Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 2-1761608-3 is a board connector with 10 contacts, dual polarization, and solder termination. It has a mating contact pitch of 0.1 inch and operates b/w -65 to 105 °C. Ideal for commercial applications requiring a reliable male plug with straight mounting and blue insulator color.
Median Price
$4.970
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Element14
1+ parts
$3.973
100+ parts
$3.392
1k+ parts
$3.213
10k+ parts
-
TE Connectivity
$3.540
$3.310
Mouser Electronics
$5.790
$4.030
$3.620
$3.610
Arrow
$5.834
$3.572
Chip1Stop
$6.230
$3.140
$2.750
Newark
$6.310
$4.750
$4.520
DigiKey
$6.320
$5.017
$4.061
$3.874
Powell Electronics
$11.799
$7.607
Verical
$3.663
$3.608
$3.462
Future Electronics
$2.650
$2.560
TTI Europe
$3.047
$2.872
$2.763
Farnell
$4.348
Master Electronics
$2.880
$2.740
$2.690
Freelance Electronics
$1.990
$2.090
$1.970
Digiode
$2.489
Nova Conductors
$3.533
Bristol Electronics
$5.586
$2.625
$2.402
IBS Electronics
$4.278
VNN
NAC Semi
$5.050
Vyrian
TME
$3.743
$3.249
Dan-Mar Components
Ashlea Components Ltd
ACDS - Activité Composants Distribution Service
Rapid Electronics
$5.191
Electro Sonic
$4.390
$3.760
$3.060
Electronics Depot
Semtec, LLC
Semi Source
Semicontronic
$2.230
$2.174
$2.163
Corphita
$2.358
Argo Parts USA
$3.382
Aranea Global
$3.324
Continental Prestige Electronics
$4.820
$2.950
$2.660
Aztec Data Supply Inc.
$5.894
Advanced Electronics
$7.035
$6.683
Perfect Parts
Authorized Procurement Solutions
Glotronic Ltd.
Assy Fe
GreenTree Electronics
Eastek
Close pitch allows for compact design and efficient use of space on the PCB.
Optimal length for easy integration and installation on the board.
High insulation resistance ensures reliable performance and signal integrity.
Compact width for fitting into tight spaces on the PCB.
Durable finish that provides good conductivity and corrosion resistance.
High-quality insulator material for reliable insulation and long-term durability.
Wide temperature range for versatile use in various environments.
Can withstand low temperatures, making it suitable for a range of applications.
Sufficient plating thickness for good conductivity and protection against wear.
Color-coded for easy identification and organization on the PCB.
Adequate number of contacts for connecting multiple components or signals.
Secure mounting on the PCB for stable connection and operation.
Standard terminal pitch for compatibility with a wide range of components.
Square pin socket style for reliable and secure connections.
Meets commercial standards for dependable performance in various applications.
Headers & Edge Type Connectors 2-1761608-3 attributes and parameters. Explore more Headers & Edge Type Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mains Connector Rating:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
2-1761608-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Location 02/Jan/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Synsemi
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taiwan Semiconductor
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
154763-E
TE Connectivity's 154763-E header connector features a mating contact pitch of 0.05", insulation resistance of 10^10 ohm, and dielectric voltage rating of 707VAC. Ideal for board mounting applications in electronics, this male connector with liquid crystal polymer insulator offers durability up to 500 cycles at temperatures ranging from -55°C to 125°C.
307-074-422-278
Edac
Edac 307-074-422-278 is a CARD EDGE CONNECTOR with 74 contacts, 2 rows, and 0.156" pitch. It has a dielectric voltage of 2545VAC, insulation resistance of 5000000000 ohm, and operates b/w -40 to 105 °C. Ideal for board and panel mounting applications requiring high current signal connections.
3606
Aw Industries
CARD EDGE CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: BOARD; Manufacturer Series: 3606;
853-43-030-30-001000
Mill-max Mfg
853-43-030-30-001000 by Mill-max Mfg is a 2-row, 30-contact board connector with TIN finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. This female socket connector has a straight mounting style and is ideal for various electronic devices.
FFSD-25-01-N
Samtec
Samtec's FFSD-25-01-N is a 2-row BOARD CONNECTOR with 50 contacts made of BERYLLIUM COPPER. It features IDC termination and FEMALE contact gender, suitable for CABLE mounting applications.
22-28-5123
Molex
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
26-60-4020
The Molex 26-60-4020 is a board connector with 0.156" mating contact pitch, suitable for commercial applications. Featuring a 7A signal current rating, it has a durable design with 25 cycles of use and operates b/w 0°C to 75°C temperature range. The connector uses tin finish on brass contacts and offers high insulation resistance of 1Gohm.
02011602101
Harting Electronics & Kg
02011602101 by Harting Electronics & Kg is a 160-contact board euro connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring gold over nickel termination finish, it has an insulation resistance of 1T ohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring high durability and reliability.
104168-1620
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
XHP-2
J S T Mfg
XHP-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RECEPTACLE body style, and CRIMP termination. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
S3B-XH-A(LF)(SN)
S3B-XH-A(LF)(SN) by J S T Mfg is a 3-contact board connector with brass contacts and tin copper finish. It has a terminal pitch of 2.5mm, UL 94V-0 flammability rating, and right-angle mounting style. Ideal for applications requiring secure board-to-board connections in electronic devices.
831-43-025-10-001000
831-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish, and 2mm pitch. Ideal for board-to-board connections in various electronic applications due to its FEMALE contact gender, SOLDER termination, and STRAIGHT mounting style.
518-64-2
W+p Products
518-64-2 by W+p Products is a BOARD CONNECTOR with 64 contacts, rated at 1A signal current. Featuring POLYETHYLENE insulation material, it has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a crimp termination type with female contact gender.
MEM2051-00-195-00-A
Global Connector Technology
MEM2051-00-195-00-A by Global Connector Technology is a PCB connector with 0.043" contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for applications requiring a female right-angle compression contact style with surface mount termination.
B2PS-VH(LF)(SN)
B2PS-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and 1500VAC dielectric voltage. It has POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for PCBs needing right angle mounting with solder termination and male contact gender.
R
R by Aw Industries is a DIN and IEC conformant BOARD EURO CONNECTOR with 2.54mm Terminal Pitch. It supports PRESS FIT, SOLDER, WIRE WRAP terminations for FEMALE and MALE contacts. Ideal for applications requiring RIGHT ANGLE or STRAIGHT mounting on board or panel setups.
S2B-PH-K-S
S2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and is ideal for RIGHT ANGLE mounting on boards. This connector is UL 94V-0 rated, making it suitable for various electronic applications.
BM08B-GHS-TBT(LF)(SN)(N)
BM08B-GHS-TBT(LF)(SN)(N) by J S T Mfg is an 8-contact board connector with TIN over copper finish. It features phosphor bronze contact material, UL 94V-0 flammability code, and 1.25mm terminal pitch for surface mount termination. Ideal for applications requiring male gender connectors in straight mounting style on circuit boards.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
1-2199230-5
TE Connectivity 1-2199230-5 is a POLYETHYLENE card edge connector with 67 contacts in a 2-row configuration. It has a mating contact pitch of 0.5", operates b/w -40 to 80°C, and features a right-angle mounting style for board applications. Ideal for PCBs requiring 0.5A signal current rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2-1761603-3
TE Connectivity 2-1761603-3 is a dual-row board connector with 10 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mounting Type: BOARD; Termination Contact Finish: TIN;
2-1761603-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; UL Flammability Code: 94V-0; No. of Rows Loaded: 2;
TE Connectivity 2-1761603-5 is a dual-row board connector with 14 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with solder termination in blue color.
2-1761603-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Filter Feature: NO; JESD-609 Code: e3;
TE Connectivity 2-1761603-7 is a dual polarized board connector with 20 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
2-1761606-3
TE Connectivity 2-1761606-3 is a board connector with 10 contacts, 0.1" mating contact pitch, and 5000000000 ohm insulation resistance. Ideal for commercial applications, it features a polarized housing, solder termination type, and UL flammability rating of 94V-0.
2-1761603-9
TE Connectivity 2-1761603-9 is a dual-row board connector with 26 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105 °C. Ideal for commercial applications requiring reliable signal connections on PCBs.
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; Termination Type: SOLDER; Terminal Pitch (mm): 2.54;
2-1761607-3
TE Connectivity 2-1761607-3 is a dual polarized board connector with 10 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 0.8" and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
2-1761606-9
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 1 A;
2-1761606-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .362 inch;
2-1761465-2
CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; Panel Mount: NO; Insulator Color: BLACK;
2-1761603-6
TE Connectivity 2-1761603-6 is a 16-contact, 2-row plug connector with a mating contact pitch of 0.1 inch. It is commonly used in board-to-board connections and has a max operating temperature of 105°C.
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mounting Style: STRAIGHT; Mixed Contacts: NO;
2-1761605-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54;
2-1761607-8
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO;
2-1761609-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Minimum Operating Temperature: -65 Cel;
2-1761679-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: YES;
2-1761607-2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved