Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's RN114-1.2-02-10M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1.2A current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions: L22.5xB21.5xH13.2mm; Mounting: Through Hole Mount; ideal for noise suppression in electronic devices.
Median Price
$1.980
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.340
1k+ parts
$1.140
10k+ parts
$1.010
DigiKey
$1.337
$1.100
$1.018
TE Connectivity
$3.810
-
Master Electronics
$1.538
$1.143
$0.961
Verical
$1.950
$1.365
$1.269
Nova Conductors
$1.056
TME
$2.950
$1.740
Vyrian
Electro Sonic
$1.540
$1.050
Schukat
$1.158
IBS Electronics
$2.188
$1.627
$1.529
ComSIT Distribution GmbH
Inventory MP
Bristol Electronics
Perfect Parts
Having multiple approvals ensures that the product meets international safety standards and can be used in a variety of regions.
Suitable for use in mains applications with standard voltage levels.
Specifically designed to address electromagnetic interference in single-phase systems.
Can withstand high operating temperatures, ensuring reliability in demanding environments.
Capable of operating in cold temperatures without compromising performance.
Compact size allows for easy integration into various devices and systems.
Compatible with standard mains frequencies, ensuring effective EMI filtering.
Optimal length for efficient EMI filtering without taking up too much space.
Secure mounting method for stable installation in electronic equipment.
Compact dimensions make it versatile for various applications while still providing effective EMI filtering.
Can handle moderate current loads, making it suitable for various electronic devices.
Optimal height for efficient EMI filtering while maintaining a compact size.
EMI Mains Filters RN114-1.2-02-10M attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
1N4148WS
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Continental Device India
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
PLA10AN3630R3D2B
Murata Manufacturing
Murata Manufacturing's PLA10AN3630R3D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates b/w -25°C to 120°C, offering high insulation resistance of 100 Mohm. Ideal for EMI mains filtering applications due to its compact dimensions of L18.0xB16.0xH17.5 mm and through-hole mounting design.
FN2090-10-06
Schaffner Holding Ag
FN2090-10-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 11.2A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. Ideal for panel mounting applications with dimensions of L94.0xB56.0xH45.4mm.
SSHB21HS-10145
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
CMS2-7-R
Eaton Corporation
Eaton Corporation's CMS2-7-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.6A. Ideal for surface mount applications due to its compact dimensions of L8.89xB8.89xH6.0 mm and tape-and-reel packing method.
RN112-0.4-02-39M
Schaffner Holding Ag's RN112-0.4-02-39M is a UL, IEC, VDE approved EMI mains filter with 300V rated voltage and 0.4A current. Ideal for single-phase applications, it operates b/w -40°C to 100°C at 50/60Hz frequency. Dimensions: L17.7xB17.1xH12.6 mm, suitable for through-hole mounting.
RSHN-2016D
TDK
The TDK RSHN-2016D EMI Mains Filter is a single-phase filter with UL, CSA, and EN approvals. It has a rated voltage of 250V and rated current of 16A. With dimensions of L127.0xB52.0xH35.0 (mm), it is ideal for DIN rail mounting applications in environments with operating temperatures ranging from -25°C to 85°C.
810913020
Wuerth Elektronik & Kg
Wurth Elektronik's 810913020 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A current. It operates b/w -25°C to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
PLA10AN3030R4R2B
Murata Manufacturing's PLA10AN3030R4R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. Operating b/w -25 to 120 °C, it has a 0.4A rated current and dimensions of L18.0xB16.0xH17.5 mm. Ideal for EMI mains filtering applications with through-hole mounting requirement.
SC-05-50J
KEMET Corporation's SC-05-50J EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, suitable for single-phase applications with a rated current of 4A. Dimensions are L34.0xB23.0xH33.0mm, mounting type is through hole mount in tray packing method.
SN8D-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -25 Cel; Height: 13 mm; Diameter (mm): 17;
RSEL-2002WL
RSEL-2002WL by TDK is a 250V single-phase EMI filter with approvals from CSA, ENEC-14, and UL. It offers a rated current of 2A, max operating temperature of 85°C, and min insulation resistance of 100 Mohm. Ideal for panel mounting applications requiring effective mains filtering in the frequency range of 60Hz.
10511
Murrelektronik
10511 by Murrelektronik is a CE and EN approved EMI mains filter with a rated voltage of 440V. Featuring a three-phase filter type, it operates at temperatures ranging from -25°C to 85°C. With a rated current of 6A, this panel mount filter is ideal for industrial applications requiring high-potential protection.
CMS1-5-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
16BCF6R
TE Connectivity's 16BCF6R is a 480V, 16A THREE PHASE EMI Filter with max leakage current of 6.9mA. Ideal for panel mounting, it operates b/w -10°C to 40°C at 50Hz, providing effective EMI suppression in industrial applications.
FN2410-100-34
The Schaffner Holding Ag FN2410-100-34 is a UL, CSA, and ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V. It operates b/w -25°C to 100°C and has a max leakage current of 3.4mA. This DIN rail mount filter measures L140.0xB115.0xH100.0mm and is suitable for applications requiring up to 100A rated current at 400Hz frequency.
RSHN-2006L
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 52.0; High Pot: 2500 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
ESP-03-222
Cosel
Cosel ESP-03-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
FN2020-1-06
Schaffner Holding Ag's FN2020-1-06 is a UL, CSA, ENEC-14 approved 250V single-phase EMI filter with 100°C max temp and -25°C min temp. It operates at 50/60Hz frequency, has a rated current of 1.15A, and offers high pot protection up to 2000V. Ideal for chassis mount applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
FN2090B-20-08
Schaffner Holding Ag's FN2090B-20-08 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 22.4A rated current. Operating at -25 to 100°C, it offers high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications in various industries due to its compact dimensions of L94.0xB56.0xH45.4mm.
SC-030-E150JH-P
KEMET Corporation's SC-030-E150JH-P is a UL approved EMI mains filter with 250V rated voltage, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and has a diameter of 31mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN112-4-02-0M7
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; IEC; VDE; ENEC-10; Packing Method: TUBE; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Rated Voltage: 300 V;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Height: 12.6 mm; Maximum Operating Temperature: 100 Cel;
RN114-4-02-1M5
RN114-4-02-1M5 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A rated current. It operates b/w -40°C to 100°C temperatures and at 50/60Hz frequency. This single-phase filter is designed for through-hole mounting applications.
RN112-1.2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Operating Frequency (Hz): 50/60Hz;
RN112-0.5-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Rated Voltage: 300 V; Width (mm): 17.1; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Height: 12.6 mm;
RN114-1.5-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 21.5;
RN114-3-02-2M0
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Length: 22.5 mm; Approvals (V): UL; IEC; VDE; ENEC-10;
RN112-0.8-02-10M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Dimensions: L17.7XB17.1XH12.6 (mm)/L0.697XB0.673XH0.496 (inch); Length: 17.7 mm; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
RN112-0.5-02-18M
Schaffner Holding Ag's RN112-0.5-02-18M EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rated voltage and 0.5A current. Ideal for single-phase applications with operating temp range -40 to 100°C. Through-hole mount type filter with compact dimensions of L17.7xB17.1xH12.6mm suitable for 50/60Hz frequency use.
RN114-0.3-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch); Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10;
RN114-4-02
RN114-4-02 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. Approved by UL and VDE, it operates at -40 to 125 °C, suitable for applications requiring EMI mains filtering in a compact design.
RN112-0.5-02-15M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Approvals (V): UL; IEC; VDE; ENEC-10; Operating Frequency (Hz): 50/60Hz; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
RN114-1.2-02
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Approvals (V): UL; VDE; Length: 22.5 mm; Minimum Operating Temperature: -40 Cel; Width (mm): 21.5;
RN114-0.5-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Operating Temperature: -40 Cel; Length: 22.5 mm; Maximum Operating Temperature: 100 Cel; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch);
RN114-0.8-02-27M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Width (mm): 21.5; Approvals (V): UL; IEC; VDE; ENEC-10; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
RN114-1-02-15M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch); Width (mm): 21.5; Length: 22.5 mm; Operating Frequency (Hz): 50/60Hz;
RN114-2-02-4M2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Dimensions: L22.5XB21.5XH13.2 (mm)/L0.886XB0.846XH0.52 (inch); Mounting Type: THROUGH HOLE MOUNT; Width (mm): 21.5;
RN114-2.5-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Operating Frequency (Hz): 50/60Hz; Length: 22.5 mm; Approvals (V): UL; IEC; VDE; ENEC-10; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved