Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DF3A-2P-2DSA by Hirose Electric is a board connector with 0.079" mating contact pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a solder termination type and operates b/w -30 to 85 °C temperatures.
Median Price
$0.134
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.084
100+ parts
-
1k+ parts
10k+ parts
$0.067
Interstate Connecting
$0.130
$0.104
DigiKey
$0.220
$0.158
$0.114
Mouser Electronics
$0.157
$0.128
$0.107
Future Electronics
$0.093
Verical
$0.181
$0.103
Master Electronics
$0.138
$0.085
Newark
$0.179
Chip1Stop
$0.082
$0.069
RS (Exports)
$0.091
$0.057
$0.054
Nova Conductors
$0.074
TME
$0.170
$0.113
$0.083
$0.064
Maritex
$0.589
$0.133
$0.090
IBS Electronics
$0.166
Chip Stock
NAC Semi
$0.191
Vyrian
ACDS - Activité Composants Distribution Service
Sensible Micro Corp
Prism Electronics
Lantek
Semtec, LLC
Semicontronic
$0.059
$0.058
Ampacity Inc.
Corohmni
$0.068
Advanced Electronics
$0.070
Argo Parts USA
$0.072
CoreStaff
$0.116
$0.051
$0.045
Aztec Data Supply Inc.
$8.870
Perfect Parts
Eastek
Abacus Technologies
GreenTree Electronics
Netroflash
Continental Prestige Electronics
$0.079
$0.046
EMSNET (Excess)
Authorized Procurement Solutions
A-Z Elektronik GmbH
The small contact pitch allows for a high density of contacts, maximizing the connectivity options on the board.
High insulation resistance ensures reliable performance and prevents electrical breakdown.
High dielectric voltage withstand capability ensures safety and reliability in high voltage applications.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance.
UL 94V-0 flammability rating indicates that the connector meets strict safety standards for fire resistance.
Headers & Edge Type Connectors DF3A-2P-2DSA attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DF3A-2P-2DSA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
DS18B20
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
First Components International
929665-04-36-EU
3m Electronic Products Division
3m Electronic Products Division's 929665-04-36-EU is a 72-contact, 2-row board connector with gold over nickel termination. It features copper alloy contacts, UL94V-0 flammability rating, and male gender. Ideal for straight mounting on boards, this connector has a terminal pitch of 2.54mm and is suitable for headers & edge type applications.
22-27-2051
Molex
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
TSW-102-07-G-S
Samtec
TSW-102-07-G-S by Samtec is a 0.1" pitch board connector with gold over nickel termination finish. It has a max operating temperature of 125°C and min operating temperature of -55°C. This connector is commonly used in commercial applications and offers reliable performance.
6-1473005-1
TE Connectivity
CARD EDGE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
DTM04-3P-E003
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
51110-0450
Molex 51110-0450 is a 2-row board connector with 0.079" contact pitch, suitable for commercial applications. Featuring polyester insulation, it has 4 contacts with 40mohm resistance and operates b/w -40 to 105°C. Ideal for cable mounting, it offers a polarization key and UL94V-0 flammability rating.
SHR-14V-S-B
J S T Mfg
SHR-14V-S-B by J S T Mfg is a 14-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
DF3-2P-2DSA(01)
Hirose Electric
DF3-2P-2DSA(01) by Hirose Electric is a 2-contact board connector with 0.079" pitch, gold termination finish, and 650VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 50 cycles.
SHR-02V-S-B
SHR-02V-S-B by J S T Mfg is a BOARD CONNECTOR with 2 FEMALE contacts. It has UL 94V-0 flammability rating, suitable for CABLE mounting with CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
155222-2200-RA-WE
3M Electronic Products Division's 155222-2200-RA-WE is a BOARD CONNECTOR with Matte Tin (Sn) finish. Featuring 22 contacts, it has GOLD (10) OVER NICKEL (50) mating finish. Ideal for surface mount applications with 2mm terminal pitch, this connector is UL 94V-0 rated.
B2B-ZR-SM4-TF(LF)(SN)
B2B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
XHP-4-BK
XHP-4-BK by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
746-014-520-606
Edac
Edac 746-014-520-606 is a 14-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to +105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating.
2-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
2110110-1
The TE Connectivity 2110110-1 is a board connector with 180 contacts, featuring a mating contact pitch of 0.075" and insulator made of glass-filled liquid crystal polymer. It has a body length of 1.197", width of 0.909", and depth of 1.272". Ideal for applications requiring high reliability in commercial settings, such as PCB connections with rectangular patterns at temperatures ranging from -55°C to 85°C.
1-640456-6
TE Connectivity 1-640456-6 is a board connector with 16 contacts, 0.1" pitch, and 5A signal rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable male connectors on PCBs.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
22-28-5123
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF3A-4P-2DSA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE;
DF3A-2P-2DSA(10)
DF3A-2P-2DSA(10) by Hirose Electric is a 2-contact male board connector with tin finish. It has a terminal pitch of 2mm and is UL 94V-0 rated. Ideal for straight mounting applications in headers & edge type connectors.
DF3A-2P-2DSA(18)
DF3A-2P-2DSA(18) by Hirose Electric is a 2-row, 2-contact male board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and is commonly used in commercial applications requiring reliable connections.
DF3A-2P-2DSA(16)
BOARD CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: Tin (Sn);
DF3A-2P-2DSA(17)
DF3A-2P-2DSA(17) by Hirose Electric is a 2-contact board connector with 0.079" pitch, rated for 3A signal current. Featuring TIN finish brass contacts, it has a dielectric voltage of 650VAC and operates b/w -30 to 85°C. Ideal for commercial applications requiring reliable connections on PCBs.
DF3A-2P-2DSA(19)
DF3A-2P-2DSA(19) by Hirose Electric is a 2-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 3A signal current rating. It features POLYAMIDE insulation, TIN finish, and BRASS contacts for applications requiring a reliable commercial-grade header & edge type connector.
DF3A-2P-2DS
DF3A-2P-2DS by Hirose Electric is a 2-contact male board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and min operating temperature of -30°C. This connector is commonly used in commercial applications requiring reliable connections on printed circuit boards (PCBs).
DF3A-4P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; DIN Conformance: NO;
DF3A-5P-2DSA
DF3A-3P-2DSA
DF3A-3P-2DSA by Hirose Electric is a 3-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It features tin termination finish, operates b/w -30 to 85°C, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections in black insulator color.
DF3A-3P-2DSA(18)
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
DF3A-3P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn); IEC Conformity: NO; Mounting Type: BOARD;
DF3A-5P-2DSA(14)
DF3A-5P-2DSA(14) by Hirose Electric is a 5-contact male board connector with a terminal pitch of 2mm. It features tin termination contact finish and is suitable for mounting on boards. This connector has a UL flammability code of 94V-0 and is commonly used in headers & edge type connectors applications.
DF3A-3P-2DSA(16)
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE; Termination Type: SOLDER KINKED LEADS;
DF3A-5P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 5; Filter Feature: NO; Mixed Contacts: NO;
DF3A-10P-2DSA
DF3A-6P-2DS
DF3A-5P-2DS
The Hirose Electric DF3A-5P-2DS is a 5-pin board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and min operating temperature of -30°C. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
DF3A-4P-2DS
DF3A-11P-2DS
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved