Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 51021-1100 is a board connector with 11 contacts, 0.049" pitch, and 0.61" body length. It has an insulation resistance of 100M ohm, operates b/w -40 to 85°C, and uses crimp termination. Ideal for commercial applications requiring reliable female connectors with locking mounting option.
Median Price
$0.232
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.215
100+ parts
-
1k+ parts
$0.189
10k+ parts
$0.170
Adafruit Industries
$0.221
$0.210
Heilind Electronics
$0.195
$0.183
Chip1Stop
$0.378
DigiKey
$0.460
$0.273
$0.217
Element14
$0.524
$0.229
$0.198
Misumi USA
$0.750
Farnell
$0.204
$0.193
Powell Electronics
$0.180
Verical
$0.181
$0.158
Master Electronics
$0.408
$0.267
TTI
$0.226
$0.162
Newark
$0.285
PSC Electronics
Greenchips
$0.077
$0.057
$0.048
Digiode
$0.167
TestEquity
$0.200
Nova Conductors
$0.284
DF Sales Co.
$0.366
IBS Electronics
$0.172
Q Components
Classic Components Corporation
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Vyrian
VNN
Prism Electronics
Bisco
A2Z Electronics, Inc.
Semicontronic
$0.150
$0.146
Corphita
Advanced Electronics
Argo Parts USA
$0.256
$0.248
Continental Prestige Electronics
$0.420
$0.243
$0.175
Aztec Data Supply Inc.
$6.681
Andel Nordic
$8.820
$8.467
Perfect Parts
EMSNET (Excess)
Kepictronics
Assy Fe
GreenTree Electronics
Netroflash
$0.279
$0.270
$0.264
Robosynatics
Lucentia Tech
The closely spaced contacts allow for efficient and reliable connections between the header and edge type connectors.
The compact size of the connector makes it suitable for applications where space is limited.
High insulation resistance ensures that the contacts remain isolated, preventing short circuits and ensuring safe operation.
The narrow body width allows for high-density mounting on a PCB or other electronic devices.
The appropriate depth of the body provides enough space for the contacts and ensures a secure connection.
Polybutylene is known for its high thermal and electrical insulation properties, making it a suitable material for this connector.
With a high maximum operating temperature, this connector can withstand elevated temperature environments without compromising performance.
The connector remains operational even at low temperatures, making it versatile for a wide range of applications.
Designed specifically for board-to-board or board-to-cable connections, ensuring compatibility with various electronic devices.
The UL 94V-0 flammability rating ensures that the connector is resistant to combustion, enhancing safety in case of fire.
With 11 contacts, this connector allows for multiple connections, enabling complex electronic circuits.
The cable mounting type offers flexibility in installation and allows for easy connection to external devices.
Crimp termination provides a reliable and secure connection, reducing the risk of contact failure or disconnection.
The female contact gender is commonly used for receptacles and ensures compatibility with male connectors.
Low contact resistance helps in minimizing power loss and ensuring efficient transmission of electrical signals.
The receptacle style of the connector provides a housing for the contacts, offering protection and secure connection.
The locking mounting option ensures that the connector stays securely attached, preventing accidental disconnection.
The rectangular contact pattern allows for a standardized and organized layout of the contacts, facilitating easy identification and connection.
The commercial reliability rating indicates that the connector is suitable for use in commercial applications with consistent performance.
Headers & Edge Type Connectors 51021-1100 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
51021-1100 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 051021yyyy 02/Jun/2016
PCN Assembly/Origin - Mult Devs Material Source 28/Sep/2021
PCN Packaging - 51021 Series Packaging 17/Jun/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Hitano Enterprise
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Onsemi
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
26-60-4020
Molex
The Molex 26-60-4020 is a board connector with 0.156" mating contact pitch, suitable for commercial applications. Featuring a 7A signal current rating, it has a durable design with 25 cycles of use and operates b/w 0°C to 75°C temperature range. The connector uses tin finish on brass contacts and offers high insulation resistance of 1Gohm.
6420-9200
3m Electronic Products Division
3M Electronic Products Division's 6420-9200 is a 20-contact board connector with 2 rows, 0.1" pitch, and glass-filled polyester insulator. It features UL94V-0 flammability rating, solder termination, and straight mounting style. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
66506-322LF
Amphenol Communications Solutions
Amphenol's 66506-322LF is a 16-contact, 2-row board connector with a terminal pitch of 2.54mm and UL94V-0 flammability rating. It features male contacts for solder termination and straight mounting style, ideal for headers & edge type connectors in various electronic applications.
TMM-110-01-S-D-SM-TR
Samtec
The Samtec TMM-110-01-S-D-SM-TR is a 2-row, 20-contact board connector with a mating contact pitch of 0.079". It features tin termination with nickel barrier, gold finish, and phosphor bronze contacts. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -55°C to 125°C.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
70553-0005
Molex 70553-0005 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", matte tin finish, and glass-filled polyester insulator. It is used in applications requiring right-angle mounting on PCBs for reliable commercial connections.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
7-215083-6
TE Connectivity
TE Connectivity 7-215083-6 is a dual-row board connector with 0.1" pitch, rated for 100V and 1.5A signal current. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, suitable for commercial applications in cable mounting with 28 AWG wires.
53048-0410
The Molex 53048-0410 is a board connector with 4 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. It has a right angle mounting style and solder termination type, suitable for commercial applications with operating temperatures ranging from -40°C to 85°C.
TCMD-12-01
Samtec's TCMD-12-01 is a 24-contact, 2-row board connector with terminal pitch of 2mm. It supports IDC/solder termination and male contact gender. Ideal for applications requiring straight mounting on both boards and cables.
39-53-2165
Molex 39-53-2165 FFC/FPC Connector features 16 contacts with 0.049" pitch, 0.197" body width, and 0.386" depth. Ideal for PCB applications requiring a 1.9812mm row spacing, this UL-certified connector offers reliable solder termination in commercial settings.
FTSH-105-01-L-DV-K-FR
Samtec's FTSH-105-01-L-DV-K-FR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. Featuring a terminal pitch of 1.27mm, it is UL 94V-0 rated for surface mount applications. Ideal for use in headers & edge type connectors on PCBs.
746-066-520-601
Edac
Edac 746-066-520-601 is a 2-row card edge connector with 66 contacts. It features a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
90142-0010
The Molex 90142-0010 is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It has a body width of 0.304 inch and is commonly used in cable mounting applications.
TSW-106-17-T-S
Samtec TSW-106-17-T-S is a 6-contact board connector with 0.1" pitch, ideal for commercial applications. Featuring tin contact finish and polybutylene terephthalate insulator, it operates b/w -55°C to 105°C. With a rectangular PCB pattern and solder termination, this male connector offers reliable performance in various electronic devices.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
MTCB1X-105-XXXCS025
BOARD CONNECTOR;
35572-0300
Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.
SF56S006V4BR2000
Japan Aviation Electronics Industry
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO;
53261-0671
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
51021-0400
The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
51021-0200
The Molex 51021-0200 is a board connector with 0.049" pitch, 0.167" body length, and POLYBUTYLENE insulation material. It has 2 contacts, operates b/w -40 to 85°C, and features a female crimp termination for cable mounting. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability rating.
51021-0800
The Molex 51021-0800 is a board connector with 8 contacts, 0.049" pitch, and 0.463" body length. It has an insulation resistance of 100M ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
51021-0300
The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.
51021-0500
The Molex 51021-0500 is a board connector with 5 contacts, 0.049" pitch, and 0.315" body length. It features POLYBUTYLENE insulation material and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable female crimp connectors with locking mounting options.
51021-1000
The Molex 51021-1000 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
51021-0900
The Molex 51021-0900 is a board connector with 9 contacts, 0.049" pitch, and 0.512" body length. It has a female contact gender, crimp termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable cable mounting with locking option.
51021-1500
The Molex 51021-1500 is a board connector with 15 contacts, 0.049" pitch, and 0.807" body length. It features POLYBUTYLENE insulation material, -40 to 85°C operating temperature range, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable female crimp connectors with rectangular contact pattern and locking mounting option.
51021-1200
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Reference Standard: UL; Additional Features: COMPATIBLE CONTACTS: 50079-8000; 50058-8000; 50079-8100; 50058-8100;
5-102570-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
5-102618-8
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
5-102202-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Length: .13 inch;
5-102617-2
TE Connectivity 5-102617-2 is a 2-row, 8-contact board connector with 0.1" pitch. It features POLYETHYLENE insulation, tin finish with nickel barrier, and operates b/w -65 to 105°C. Ideal for commercial applications requiring a reliable, polarized male connector with right-angle mounting and solder termination.
5102153-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN (100) OVER NICKEL (50); Terminal Pitch (mm): 2.54; Mounting Style: STRAIGHT;
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 10;
51021-1400
Molex 51021-1400 is a BOARD CONNECTOR with 14 contacts, 0.049" pitch, and POLYBUTYLENE insulator. Ideal for CABLE mounting applications, it offers -40 to 85°C operating range and UL94V-0 flammability rating.
5-102766-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 10u; No. of Rows Loaded: 2;
51024-0600
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Pattern: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved