Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Hirose Electric DF3A-5P-2DS is a 5-pin board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and min operating temperature of -30°C. This connector is commonly used in commercial applications requiring reliable connections on PCBs.
Median Price
$0.266
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.330
100+ parts
$0.238
1k+ parts
$0.199
10k+ parts
$0.158
DigiKey
$0.203
$0.172
Sager
$4.200
-
Newark
$0.259
$0.220
$0.175
Chip1Stop
$0.131
RS (Exports)
$0.143
$0.108
Farnell
$0.178
$0.140
$0.126
Element14
$0.272
$0.256
Component Electronics Inc.
$0.270
$0.200
$0.180
Vyrian
LIBRA Elektronik GmbH
Nova Conductors
PC Components Company LLC
Bristol Electronics
Sensible Micro Corp
$0.162
Ampacity Inc.
$0.111
Corohmni
$7.188
Aztec Data Supply Inc.
$9.210
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Eastek
Bastille Electronics
EMSNET (Excess)
0.079 - The close contact pitch allows for efficient signal transmission and reliable connectivity.
0.472 inch - The longer body length provides ample space for the connection and ensures easy installation.
1000000000 ohm - The high insulation resistance prevents leakage and signal loss, ensuring optimal performance and data integrity.
0.197 inch - The wider body width offers stability and durability to support the connector's functionality.
650VAC - The high voltage withstand capability safeguards against electrical breakdown and ensures safe operation.
Tin (Sn) - The tin finish on the termination contact provides corrosion resistance, enhancing the connector's longevity.
0.283 inch - The deeper body depth allows for more secure and reliable connections.
POLYAMIDE - The polyamide insulator material offers excellent electrical insulation properties and durability.
1 - The single loaded row simplifies the assembly process and promotes efficient usage.
85 - The high maximum operating temperature ensures compatibility with various environmental conditions.
30 °C - With a low minimum operating temperature, this product remains functional even in cold environments.
1 - The single PCB row design facilitates easier integration onto circuit boards.
BOARD CONNECTOR - This type of connector is specifically designed for secure and reliable connections on circuit boards.
94V-0 - The UL94V-0 flammability rating guarantees excellent fire resistance, ensuring safety in sensitive applications.
GUIDE SLOT(S) - The polarization key with guide slots allows for proper alignment during installation, preventing incorrect connections.
BLACK - The black insulator color provides a visually appealing design.
UL - The compliance with UL standards assures quality and reliability.
5 - The 5 contacts provide ample connections for various applications.
ONE - The presence of a single connector simplifies the wiring process and reduces complexity.
BOARD - This mounting type ensures a secure attachment to the circuit board, preventing disconnections.
2 - The 2mm terminal pitch offers compatibility with a variety of devices and circuit boards.
RECTANGULAR - The rectangular contact pattern allows for efficient and reliable connections on PCBs.
SOLDER - The solder termination type enables strong and durable connections.
MALE - The male contact gender ensures compatibility with corresponding female connectors.
30 mohm - The low contact resistance helps maintain signal integrity and minimizes power loss.
RIGHT ANGLE - The right-angle mounting style allows the connector to be easily installed in space-constrained applications.
SQ PIN-SKT - The square pin socket contact style ensures a secure and reliable connection.
4.3924 - The high maximum insertion force ensures a stable connection that is not easily dislodged.
0.114 inch - The longer terminal length provides a secure connection and ensures reliable electrical transmission.
LOCKING - The locking mounting option adds additional security and prevents accidental disconnections.
RECTANGULAR - The rectangular contact pattern facilitates proper alignment and ensures efficient electrical connections.
COMMERCIAL - This product is built to commercial reliability standards, ensuring dependable performance.
Headers & Edge Type Connectors DF3A-5P-2DS attributes and parameters. Explore more Headers & Edge Type Connectors devices from Hirose Electric
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DF3A-5P-2DS Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Hirose Electric Co., Ltd. is a Japanese company specializing in the manufacturing of electric connectors. The company was founded in 1937 as Hirose Manufacturing, changed its name to Hirose Electric in August 1963 and started selling internationally in 1968. Hirose also manufactures flexible printed circuits for smartphones and gets about 70 percent of revenue from outside Japan.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Littelfuse
SM02B-GHS-TB(LF)(SN)
J S T Mfg
SM02B-GHS-TB(LF)(SN) by J S T Mfg is a 5.75" BOARD CONNECTOR with 0.049" pitch, ideal for PCBs. Features include 100000000 ohm insulation resistance, 500VAC dielectric voltage, and -25 to 85 °C operating range. Perfect for applications requiring male connectors with right angle mounting and surface mount termination.
5011
Aries Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: POLARIZATION AVAILABLE, MAX CONTACTS (SERIES)=10, MAX ROWS (SERIES)=2; Termination Type: SURFACE MOUNT;
2103
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
51021-0200
Molex
The Molex 51021-0200 is a board connector with 0.049" pitch, 0.167" body length, and POLYBUTYLENE insulation material. It has 2 contacts, operates b/w -40 to 85°C, and features a female crimp termination for cable mounting. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability rating.
53261-0771
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
02011602101
Harting Electronics & Kg
02011602101 by Harting Electronics & Kg is a 160-contact board euro connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring gold over nickel termination finish, it has an insulation resistance of 1T ohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring high durability and reliability.
20021121-00006C4LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 20021121-00006C4LF is a board connector with 0.05" mating contact pitch, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for applications requiring a durable male connector with surface mount termination and black insulator color.
801-43-025-10-001000
Mill-max Mfg
801-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, MATTE TIN finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors on PCBs.
DF3-4S-2C
Hirose Electric
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
723-2
Wago
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Mounting Type: CABLE; Additional Features: MAX CONTACTS (SERIES)=6, MAX ROWS (SERIES)=1;
B4B-XH-A-GU
B4B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
FTSH-110-01-L-DV-K-A-P
Samtec
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
B4B-XH-A
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
53047-0210
Molex 53047-0210 is a board connector with 2 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. Ideal for commercial applications requiring a polarized housing, solder termination, and UL94V-0 flammability rating.
53313-3465
Molex 53313-3465 is a 34-contact board connector with TIN finish. Featuring 2 loaded rows, it has a terminal pitch of 2mm and UL94V-0 flammability rating. Ideal for applications requiring male contacts, solder termination, and straight mounting style.
52559-2052
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
USL00-30L-A
Kel
The Kel USL00-30L-A is a 30-contact board connector with a mating contact pitch of 0.016". It features an insulation resistance of 100M ohm and can withstand up to 200VAC. Ideal for commercial applications, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
FTSH-105-01-L-DV-K-P
Samtec's FTSH-105-01-L-DV-K-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features TIN over NICKEL termination finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with a rectangular contact pattern.
B2B-XH-A(LF)(SN)
B2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a male contact gender, solder termination, and operating temperatures from -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DF3A-4P-2DSA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE;
DF3A-2P-2DSA
DF3A-2P-2DSA(10)
DF3A-2P-2DSA(10) by Hirose Electric is a 2-contact male board connector with tin finish. It has a terminal pitch of 2mm and is UL 94V-0 rated. Ideal for straight mounting applications in headers & edge type connectors.
DF3A-2P-2DSA(18)
DF3A-2P-2DSA(18) by Hirose Electric is a 2-row, 2-contact male board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and is commonly used in commercial applications requiring reliable connections.
DF3A-2P-2DSA(16)
BOARD CONNECTOR; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: Tin (Sn);
DF3A-2P-2DSA(17)
DF3A-2P-2DSA(17) by Hirose Electric is a 2-contact board connector with 0.079" pitch, rated for 3A signal current. Featuring TIN finish brass contacts, it has a dielectric voltage of 650VAC and operates b/w -30 to 85°C. Ideal for commercial applications requiring reliable connections on PCBs.
DF3A-2P-2DSA(19)
DF3A-2P-2DSA(19) by Hirose Electric is a 2-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 3A signal current rating. It features POLYAMIDE insulation, TIN finish, and BRASS contacts for applications requiring a reliable commercial-grade header & edge type connector.
DF3A-2P-2DS
DF3A-2P-2DS by Hirose Electric is a 2-contact male board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and min operating temperature of -30°C. This connector is commonly used in commercial applications requiring reliable connections on printed circuit boards (PCBs).
DF3A-4P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; DIN Conformance: NO;
DF3A-5P-2DSA
DF3A-3P-2DSA
DF3A-3P-2DSA by Hirose Electric is a 3-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It features tin termination finish, operates b/w -30 to 85°C, and has UL94V-0 flammability rating. Ideal for commercial applications requiring reliable connections in black insulator color.
DF3A-3P-2DSA(18)
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
DF3A-3P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn); IEC Conformity: NO; Mounting Type: BOARD;
DF3A-5P-2DSA(14)
DF3A-5P-2DSA(14) by Hirose Electric is a 5-contact male board connector with a terminal pitch of 2mm. It features tin termination contact finish and is suitable for mounting on boards. This connector has a UL flammability code of 94V-0 and is commonly used in headers & edge type connectors applications.
DF3A-3P-2DSA(16)
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 650VAC; No. of Connectors: ONE; Termination Type: SOLDER KINKED LEADS;
DF3A-5P-2DSA(10)
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 5; Filter Feature: NO; Mixed Contacts: NO;
DF3A-10P-2DSA
DF3A-6P-2DS
DF3A-4P-2DS
DF3A-14P-2DSA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved