Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec SSM-120-L-DV-LC is a 2-row, 40-contact board connector with 0.1" pitch ideal for split board lock mounting. Featuring liquid crystal polymer insulator and gold mating contact finish, it operates b/w -55 to 125°C with a rated power of 5.2A, making it suitable for high-temp applications in electronics.
Median Price
$5.980
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Sager
1+ parts
100+ parts
$4.520
1k+ parts
$3.280
10k+ parts
-
Samtec
$2.300
Powell Electronics
$3.850
Mouser Electronics
$5.990
$4.970
$3.860
$2.780
DigiKey
$32.620
Verical
$3.276
Nova Conductors
$4.190
Vyrian
Bristol Electronics
Atlantic Semiconductor
Semtec, LLC
Semi Source
Continental Prestige Electronics
$4.106
Argo Parts USA
AZTECH Wire
$12.760
Netroflash
$3.981
$3.897
The close proximity of the mating contacts allows for high density and compact design, making this product suitable for applications where space is limited.
The high rated current capacity of 5.2 A ensures that this connector can handle power requirements efficiently and reliably.
The use of liquid crystal polymer as the insulator material provides excellent mechanical strength, heat resistance, and dimensional stability, making the connector durable and reliable.
Phosphor bronze is known for its corrosion resistance and electrical conductivity, ensuring reliable electrical connections in the connector.
The surface mount termination type allows for easy and efficient soldering onto the PCB, saving assembly time and reducing the risk of solder joints breaking.
Headers & Edge Type Connectors SSM-120-L-DV-LC attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Power:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
SSM-120-L-DV-LC Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Comchip Technology
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
1N4148WS
Rugao Dachang Electronic
DF40HC(3.0)-100DS-0.4V(58)
Hirose Electric
DF40HC(3.0)-100DS-0.4V(58) by Hirose Electric is a 2-row stacking connector with 100 contacts, 0.016" pitch, and 100VAC voltage rating. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and phosphor bronze contact material.
22-03-5045
Molex
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
50-57-9402
The Molex 50-57-9402 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.199 inch. It has an insulation resistance of 10^10 ohm and is commonly used in commercial applications requiring a reliable, polarized housing for signal currents up to 3 A.
35362-1250
Molex 35362-1250 is a board connector with 12 contacts, 0.079" pitch, and matte tin finish. It has a rectangular PCB contact pattern and is used in commercial applications requiring reliable connections on boards with UL flammability rating of 94V-0.
560020-0220
The Molex 560020-0220 is a board connector with 2 contacts, 0.079" pitch, and 3A signal current rating. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connectors with surface mount termination.
53261-1071
Molex 53261-1071 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring male blade pin-skt contacts in right-angle mounting style with surface mount termination.
DF11-4DS-2C
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
7-188275-6
TE Connectivity
TE Connectivity 7-188275-6 is a FFC/FPC connector with 0.05" mating contact pitch, 100 V rated voltage, and -40 to 105 °C operating temperature range. It has POLYAMIDE46 insulator material and is ideal for board mounting applications requiring high insulation resistance and low contact resistance.
89947-710LF
Amphenol Communications Solutions
Amphenol's 89947-710LF is a 2-row board connector with gold over nickel finish, rated for 1A signal current. With a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 919VAC dielectric voltage. Ideal for cable mounting applications in commercial settings, this durable connector operates b/w -40°C to 105°C temperature range.
SFW12S-2STE1LF
The Amphenol SFW12S-2STE1LF is a 12-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 flammability rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
USL00-30L-A
Kel
The Kel USL00-30L-A is a 30-contact board connector with a mating contact pitch of 0.016". It features an insulation resistance of 100M ohm and can withstand up to 200VAC. Ideal for commercial applications, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.
502351-0800
The Molex 502351-0800 is a board connector with mating contact pitch of 0.079", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. It is used in commercial applications requiring an 8-contact male receptacle with crimp termination for cable mounting.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
10124017-1022325LF
Amphenol's 10124017-1022325LF is a 25-contact male plug connector with gold flash finish. Featuring liquid crystal polymer insulator, it has 0.039" mating pitch and 707VAC dielectric voltage rating. Ideal for board stacking applications with UL flammability rating of 94V-0.
2023960407
Molex 2023960407 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring male connectors with right-angle mounting style and surface mount termination.
S3B-PH-K-S(LF)(SN)
J S T Mfg
S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.
DTM06-6S
DTM06-6S by TE Connectivity is a 2-row loaded board connector with a body length of 1.185", width of 0.6", and depth of 0.817". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used in applications requiring a polarized housing, such as cable mounting with strain relief.
1-640456-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 1;
22-29-2021
Molex 22-29-2021 header connector features 0.1" pitch, 4A signal current rating, and polyamide insulation for durability. Ideal for board connections in commercial applications with UL and CSA standards compliance. Dimensions: 0.2"x.23"x.46", operating temp range of 0-75°C, and matte tin over nickel finish for reliable solder termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSM-116-L-SV
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
SSM-120-L-DV-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO; MIL Conformity: NO;
SSM-120-L-DV
Samtec SSM-120-L-DV is a 2-row, 40-contact board connector with 0.1" pitch and 5.2A power rating. Featuring liquid crystal polymer insulator, gold mating contacts, and tin finish, it operates b/w -55°C to 125°C. Ideal for applications requiring high current transmission on PCBs with straight mounting style.
SSM-104-L-DV
SSM-104-L-DV by Samtec is a 2-row board connector with 8 contacts. It features a mating contact pitch of 0.1", rated current of 5.2A, and operates b/w -55°C to 125°C. Ideal for applications requiring a reliable surface mount socket connection on PCBs with a rectangular contact pattern.
SSM-105-L-DV
SSM-105-L-DV by Samtec is a 2-row board connector with a mating contact pitch of 0.1 inch. It has a rated current of 5.2 A and can operate at temperatures ranging from -55 to 125 °C. This connector is commonly used in commercial applications requiring surface mount termination and features Tiger Claw contacts for added reliability.
SSM-108-L-SV
SSM-108-L-SV by Samtec is a 1-row, 8-contact board connector with a mating contact pitch of 0.1 inches. It is commonly used in applications requiring high insulation resistance and dielectric withstand voltage, such as PCB mounting for electronic devices.
SSM-109-L-DV-BE-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Minimum Operating Temperature: -55 Cel;
SSM-109-L-DV-BE-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Withdrawal Force (N): 1.21; Plating Thickness (inch): 10u;
SSM-109-L-DV-BE-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125; Mixed Contacts: NO;
SSM-120-L-DV-BE-LC
SSM-120-L-DV-BE-LC by Samtec is a 2-inch long, 0.2-inch wide, and 0.288-inch deep board connector with a mating contact pitch of 0.1 inch. It has a rated current of 5.2A and is made of LIQUID CRYSTAL POLYMER. This connector is commonly used in commercial applications requiring surface mount termination and multiple mating parts availability.
SSM-120-L-DV-BE-M
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT; Filter Feature: NO;
SSM-120-L-DV-M
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: TIGER CLAW CONTACT; Body or Shell Style: SOCKET;
SSM-120-L-DV-BE-LC-P
Samtec SSM-120-L-DV-BE-LC-P is a 2-row, 40-contact board connector with 0.1" pitch ideal for split board lock mounting. Featuring liquid crystal polymer insulator and tin finish with nickel barrier, it operates b/w -55°C to 125°C with a rated power of 5.2A. Perfect for applications requiring high-density connections in harsh environments.
SSM-120-L-DV-LC-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR; MIL Conformity: NO;
SSM-106-L-DV-BE-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 10u; Mounting Option-1: LOCKING;
SSM-106-L-DV-BE-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 2; Reference Standard: UL;
SSM-106-L-DV-BE-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: GOLD (10); Termination Type: SURFACE MOUNT;
SSM-120-L-DV-BE-A-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Withdrawal Force (N): 1.21; Termination Type: SURFACE MOUNT;
SSM-120-L-DV-BE-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125; UL Flammability Code: 94V-0;
SSM-120-L-DH-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved