Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI1146-M01-GMR by Silicon Labs is a proximity sensor with 1.71-3.6V supply voltage range, I2C interface, and 10-500mm measurement range. Ideal for surface mount applications in various industries due to its compact size (4.9x2.85x1.2mm) and photoelectric sensor type capabilities. Operating temperature ranges from -40 to 85°C make it suitable for diverse environmental conditions.
Median Price
$4.860
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$3.662
1k+ parts
-
10k+ parts
Arrow
Verical
Nova Conductors
$3.119
Digiode
$3.980
Bristol Electronics
$4.842
$2.276
$2.082
Vyrian
Dan-Mar Components
Netroflash
Ampacity Inc.
$3.560
Corphita
$3.771
Allows for a higher maximum power input, providing flexibility and compatibility with a wide range of systems.
Offers a compact and slim design, making it easier to integrate into various applications without taking up much space.
Utilizes both proximity sensor and photoelectric technology for accurate and reliable detection in different environments.
Can withstand high temperatures, making it suitable for use in industrial applications where temperature fluctuation may occur.
Features an I2C interface for easy communication with other devices, enhancing connectivity and data transfer capabilities.
Proximity Sensors SI1146-M01-GMR attributes and parameters. Explore more Proximity Sensors devices from Silicon Labs
Body Width:
Body Height:
Body Length/Diameter:
JESD-609 Code:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
PCN Obsolescence/ EOL - Si1132/Si114x 31/Mar/2020
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
59145-1-T-02-A
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 28.57 mm;
STM8T143AU62T
STM8T143AU62T by STMicroelectronics is a capacitive proximity sensor with a voltage output range of 0.07-4.9V and response time of 850000 us. It operates b/w -40 to 85 °C, suitable for surface mount applications in various industries like automotive and consumer electronics.
E2E-X7D112-TR2M
Omron
PROXIMITY SENSOR,INDUCTIVE;
MK04-1A66B-500W
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: PANEL MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 13.9 inch; Termination Type: WIRE; Maximum Operating Temperature: 70 Cel;
BI5U-EM18M-VP4X-H1141
Hans Turck & Kg
BI5U-EM18M-VP4X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output type. It operates b/w -30 to 85°C, with a max supply voltage of 65V and current of 200mA. Ideal for applications requiring stainless steel housing, flush mounting, and a 4-wire interface.
59065-3-T-04-C
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Height: 38.1 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 8 mm;
E57-08GS01-GDB
Omega Engineering
59135-1-U-03-D
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Body Height: 3.43 mm; Body Width: 19.05 inch;
E2A-M12LS04-M1-B1
Omron E2A-M12LS04-M1-B1 is an inductive proximity sensor with PNP output, 10-32V supply voltage range, and 4mm measurement range. Ideal for industrial automation applications requiring non-contact sensing in harsh environments.
E2E-C06S02-WC-B12M
Omron E2E-C06S02-WC-B12M is an inductive proximity sensor with 10-30V supply voltage, NPN output type, and 2mm measurement range. Ideal for panel mounting applications, it operates b/w -25°C to 70°C temperatures. With a cylindrical body of 6.5mm diameter and 36mm height, it offers a reliable 3-wire interface for industrial automation needs.
MK23-35-D-2
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 10.5 mm; Termination Type: SOLDER; Maximum Operating Temperature: 130 Cel;
BI5-M18E-VP4X-H1141
BI5-M18E-VP4X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output, 10-65V supply voltage range, and -25 to 70°C operating temperature. Ideal for flush mounting applications, this metal-housed sensor has a barrel shape and uses a 4-wire interface for easy connectivity.
MK17-C-1
Standex-meder Electronics
MK17-C-1 by Standex-Meder Electronics is a proximity sensor with dimensions of 2.1" x 2.1mm x 8.5mm, operating b/w -40°C to 130°C. It has a response time of 100us and features an epoxy resin housing for surface mount applications.
MK05-1A66B-500W
MK05-1A66B-500W by Standex-Meder Electronics is a proximity sensor with 180V max supply voltage, 1250mA max operating current, and -30 to 70°C operating temperature range. Ideal for panel mounting applications, this rectangular sensor features a PBT glass fiber reinforced housing and wire termination.
59060-2-V-03-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Response Time: 1000 us; Maximum Operating Temperature: 105 Cel; Body Height: 36 mm; Termination Type: CABLE;
E2A-M08KS02-M1-B1
Omron's E2A-M08KS02-M1-B1 is a 27mm high inductive proximity sensor with a cylindrical shape. It operates at temperatures ranging from -40 to 70 °C and has a max supply voltage of 32V. With PNP, NO output type, it is commonly used for detecting objects within a 2mm measurement range.
A1301KUA-T
Allegro MicroSystems
Allegro MicroSystems' A1301KUA-T is a proximity sensor with 3 terminals, operating voltage range of 4.5-6V, and output voltage range of 2.40-2.60V. Ideal for applications requiring digital voltage output, such as position sensing in automotive or industrial environments due to its Hall effect technology and CMOS design.
MK23-80-B-2
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel; Response Time: 100 us;
MK21P-1A66C-500W
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: PANEL MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 19 inch; Minimum Operating Temperature: -30 Cel; Housing: CRASTIN SK655FR1;
VCNL36687S
Vishay Intertechnology
PROXIMITY SENSOR,PHOTOELECTRIC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI1145-M01-GMR
Silicon Labs
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Width: 2.85 inch; Termination Type: SOLDER;
SI1133-AA00-GMR
SI1142-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Height: 1.2 mm; Output Interface Type: I2C INTERFACE;
SI1143-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 4.9 mm; Body Height: 1.2 mm;
SI1147-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Length/Diameter: 4.9 mm; Minimum Measurement Range (mm): 10 mm;
SI1142-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Interface Type: I2C INTERFACE; Termination Type: SOLDER;
SI1141-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.6 V; Maximum Operating Current: 5.5 mA;
SI1141-M01-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: I2C INTERFACE; Body Height: 1.2 mm; Body Width: 2.85 inch;
SI1143-A11-GMR
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Maximum Operating Current: 5.5 mA; Minimum Supply Voltage: 1.71 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved