Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
Median Price
$0.453
Lifecycle Status
Suppliers In-Stock
68
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.210
100+ parts
-
1k+ parts
10k+ parts
Sager
$0.437
$0.401
$0.332
Arrow
$0.470
$0.394
$0.350
$0.307
Element14
$0.567
$0.555
$0.542
$0.530
Distrelec
$0.585
$0.375
RS Americas
$0.640
$0.500
$0.440
Farnell
$0.792
$0.649
Mouser Electronics
$0.800
$0.586
$0.488
$0.432
DigiKey
$0.820
$0.563
Adafruit Industries
$2.297
$2.182
Verical
$0.400
Powell Electronics
Master Electronics
$0.403
NEP Electronics
$0.435
$0.324
PEI Genesis
TTI Europe
$0.325
Heilind Electronics
$0.358
TTI
Newark
$0.498
Future Electronics
$0.250
$0.240
Interstate Connecting
$0.351
Avnet
$0.357
Chip1Stop
Nova Conductors
$0.407
Digiode
$0.415
TestEquity
$0.480
TME
$0.397
$0.327
Maritex
$0.561
$0.418
$0.333
Component Electronics Inc.
$0.770
$0.580
Bristol Electronics
$1.238
$0.458
$0.322
Q Components
Rutronik
$0.263
IBS Electronics
$0.547
$0.477
Vyrian
Greenchips
Chip Stock
Semtec, LLC
NAC Semi
$0.564
VNN
Sensible Micro Corp
Classic Components Corporation
Cyclops Electronics Ltd
PC Components Company LLC
Semi Source
Rebound Electronics
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
Electronics Depot
Prism Electronics
Brevan Electronics
Sunrise Surplus Inc.
Avant Electronics Limited
NexGen Digital
ACDS - Activité Composants Distribution Service
Dan-Mar Components
First Choice Components Inc.
Mil-Aero Solutions, Inc.
EPE Components Inc.
Inventory MP
Pegasus Components GmbH
Connector Distribution Corp
Right Parts Inc.
Kallista Electronics Ltd
EMSNET
Atlantic Semiconductor
Speed Components Ltd
North Shore Components
Huijzer Components
Semicontronic
$0.170
$0.166
$0.165
Corphita
$0.393
Argo Parts USA
$0.389
CoreStaff
$0.641
$0.286
Continental Prestige Electronics
$0.789
$0.476
Advanced Electronics
$4.199
$3.989
Andel Nordic
$5.074
$4.871
Aztec Data Supply Inc.
$5.426
Modulus Dynamics
$10.866
Perfect Parts
EMSNET (Excess)
Abacus Technologies
GreenTree Electronics
Kepictronics
Authorized Procurement Solutions
Lucentia Tech
$1.132
$1.109
Allen Electronics Distributors
$0.544
RC Electronics
Robosynatics
Futuretech Components
Cyclops Electronics Ltd (Excess)
Assy Fe
ErreBi Group
Infinite Electronics LLP (Excess)
SIE Connect GmbH (Excess)
Speed Components Ltd (Excess)
The close contact pitch allows for a high density of connections, ideal for applications where space is limited.
The compact body length makes this connector suitable for situations where space is a constraint.
High insulation resistance ensures reliable performance and prevents any unwanted electrical leakage.
With a high maximum operating temperature, this connector is suitable for use in a wide range of environments.
The right angle mounting style allows for easy installation and connection in tight spaces.
Low contact resistance ensures efficient and reliable signal transmission.
Headers & Edge Type Connectors 53261-0671 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
53261-0671 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Resin 08/Jan/2019
PCN Assembly/Origin - Mult Devs Additional Location 22/Oct/2021
PCN Packaging - Mult Devs Packaging/Quantity 05/Jan/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1552200168
Molex
WIRE AND CABLE;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Laube Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
Semiconductors
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Continental Device India
Space Power Electronics
22-55-2101
The Molex 22-55-2101 is a 2-row board connector with 0.1" pitch, suitable for commercial applications. Featuring glass-filled polyester insulator, it has 10 contacts and operates b/w -40 to 120°C. With crimp termination and female SQ pin-skt contact style, it is UL and CSA compliant for reliable performance in various electronic devices.
22-27-2051
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
S3B-XH-SM4-TB(LF)(SN)
J S T Mfg
S3B-XH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for applications requiring a male contact style, right angle mounting, and surface mount termination.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
823-22-016-10-000101
Mill-max Mfg
823-22-016-10-000101 by Mill-max Mfg is a 16-contact board stacking connector with gold finish. It features 2 rows, 2.54mm terminal pitch, and UL94V-0 flammability rating. Ideal for board-to-board connections in electronics applications.
TSW-102-07-G-S
Samtec
TSW-102-07-G-S by Samtec is a 0.1" pitch board connector with gold over nickel termination finish. It has a max operating temperature of 125°C and min operating temperature of -55°C. This connector is commonly used in commercial applications and offers reliable performance.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
70553-0003
Molex 70553-0003 is a board connector with 0.1" pitch, suitable for commercial applications. Features include tin finish, phosphor bronze contacts, and UL94V-0 rated insulator in black color. Ideal for PCB mounting with right angle style and solder termination.
SSM-116-L-SV
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
VHR-3N-BL
VHR-3N-BL by J S T Mfg is a 3-contact BOARD CONNECTOR with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation material, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector offers reliable performance with a polarization key and blue insulator color.
50-57-9408
The Molex 50-57-9408 is a board connector with a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and rated current of 3A. It is used in applications requiring a female connector with crimp termination, suitable for commercial reliability standards.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
853-87-054-30-001101
Preci-dip Sa
853-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, BERYLLIUM COPPER material, and TIN finish. It is ideal for surface mount applications in headers & edge type connectors, offering a terminal pitch of 1.27mm and UL Flammability Code of 94V-0.
DF11-8DP-2DSA(01)
Hirose Electric
DF11-8DP-2DSA(01) by Hirose Electric is a 2-row, 8-contact board connector with gold over nickel termination. Featuring a mating contact pitch of 0.079", it offers high insulation resistance of 1Gohm and withstands up to 650VAC. Ideal for commercial applications, this connector has a temperature range from -30°C to 85°C and boasts durability of 50 cycles.
22-01-2047
The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
7-188275-6
TE Connectivity
TE Connectivity 7-188275-6 is a FFC/FPC connector with 0.05" mating contact pitch, 100 V rated voltage, and -40 to 105 °C operating temperature range. It has POLYAMIDE46 insulator material and is ideal for board mounting applications requiring high insulation resistance and low contact resistance.
DTM04-12PA
TE Connectivity's DTM04-12PA is a 2-row board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. With dimensions of 1.72" x 0.796" x 1.575", it operates b/w -55°C to 125°C, suitable for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
104031-0811
104031-0811 by Molex is a PCB connector with 8 contacts, gold finish, and 0.043" pitch. It has a glass-filled liquid crystal polymer insulator, operates b/w -25°C to 85°C, and offers durability of 10k cycles. Ideal for commercial applications requiring male compression contacts in right-angle mounting on boards.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
53261-0371
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
53261-0271
53261-0271 by Molex is a board connector with 0.049" mating contact pitch, 100000000 ohm insulation resistance, and 39u plating thickness. Ideal for applications requiring a male blade pin-skt contact style in right angle mounting option with POLYAMIDE46 insulator material.
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
53261-0871
The Molex 53261-0871 is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a right-angle mounting style and surface mount termination type for durability in temperatures ranging from -40 to 105°C.
53261-0571
The Molex 53261-0571 is a board connector with a mating contact pitch of 0.049", insulation resistance of 100MΩ, and a max operating temperature of 105°C. It is commonly used in applications requiring surface mount termination and right angle mounting options.
53261-0771
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
53261-1071
Molex 53261-1071 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications requiring male blade pin-skt contacts in right-angle mounting style with surface mount termination.
53261-1271
Molex 53261-1271 is a board connector with 12 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. Ideal for commercial applications, it features tin finish contacts, POLYAMIDE46 insulator material, and operates b/w -40 to 105 °C.
53261-1171
The Molex 53261-1171 is a board connector with a mating contact pitch of 0.049 inches and a body length of 0.728 inches. It has an insulation resistance of 100M ohm and is commonly used in commercial applications for surface mount termination.
53261-0971
53261-0971 by Molex is a board connector with 9 contacts, 0.049" pitch, and 39u plating thickness. Ideal for commercial applications, it offers a mating contact pitch of 1.25mm and operates b/w -40°C to 105°C.
53261-1471
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
53261-1571
Molex 53261-1571 is a board connector with 15 contacts, 0.049" pitch, and 39u plating thickness. Ideal for commercial applications, it offers a mating contact pitch of 0.925", insulation resistance of 100M ohm, and operates b/w -40 to 105°C.
53266-0529
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
53261-1371
Molex 53261-1371 is a 1-row board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.827 inch and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications due to its durability and right angle mounting style.
53261-0290
53261-0690
53261-0610
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
53261-0319
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
53261-0519
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Reference Standard: UL;
53261-0619
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved