The wide body width provides stability and robustness to the proximity sensor, ensuring durability and reliability in operation.
The combination of proximity sensor and photoelectric transducer types offers dual functionality, making the sensor suitable for different detection requirements.
The low body height allows for easy integration into compact spaces without compromising the sensor's performance.
The rectangular package shape provides a standardized form factor for easy installation and compatibility with existing setups.
The lower minimum supply voltage ensures energy efficiency and extends the sensor's battery life in applications requiring low power consumption.
The high maximum operating temperature range allows the sensor to withstand harsh environmental conditions, making it suitable for industrial applications.
The wide operating temperature range ensures the sensor's performance in extreme cold conditions, making it suitable for a variety of environments.
The compact body length/diameter provides a small footprint, enabling easy integration and installation in tight spaces.
The solder termination type ensures a secure and reliable electrical connection, making the sensor suitable for rugged applications that require stable connections.
The I2C interface type offers a standardized communication protocol for easy integration with other devices, enhancing the sensor's versatility and compatibility.
The surface mounting feature offers easy and secure attachment to PCBs or other surfaces, making the sensor suitable for automated assembly processes.
Proximity Sensors SI1143-M01-GMR attributes and parameters. Explore more Proximity Sensors devices from Silicon Labs
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
1554216002
Molex
WIRE AND CABLE;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
4AV11C
Micro Switch
PROXIMITY SENSOR,HALL EFFECT;
CA30CAN25PAM1
Carlo Gavazzi Holding Ag
PROXIMITY SENSOR,CAPACITIVE;
59060-1-T-03-A
Littelfuse
Littelfuse 59060-1-T-03-A is a magnetic proximity sensor with stainless steel housing. It operates b/w -40°C to 105°C, with response time of 1000 us. Ideal for industrial automation applications requiring reliable detection in harsh environments.
59030-01-U-02-F
PROXIMITY SENSOR,PHOTOELECTRIC;
9212661054
Standex-meder Electronics
The Standex-Meder Electronics 9212661054 is a proximity sensor with a body width of 19" and height of 6.25mm. It operates b/w -30°C to 70°C, housed in polyester material. This rectangular sensor features a wire termination type and 1-wire interface, suitable for various photoelectric applications.
E2E-C06S02-WC-B12M
Omron
Omron E2E-C06S02-WC-B12M is an inductive proximity sensor with 10-30V supply voltage, NPN output type, and 2mm measurement range. Ideal for panel mounting applications, it operates b/w -25°C to 70°C temperatures. With a cylindrical body of 6.5mm diameter and 36mm height, it offers a reliable 3-wire interface for industrial automation needs.
BI1-EG04-AP6X
Hans Turck & Kg
BI1-EG04-AP6X by Hans Turck & KG is an inductive proximity sensor with PNP output, 10-30V supply voltage range, and stainless steel housing. Ideal for applications requiring a 3-wire interface, flush mounting, and operating temperatures from -25°C to 70°C.
59065-1-S-02-A
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Response Time: 1000 us; Output Interface Type: 2-WIRE INTERFACE; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 8 mm;
59022-4-S-02-A
Littelfuse 59022-4-S-02-A is a magnetic proximity sensor with a body height of 25.4mm and cylindrical package style. It operates b/w -40°C to 105°C, making it suitable for industrial automation applications requiring reliable sensing in harsh environments.
59630-1-T-02-D
PROXIMITY SENSOR,MAGNETIC; Package Shape or Style: ROUND; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 23.7 mm; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE;
MK03-1A66C-500W
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -20 Cel; Housing: PBT GLASS FIBRE REINFORCED; Termination Type: CABLE; Output Interface Type: 1-WIRE INTERFACE;
E3JM-10M4-NN-US
Omron E3JM-10M4-NN-US is a photoelectric proximity sensor with 264V supply voltage, 25" body width, and 65mm height. It operates b/w -25°C to 55°C, has a response time of 30,000us, and uses relay output. Ideal for board mounting applications with a measurement range from 0mm to 10,000mm.
59075-3-U-04-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 85 Cel; Termination Type: CABLE; Body Height: 46 mm; Minimum Operating Temperature: -40 Cel;
59065-1-S-01-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Response Time: 1000 us; Termination Type: CABLE; Maximum Operating Temperature: 105 Cel; Maximum Operating Current: 500 mA;
59070-4-U-01-D
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Height: 38.1 mm; Maximum Operating Temperature: 105 Cel; Response Time: 3000 us; Output Interface Type: 2-WIRE INTERFACE;
ZS-00370-02
Honeywell Sensing And Control
Honeywell ZS-00370-02 inductive proximity sensor operates b/w -55°C to 85°C with a supply voltage range of 14V to 32.5V. Featuring a stainless steel housing, it has a measurement range of 2mm to 2.99mm and uses a 3-wire interface connector. Ideal for applications requiring precise detection in harsh environments.
59145-1-S-02-A
Littelfuse 59145-1-S-02-A is a rectangular proximity sensor with dimensions of 28.57mm x 19.05in x 6.35mm, operating b/w -40°C to 105°C. It features a response time of 1000us and uses a 2-wire interface for applications requiring precise object detection in industrial settings.
H1612-014
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Maximum Operating Current: 50 mA; Body Height: 4.62 mm; Minimum Measurement Range (mm): .12 mm;
E2E-X2E1-M1
Omron's E2E-X2E1-M1 is an inductive proximity sensor with a 12mm cylindrical brass body. It operates b/w -40°C to 85°C, with a supply voltage range of 12-24V. Output type is analog current at 200mA, making it ideal for precise 2mm measurement applications.
ZS-00305-01
Honeywell ZS-00305-01 inductive proximity sensor operates b/w -40°C to 100°C with a supply voltage range of 18V to 33V. Featuring a stainless steel housing, it has a measurement range from 3mm to 3.99mm. Ideal for industrial automation applications requiring precise object detection and positioning accuracy.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI1145-M01-GMR
Silicon Labs
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Width: 2.85 inch; Termination Type: SOLDER;
SI1133-AA00-GMR
SI1142-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Height: 1.2 mm; Output Interface Type: I2C INTERFACE;
SI1146-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 2.85 inch; Body Length/Diameter: 4.9 mm; Minimum Supply Voltage: 1.71 V;
SI1147-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Length/Diameter: 4.9 mm; Minimum Measurement Range (mm): 10 mm;
SI1142-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Interface Type: I2C INTERFACE; Termination Type: SOLDER;
SI1141-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Maximum Operating Current: 5.5 mA;
SI1141-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Height: 1.2 mm; Body Width: 2.85 inch;
SI1143-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Operating Current: 5.5 mA; Minimum Supply Voltage: 1.71 V;
SI1141-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Output Interface Type: I2C INTERFACE;
SI1142-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Height: .65 mm; Body Width: 2 inch;
SI1143-A10-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Minimum Supply Voltage: 1.71 V; Minimum Operating Temperature: -40 Cel;
SI1141-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Body Width: 2 inch; Maximum Operating Current: 5.5 mA;
SI1142-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: SQUARE; Body Width: 2 inch; Output Interface Type: I2C INTERFACE;
SI1143-A11-YM0R
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Additional Features: AEC-Q100; Maximum Operating Current: 5.5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved