Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Conversion Loss: 7.5 dB;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Odintec Ltd.
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Nova Conductors
Modulus Dynamics
$2.305
$2.213
$2.121
AZTECH Wire
$10.575
Ampacity Inc.
$15.000
Kepictronics
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Assy Fe
Corphita
Aranea Global
RF/Microwave Mixers CMY211 attributes and parameters. Explore more RF/Microwave Mixers devices from Siemens
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Micro Commercial Components
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Formosa Microsemi
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
AMMC-3040-W50
Broadcom
DOUBLE BALANCED; Power Supplies (V): 2/5; Maximum Conversion Loss: 12 dB; Package Equivalence Code: DIE OR CHIP; Construction: COMPONENT; Maximum Operating Frequency: 36000 MHz;
LTC5562IUC#PBF
Analog Devices
LTC5562IUC#PBF by Analog Devices is a RF/Microwave Mixer with 10 terminals, operating from -40 to 105 °C. It has a max input power of 15 dBm and operates in the frequency range of 0-9000 MHz. This component is ideal for applications requiring double balanced RF or microwave devices with a characteristic impedance of 50 ohms.
HMC1041LC4TR
Analog Devices' HMC1041LC4TR is a GAAS technology RF/Microwave Mixer with 24 terminals. It operates b/w -40 °C to 85°C, featuring an IMAGE REJECTION type for surface mount applications. The package body material is CERAMIC, making it suitable for various RF and microwave circuit designs.
HMC260ALC3BTR
Analog Devices' HMC260ALC3BTR is a RF/Microwave Mixer with GaAs technology, 50 ohm impedance, and 12 dB conversion loss. It operates from 10 to 26 GHz, handles up to 27 dBm CW power, and draws a max of 3 mA supply current. Ideal for high-frequency applications requiring double balanced mixers in surface mount packages.
HMC688LP4ERTR
Analog Devices' HMC688LP4ERTR is a BICMOS RF/Microwave Mixer with 24 terminals, operating at -40 to 85°C. It requires a 5V power supply, drawing a max current of 168mA. Ideal for surface mount applications in various electronic systems.
HMC521ALC4TR-R5
Analog Devices' HMC521ALC4TR-R5 is an RF/Microwave Mixer with 20 dBm CW input power, 9.5 dB conversion loss, and 50 ohm impedance. It operates b/w -40°C to 85°C, suitable for applications requiring image rejection in the frequency range of 8.5-13.5 GHz.
HMC665LP4ERTR
Analog Devices' HMC665LP4ERTR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It requires a 5V power supply, drawing a max of 200mA. This surface-mount device is ideal for high-frequency applications in various industries.
TA4101F
Toshiba
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP8,.16;
MAX9995ETX+TD
MAX9995ETX+TD by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, 1.5 VSWR, and 5V supply. It operates from -40 to 85 °C, has BICMOS tech, and consumes 110mA max current. Ideal for applications requiring double balanced mixers in the frequency range of 1700-2200 MHz.
CMY211
Siemens
NE602AD
NXP Semiconductors
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: 0 Cel;
SA602AD/01-T
SA602AD/01-T by NXP Semiconductors is a RF/Microwave Mixer with 8 terminals, operating at -40 to 85°C. It requires 6V power supply, draws max 2.8mA current, and uses bipolar technology. The package body material is plastic/epoxy with nickel/palladium/gold/silver terminal finish, suitable for surface mount applications.
HMC528LC4RTR
Analog Devices' HMC528LC4RTR is a GAAS RF/Microwave Mixer with 24 terminals in a ceramic package. It operates b/w -40°C to 85°C, suitable for surface mount applications. Ideal for high-frequency signal processing in communication systems.
HMC553LC3BTR
Analog Devices' HMC553LC3BTR is a RF/Microwave Mixer with 10 dB max conversion loss, operating from 7-14 GHz. It has a max input power of 25 dBm and operates in temperatures ranging from -40 to 85 °C. Ideal for applications requiring double balanced components in the 50 ohm impedance range.
TUF-3HSM
Mini-circuits
The Mini-circuits TUF-3HSM RF/Microwave Mixer features a max input power of 23 dBm, VSWR of 2.22, and double balanced construction. With a max conversion loss of 8 dB, it operates from 0.15 MHz to 400 MHz. Ideal for applications requiring high-performance mixing in RF and microwave systems.
HMC214MS8ETR
Analog Devices' HMC214MS8ETR is a GAAS RF/Microwave Mixer with 8 terminals, operating from 2400-4000 MHz. It offers a max input power of 27 dBm and conversion loss of 12 dB. Ideal for applications requiring double balanced mixers in the temperature range of -40 to 85 °C.
ADL5355ACPZ-WP
ADL5355ACPZ-WP by Analog Devices is a RF/Microwave Mixer with 20dBm CW input power, operating from -40 °C to 85°C. It features BICMOS tech, double balanced design, and operates b/w 1200-2500MHz. Ideal for applications requiring high-frequency mixing in compact designs.
HMC8191
The Analog Devices HMC8191 is a RF/Microwave Mixer with 7 terminals, operating from 6-26.5 GHz. It offers high image rejection, low conversion loss of 11 dB, and can handle up to 24 dBm CW input power. Ideal for applications requiring surface mount construction in temperature range -40 to +85 °C.
LMX2216MX
Texas Instruments
LMX2216MX by Texas Instruments is a double balanced RF/Microwave Mixer with 50 ohm impedance. It operates b/w -10°C to 70°C, covering frequencies from 100 MHz to 2000 MHz. Ideal for applications requiring high frequency mixing in various electronic systems.
HMC412BMS8GE
Analog Devices' HMC412BMS8GE is a RF/Microwave Mixer with 24 dBm CW input power, 50 ohm impedance, and 9.4 dB max conversion loss. Ideal for applications requiring triple balanced operation in the frequency range of 9-15 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CMY210
Qorvo
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 500 MHz; Maximum Operating Frequency: 2500 MHz;
Infineon Technologies
Infineon Technologies' CMY210 is a GAAS RF/Microwave Mixer with 17 dBm CW input power, 7 dB conversion loss, and 500-2500 MHz frequency range. Featuring a double balanced design, it's ideal for surface mount applications requiring high-frequency signal mixing in a 50 ohm system.
Triquint Semiconductor
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 8 mA; JESD-609 Code: e3/e4;
DOUBLE BALANCED; Maximum Input Power (CW): 10 dBm; Minimum Operating Frequency: 500 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT;
CMY210E6327
DOUBLE BALANCED; Minimum Operating Frequency: 500 MHz; Construction: COMPONENT; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 10 dBm; Characteristic Impedance: 50 ohm;
DOUBLE BALANCED; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 10 dBm; Minimum Operating Frequency: 500 MHz;
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 10 dBm; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT;
DOUBLE BALANCED; Minimum Operating Frequency: 500 MHz; Construction: COMPONENT; Maximum Input Power (CW): 10 dBm; Maximum Operating Frequency: 2500 MHz; Characteristic Impedance: 50 ohm;
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
CMY210E6433
DOUBLE BALANCED; Maximum Input Power (CW): 10 dBm; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT; Minimum Operating Frequency: 500 MHz;
CMY211E6327
DOUBLE BALANCED; Maximum Operating Frequency: 2500 MHz; Minimum Operating Frequency: 500 MHz; Construction: COMPONENT; Characteristic Impedance: 50 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved