Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
Median Price
$3.420
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
$2.751
1k+ parts
10k+ parts
Verical
$4.088
$3.762
$3.679
Digiode
$3.667
Maritex
$4.380
$2.431
$1.878
$1.600
TME
$5.060
$2.740
$2.120
$2.050
VNN
Cyclops Electronics Ltd
Vyrian
Bristol Electronics
Atlantic Semiconductor
Quantum Digital Technology
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
A&K Electronics
Rotakorn
ACDS - Activité Composants Distribution Service
North Shore Components
Tectiva GmbH
Nova Conductors
Ampacity Inc.
Semicontronic
$2.067
$2.056
CoreStaff
$2.700
$1.784
$1.777
Corphita
$3.474
Corohmni
$7.495
Modulus Dynamics
$8.297
$7.965
$7.633
Advanced Electronics
$8.789
$8.350
Metaverse IC Inc.
Perfect Parts
A-Z Elektronik GmbH
Lixinc
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
Authorized Procurement Solutions
GreenTree Electronics
Kepictronics
Alle Elektronik GmbH
Argo Parts USA
Futuretech Components
Bastille Electronics
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Peripheral Drivers BTS428L2 attributes and parameters. Explore more Peripheral Drivers devices from Siemens
Built-in Protections:
Interface IC Type:
JESD-30 Code:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Position:
Turn-off Time:
Turn-on Time:
BTS428L2 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
1554216004
WIRE AND CABLE;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Transys Electronics
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Diotec Electronics
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803AN
Taejin Technology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
NCV8460ADR2G
NCV8460ADR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 6V to 36V and has a nominal output peak current limit of 9A. This buffer or inverter based driver is commonly used in automotive applications due to its AEC-Q100 screening level.
IRS21844MTRPBF
Infineon Technologies
IRS21844MTRPBF by Infineon is a peripheral driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temp. Ideal for automotive applications, it features built-in transient protection, 0.9us turn-on time, and 2.3A output current limit for half-bridge based systems.
MAX4820EUP+
Analog Devices
MAX4820EUP+ by Analog Devices is an 8-bit peripheral driver with a supply voltage range of 2.3V to 5.5V, operating temperature from -40°C to 85°C, and turn-on/off time of 1µs. It features open-drain output characteristics and is ideal for industrial applications requiring buffer or inverter-based peripheral drivers in a compact small outline package.
AUIPS6041GTR
AUIPS6041GTR by Infineon is a peripheral driver with 28V max supply voltage, built-in transient and over current protections. It has 8 terminals, sink output current flow direction, and turn-on time of 15us. Ideal for automotive applications requiring buffer or inverter based peripheral drivers meeting AEC-Q100 standards.
FSFR2100XSL
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; No. of Functions: 1; Terminal Finish: MATTE TIN;
BTS452RATMA1
BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.
ULN2003F12FN-7
Diodes Incorporated
Diodes Inc. ULN2003F12FN-7 is a 7-bit buffer/inverter peripheral driver with open-collector output, suitable for automotive applications. It operates b/w -40°C to 125°C, supports a supply voltage of 20V, and has a turn-on time of 0.14us. The package is small outline with very thin profile and surface-mountable, making it ideal for space-constrained designs.
FAN7390AMX1
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
ITS724GXT
ITS724GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating voltage range of 5.5V to 40V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. This small outline package IC is ideal for applications requiring sink output current flow direction and interface buffer or inverter based peripheral driver type.
HCPL-316J#500
Broadcom
HCPL-316J#500 by Broadcom is a Peripheral Driver with 16 terminals, operating voltage range of 4.5V to 5.5V, and built-in protections against over/under voltage. It features a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 2.5A and sink flow direction.
PTPS274160BRLHR
Texas Instruments
PTPS274160BRLHR by Texas Instruments is a 28-terminal peripheral driver with 4 functions, operating at a supply voltage range of 5-40V. With built-in protections against transient, over current, thermal, and under voltage issues, this chip carrier is ideal for automotive applications requiring high reliability and performance. It features a turn-on/off time of 150us and can handle an output current flow direction of sink.
TPS22810DRVR
TPS22810DRVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V. It offers built-in protections for transient, thermal, and under voltage conditions. Ideal for industrial applications requiring a compact (0.8mm seated height) and high output current (2A) solution.
MCZ33996EKR2
MCZ33996EKR2 by NXP Semiconductors is a SIPO-based peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 5V to 27V and has a max output current of 1.2A. Widely used in automotive applications due to its small outline package style and sink output current flow direction.
BTS50452EKAXUMA1
BTS50452EKAXUMA1 by Infineon is a 14-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a nominal voltage of 13.5V and has a max supply voltage of 28V. With turn-on/off time of 230us, it is ideal for applications requiring buffer or inverter based peripheral drivers.
ITS41K0SMENHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;
VNQ5E160KTR-E
STMicroelectronics
STMicroelectronics' VNQ5E160KTR-E is a full bridge peripheral driver with 4 bits. It has built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 28V, it's ideal for applications requiring high power supplies and source output current flow direction.
DRV103HG3
DRV103HG3 by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 8V to 24V and has a max output peak current limit of 3.5A. This NMOS technology-based driver is ideal for applications requiring buffer or inverter based peripheral drivers in military-grade temperature environments.
AP2171WG-7
AP2171WG-7 by Diodes Inc. is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage conditions. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 1A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
IR2085STRPBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTS4141NHUMA1
BTS4141NHUMA1 by Infineon is a peripheral driver with 4 terminals, operating voltage range of 12-45V, and built-in protections. Widely used in automotive applications due to its small outline package style and sink output current flow direction. Turn-on time is 100 us and turn-off time is 150 us for efficient performance.
BTS4175SGAXUMA1
BTS4175SGAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a turn-on time of 180 us. Ideal for applications requiring a small outline package style and sink output current flow direction.
BTS428L2ATMA1
BTS428L2ATMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V with a max of 41V. With a turn-on/off time of 200us, it's ideal for applications requiring a sink output current flow direction in small outline packages.
BTS443PAUMA1
BTS443PAUMA1 by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output current limit, and 410us turn-on/off time. It's used in applications requiring sink output flow direction, such as automotive systems for transient, overcurrent, overvoltage protection.
BTS4141NNT
BTS4141NNT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 45 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
BTS4141NXT
BTS4141NXT by Infineon is a MOS technology peripheral driver with 4 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage. Widely used in automotive applications due to its small outline package and sink output current flow direction.
BTS4141N
BTS4141N by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 12V to 24V and has a max supply voltage of 45V. With a small outline package style suitable for automotive applications, it offers a nominal output peak current limit of 1.8A.
BTS432E2BKSA1
BTS432E2BKSA1 by Infineon is a MOS peripheral driver with 5 terminals and built-in protections. It operates at supply voltages b/w 4.5V to 42V, providing a nominal output peak current limit of 44A. This rectangular package is ideal for applications requiring buffer or inverter-based interface ICs with source current flow direction.
BTS432E2E3062AXT
BTS432E2E3062AXT by Infineon: MOS tech, 42V max supply, 44A peak current limit. Applicable as a buffer/inverter-based peripheral driver for various applications requiring source output flow direction control.
BTS452RXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-252; Package Shape: RECTANGULAR; Nominal Supply Voltage: 12 V;
BTS452TATMA1
BTS452TATMA1 by Infineon is a MOS technology peripheral driver with 4 terminals. It offers built-in protections for transient, over current, and over voltage situations. With a max supply voltage of 52V, it is ideal for applications requiring a nominal output peak current limit of 2.2A such as buffer or inverter based systems.
BTS432E2E3062A
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Package Style (Meter): SMALL OUTLINE;
BTS432E2E3062A by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based driver has a nominal output peak current limit of 44A and is commonly used as a buffer or inverter based peripheral driver.
BTS4880RAUMA1
BTS4880RAUMA1 by Infineon Technologies is a Peripheral Driver with 8 functions, operating at supply voltages b/w 11V to 45V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline driver has a turn-on time of 100us and turn-off time of 150us, making it suitable for various industrial applications requiring sink output current flow direction.
BTS432E2E3043
BTS432E2E3043 by Infineon is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates at supply voltages ranging from 4.5V to 42V, offering a nominal output peak current limit of 44A. This rectangular package is ideal for applications requiring source output current flow direction and fast turn-on/off times.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 44 A; Turn-off Time: 80 us;
BTS462TATMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: TO-252; Package Shape: RECTANGULAR; Terminal Pitch: 1.14 mm;
BTS4300SGAXUMA1
BTS4300SGAXUMA1 by Infineon: Peripheral driver with 8 terminals, max supply voltage of 34V. Used for sink output current flow direction applications. Offers built-in protections against transient, over/under voltage & thermal issues.
BTS4175SGA
BTS4175SGA by Infineon Technologies is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 6V to 13.5V and has a max supply voltage of 52V. This rectangular-shaped device is ideal for applications requiring a small outline package style and sink output current flow direction.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved