Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM SML-210YTT86M is a 1.25mm SINGLE COLOR LED with peak wavelength of 585nm, forward current of 0.025A, and luminous intensity of 13.0mcd. Ideal for surface mount applications, it features a colorless transparent lens and operates b/w -30°C to 85°C, making it suitable for various visible LED lighting projects.
Median Price
$0.094
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aranea Global
$0.092
$0.088
Continental Prestige Electronics
Argo Parts USA
$0.091
Corohmni
$0.273
Aztec Data Supply Inc.
$0.530
AZTECH Wire
$9.184
Ampacity Inc.
$15.100
This configuration allows for easy installation and use in various applications.
The small size of this LED makes it suitable for compact designs and tight spaces.
With a high forward current, this LED can provide bright and consistent illumination.
The peak wavelength of 585 nm ensures a specific and vibrant yellow color output.
The colorless transparent lens allows for maximum light transmission and brightness.
This LED is specifically designed for single color applications, providing focused and consistent lighting.
With two terminals, this LED is easy to connect and integrate into circuit designs.
The high maximum operating temperature ensures the LED can withstand various environmental conditions.
The low height of 0.8 mm makes this LED suitable for thin and compact devices.
The rectangular shape of this LED allows for easy alignment and orientation during installation.
The low minimum operating temperature allows for reliable performance even in cold environments.
The gold terminal finish with nickel barrier provides excellent conductivity and corrosion resistance.
The vibrant yellow color output of this LED is ideal for signaling and indication applications.
The tape packaging method ensures convenient storage and handling during production.
The terminal pitch of 2.35 mm allows for easy mounting and soldering onto circuit boards.
With a nominal luminous intensity of 13.0 mcd, this LED provides a bright and focused light output.
The surface mounting feature makes it easy to solder this LED directly onto a PCB for reliable connections.
Visible LEDs SML-210YTT86M attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-210YTT86M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
International Semiconductor
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Hy Electronic
EU2B-YS2J03F
Idec
ROTARY SWITCH;
KPTD-3216SURCK
Kingbright Electronic
KPTD-3216SURCK by Kingbright Electronic is a 1.6mm SINGLE COLOR LED with peak wavelength of 650nm, suitable for applications requiring HYPER RED light. With a max forward current of 0.03A and viewing angle of 50°, it's ideal for surface mount installations in various electronic devices.
OVM12F3W7
Optek Technology
SINGLE COLOR LED;
HLMP1503
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 4 mm; Color At Wavelength: Green; Maximum Forward Voltage: 3 V;
KPT-1608SURCK
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
551-0507-004F
Dialight
Dialight's 551-0507-004F is a 3mm red LED array with 4 separate elements. It has a peak wavelength of 635nm, forward current of 0.02A, and max forward voltage of 7.5V. Ideal for applications requiring high luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
LTW-M140ZVS
Lite-on Technology
LTW-M140ZVS by Lite-on Technology is a 3mm YELLOW LED with built-in ZENER DIODE. It has a max forward current of 0.03A and operates b/w -30 to 85°C. Ideal for surface mount applications requiring a single color LED with a viewing angle of 120°.
550-0507F
Dialight's 550-0507F is a 5mm red LED with built-in resistor, operating at -40 to 85°C. It has a peak wavelength of 655nm, forward current of 0.0075A, and forward voltage of 5V. Ideal for applications requiring a single color LED with diffused lens in radial mount configuration.
3153
Nte Electronics
The Nte Electronics 3153 is a single color LED array with 5 separate elements, each with a peak wavelength of 700nm. With a max forward current of 0.025A and nominal luminous intensity of 0.4mcd, it is ideal for applications requiring red light emission in a compact 4.99mm size package.
550-2507-004F
Dialight's 550-2507-004F is a 5mm SINGLE COLOR LED ARRAY with 4 elements, peak wavelength of 600nm, and max forward current of 0.03A. Ideal for applications requiring amber light emission, such as indicator lights in electronic devices.
MSL0104RGBU12Y
ROHM
ROHM's MSL0104RGBU12Y is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has max forward current of 0.04A, operates b/w -40 to 85°C, and offers red/green/blue colors. Ideal for surface mount applications requiring nominal luminous intensity of 700/1200/400 mcd.
HLMP-1719-A00A2
Broadcom
HLMP-1719-A00A2 by Broadcom is a 3mm single color LED with peak wavelength of 583nm. With max forward current of 0.007A, it emits yellow light at 2.1mcd luminous intensity. Ideal for applications requiring a round, tinted diffused lens in bulk packaging.
HSMS-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
553-0311F
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
HLMP-3301-D0000
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
APT2012CGCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
15335338AA350
Wuerth Elektronik & Kg
15335338AA350 by Wurth Elektronik is a single color LED with built-in ESD protection. It has a max forward current of 0.8A and a peak wavelength of 385nm. This UV LED is suitable for surface mount applications requiring a compact size and water clear lens.
HLMP-4700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-D12M8WT86C
ROHM's SML-D12M8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light with luminous intensity of 25.0mcd, suitable for TR packing in electronics industry.
1300
Wilbrecht Electronics
HLMP-6300-F0011
HLMP-6300-F0011 by Broadcom is a single color LED with a peak wavelength of 635nm and a max forward current of 0.03A. It is commonly used in applications such as indicator lights, displays, and signage due to its high efficiency red color and axial mount configuration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-211UTT86K
ROHM's SML-211UTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.02A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, featuring colorless transparent lens and gold terminal finish.
SML-210VTT86L
ROHM's SML-210VTT86L is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 8.15mcd. Ideal for surface mount applications in visible LEDs category, featuring colorless transparent lens and gold terminal finish.
SML-210MTT86N
ROHM's SML-210MTT86N is a 1.4mm SINGLE COLOR LED with 0.025A max forward current, emitting YELLOWISH GREEN light at 20.5mcd intensity. Ideal for surface mount applications in electronics due to its compact size and low power consumption.
SML-210MTT86
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
SML-210MTT86M
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-211DTT86K
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-210VTT86
ROHM SML-210VTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 4.0mcd. Ideal for surface mount applications in visible LEDs requiring red light emission at temperatures ranging from -30 to 85°C.
SML-210VTT86K
ROHM SML-210VTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, it operates b/w -30°C to 85°C temperatures and has gold over nickel terminal finish.
SML-211UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-210MT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86K
ROHM's SML-211YTT86K is a 1.25mm single color LED with a yellow color and a max forward current of 0.02A. It is suitable for surface mount applications and has a nominal luminous intensity of 5.15mcd.
SML-210YTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT86L
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Lens Type: TRANSPARENCE CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 0.8; Lens Type: TRANSPARENT CLEAR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-211YTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.25; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210PTT86
ROHM SML-210PTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 555nm and forward current of 0.025A. Ideal for surface mount applications, it emits pure green light at 4mcd luminous intensity.
SML-210LTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT87M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved