Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Schaffner Holding Ag FN2090-20-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 22.4A. It operates at temperatures from -25°C to 100°C, has dimensions of L94.0xB56.0xH45.4 (mm), and is ideal for panel mount applications requiring effective EMI filtering at 50/60Hz frequencies.
Median Price
$68.520
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS Americas
1+ parts
$44.120
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$55.230
Arrow
$61.460
$52.280
Sager
$66.590
$63.210
$56.900
Master Electronics
$47.310
$47.070
DigiKey
$76.390
$51.929
Newark
$84.650
$70.360
Verical
$95.928
TE Connectivity
$200.350
RS (Exports)
Nova Conductors
$49.610
Powertech Controls
$69.340
Schukat
$72.417
$53.880
Electro Sonic
$73.230
$54.430
$51.960
IBS Electronics
$87.769
$67.834
$65.668
Vyrian
Rutronik
NAC Semi
$68.500
Masline Electronics Inc.
Continental Prestige Electronics
$49.480
$48.490
Netroflash
$48.618
Neutron USA
$216.140
Kepictronics
Argo Parts USA
ChipstoGo Electronic ltd
GreenTree Electronics
Perfect Parts
Having approvals from UL, CSA, and ENEC-14 ensures that the product meets the necessary safety standards.
Suitable for use with standard voltage levels, making it compatible with most mains systems.
Specifically designed for filtering EMI interference in single-phase systems, providing effective noise reduction.
Capable of operating at high temperatures without compromising performance, ensuring reliability in various environments.
Can function effectively even in cold conditions, making it versatile for use in different climates.
Compact design allows for easy installation and integration into existing systems.
Covers common frequency ranges, making it suitable for use in most electrical systems.
Provides sufficient filtering capabilities while maintaining a manageable size for installation.
Can withstand high voltage levels, enhancing the safety and durability of the product.
Maintains low leakage current to prevent power loss and ensure efficient operation.
Easy to mount on panels for secure installation and accessibility during maintenance.
Compact dimensions make it suitable for various applications where space is limited.
Can handle high current loads without overheating or performance issues, suitable for demanding applications.
Maintains a low profile to fit in tight spaces and ensure compatibility with different setups.
EMI Mains Filters FN2090-20-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
PCN Packaging - Mult Devs - packing material chg 29/SEP/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Fairchild Semiconductor
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
1554216004
Molex
WIRE AND CABLE;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM358M
Raytheon Semiconductor
3-103-982
Schurter Ag
Schurter Ag's 3-103-982 EMI Mains Filter is CSA, EN, IEC, and UL approved with a rated voltage of 250V. It operates at temperatures from -40°C to 100°C and has a max leakage current of 0.005mA. This single-phase filter is panel-mounted and suitable for applications requiring effective EMI filtering in electrical systems.
B82722-A2102-N1
TDK
TDK's B82722-A2102-N1 is a 250V rated SINGLE PHASE EMI FILTER with 1A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. Ideal for EMI mains filtering applications due to its compact size and through-hole mounting type.
SU9VF-07015
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Length: 17 mm; Width (mm): 11; High Pot: 500 V; Height: 17 mm;
NAC-20-472
Cosel
The Cosel NAC-20-472 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 20A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it is ideal for chassis mount applications requiring high pot of 2500V and max leakage current of 1mA at temperatures ranging from -40 to 85°C.
6EHT3
TE Connectivity's 6EHT3 is a CSA, UL, VDE approved EMI mains filter with 250V rated voltage and 6A rated current. With single-phase filter type, it operates at -10 to 40°C temperatures and offers high pot of 2250V. Ideal for panel mounting applications due to its compact dimensions of L85.9xB54.6xH46 mm (L3.38xB2.15xH1.81 inch).
CMS1-10-R
Eaton Corporation
Eaton Corporation's CMS1-10-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.65A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
FIL-1S-1-3A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Width (mm): 27; Height: 99 mm;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
SS26V-R100330
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
RN112-0.5-02-27M
Schaffner Holding Ag
The Schaffner Holding Ag RN112-0.5-02-27M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and operating temperatures from -40°C to 100°C. Its dimensions are L17.7xB17.1xH12.6 mm, making it suitable for through-hole mounting applications in various electronic devices requiring effective EMI filtering at 50/60Hz frequencies up to 0.5A current rating.
LF-202U-1
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Leakage Current: 1 mA; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -20 Cel; Height: 25 mm;
SS11VL-R06270
KEMET Corporation
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
CMS2-1-R
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
10VK1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; High Pot: 2250 V; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 50/60Hz;
RC212-0.4-15M
The Schaffner Holding Ag RC212-0.4-15M EMI Mains Filter has 2 functions, rated at 250V with 4 terminals. With inductance of 15000uH and max temp of 125°C, it's ideal for data line filtering applications. Measuring 7.4mm in width and mountable through hole, it operates at a rated current of 0.4A.
SCF29XV-250-2R2A008JH
SINGLE PHASE EMI FILTER;
SSRH24NH-50041
KEMET Corporation's SSRH24NH-50041 is a UL approved EMI mains filter with 250V rated voltage and 5A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 25.5mm x 18mm. Ideal for single-phase EMI filtering applications.
TF3435VU-300Y15R0-1H
TF3435VU-300Y15R0-1H by TDK is a 280V UL/CSA/IEC approved EMI mains filter with 15A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting, its compact D33XL22mm size makes it suitable for various electronic applications.
CMS1-11-R
Eaton Corporation's CMS1-11-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.35A. Ideal for surface mount applications due to its compact L9.4xB7.2xH2.6mm size and tape and reel packing method.
EAC-10-102-D
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
FN2030-4-06
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Height: 22.3 mm; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2030-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; High Pot: 1100 V; Approvals (V): UL; CSA; ENEC-14; Maximum Leakage Current: .34 mA; Additional Features: INDUCTANCE 20 MILLIHENRY;
FN2020-16-06
SINGLE PHASE EMI FILTER; Rated Current: 18.4 A; Length: 50.5 mm; Dimensions: L50.5XB44.5XH29.3 (mm)/L1.988XB1.752XH1.154 (inch); Height: 29.3 mm; Rated Voltage: 250 V;
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
FN2020-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Maximum Leakage Current: .74 mA; Length: 43.5 mm; Operating Frequency (Hz): 50/60Hz; Additional Features: INDUCTANCE 2.5 MILLIHENRY;
FN2010-6-06
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; High Pot: 2000 V; Additional Features: INDUCTANCE 1 MILLIHENRY; Length: 43.5 mm; Maximum Leakage Current: .66 mA;
FN2030-20-06
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
FN2010-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Length: 43.5 mm; Height: 24.3 mm;
FN2070-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Height: 40.3 mm; Additional Features: INDUCTANCE 9.8 MILLIHENRY; Maximum Operating Temperature: 100 Cel; Length: 64.8 mm;
FN2020-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Maximum Operating Temperature: 100 Cel; High Pot: 2000 V; Height: 29.3 mm; Length: 43.5 mm;
FN2020B-20-06
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Maximum Operating Temperature: 100 Cel; Width (mm): 49.8; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz;
FN2010-12-06
SINGLE PHASE EMI FILTER; Rated Current: 13.8 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .74 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 2000 V;
FN2020-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Additional Features: INDUCTANCE 0.6 MILLIHENRY; Height: 30.3 mm; Approvals (V): UL; CSA; ENEC-14; Mounting Type: CHASSIS MOUNT;
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
FN2070-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CSA; ENEC-14;
FN2080-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Width (mm): 56.0; Dimensions: L130.5XB56.0XH45.4 (mm)/L5.138XB2.205XH1.787 (inch); Additional Features: INDUCTANCE 4.5 MILLIHENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved