Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM SML-210YTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 585nm, forward current of 0.025A, and luminous intensity of 6.3mcd. Ideal for surface mount applications requiring yellow light emission in temperatures ranging from -30°C to 85°C.
Median Price
$0.274
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.300
100+ parts
$0.143
1k+ parts
$0.107
10k+ parts
$0.086
Verical
-
$0.248
Chip1Stop
$0.099
RS (Exports)
$2.173
$2.089
$2.048
IBS Electronics
$0.095
Vyrian
Extreme Components
NAC Semi
$0.090
Chip Stock
PC Components Company LLC
Quantum Digital Technology
ComSIT Distribution GmbH
Sea View Technologies
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
ECAB
EMSNET
Nova Conductors
Prism Electronics
LWI Electronics Inc
Semtec, LLC
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$0.050
Semicontronic
$0.049
$0.048
Corohmni
$0.101
Aztec Data Supply Inc.
$0.234
RC Electronics
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Glotronic Ltd.
Aranea Global
Kepictronics
Perfect Parts
Giza Technologies, Inc.
Single LED configuration allows for easy installation and replacement, making maintenance simple.
Compact size makes this LED suitable for applications where space is limited.
Low forward current consumption helps in energy efficiency and reduces heat generation.
Peak wavelength of 585nm ensures a consistent and vibrant yellow color output.
Colorless transparent lens allows for maximum light transmission and brightness.
Designed specifically for single color applications, ensuring a focused and uniform color output.
Simple 2-terminal design simplifies the connection process for easy integration.
High maximum operating temperature allows for reliable performance in various environments.
Low profile design enables this LED to be used in compact devices and applications.
Rectangular shape provides a wide viewing angle for better visibility of the emitted light.
Low minimum operating temperature ensures the LED can function in cold conditions without issues.
Gold over nickel terminal finish provides excellent conductivity and corrosion resistance for durability.
Yellow color output at a specific wavelength ensures accurate and consistent color reproduction.
Vibrant yellow color output is ideal for applications requiring attention-grabbing and bright visuals.
Bulk packing method offers cost savings for large volume orders and reduces packaging waste.
High maximum reverse voltage rating provides protection against reverse polarity and voltage spikes.
Standard terminal pitch allows for compatibility with common PCB designs and components.
Moderate luminous intensity provides a balanced level of brightness for various applications.
Visible LEDs SML-210YTT86 attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
SML-210YTT86 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Boca Semiconductor
Weitron Technology
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
National Semiconductor
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
TLHB4400
Vishay Intertechnology
TLHB4400 by Vishay Intertechnology is a 2.9mm single color LED with peak wavelength of 428nm, forward current of 0.02A, and luminous intensity of 15.0mcd. Ideal for applications requiring blue light emission in a compact form factor with a viewing angle of 60° and radial mounting feature.
KP-1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
HLMP-3507
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
VLMB1500-GS08
VLMB1500-GS08 by Vishay Intertechnology is a 0.5mm BLUE SINGLE COLOR LED with a peak wavelength of 468nm, max forward current of 0.03A, and max forward voltage of 3.15V. Ideal for surface mount applications requiring a viewing angle of 130° and nominal luminous intensity of 28mcd.
LST676-P2S1-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LST676-P2S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
HSME-C170
Broadcom
HSME-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With a viewing angle of 170° and luminous intensity of 50.0mcd, it's ideal for surface mount applications in electronics for visual indicators or displays.
150060BS73220
Wuerth Elektronik & Kg
SINGLE COLOR LED;
TLMP1100-GS08
TLMP1100-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 555nm. It has max forward current of 0.03A and viewing angle of 160°, ideal for surface mount applications requiring pure green light emission at temperatures ranging from -40 to 100°C.
HLMP-3301
Quality Technologies
SINGLE COLOR LED; Shape: ROUND; No. of Functions: 1; Size: 5 mm; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED;
OVSRRGBCC3TM
Tt Electronics Plc
OVSRRGBCC3TM by Tt Electronics Plc is a 2mm TRIPLE COLOR LED with COMMON ANODE configuration. It has a max forward current of 0.02A and diffused white lens type. Ideal for applications requiring red, green, and blue color outputs with a viewing angle of 150°.
VLMC3100-GS08
Vishay Intertechnology's VLMC3100-GS08 is a 2.4mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
ASMB-MTB0-0A3A2
ASMB-MTB0-0A3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. With peak wavelengths of 634/522/465nm, it has a viewing angle of 115° and nominal luminous intensity of 540.0/1600.0/350.0 mcd. Ideal for surface mount applications, it operates b/w -40 to 100 °C, with max forward current at 0.025 A and voltage at 2.6 V.
3036
Microprecision Electronics Sa
597-3401-502F
Dialight
Dialight's 597-3401-502F is a single color LED with peak wavelength of 585nm. It has a max forward current of 0.025A and forward voltage of 2.8V. Ideal for surface mount applications, it offers a viewing angle of 110° and luminous intensity of 6.3mcd in yellow light emission.
HLMP-3507-D0002
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
598-8510-207F
Dialight's 598-8510-207F is a 2mm dual-color LED with water-clear lens. It has max forward current of 0.02A, operating temp range -40 to 100°C, and viewing angle of 160°. Ideal for surface mount applications requiring red/green light indication in compact spaces.
SML-D12U8WT86C
ROHM
ROHM's SML-D12U8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it has a red color, luminous intensity of 63.0mcd, and operates b/w -40 to 85°C temperature range.
HLMP-1301-G0000
Broadcom's HLMP-1301-G0000 is a 3mm single color LED with peak wavelength of 635nm. With max forward current of 0.03A, it offers high efficiency red light for various applications like indicators and displays. Operating b/w -55°C to 100°C, this LED has a viewing angle of 60° and nominal luminous intensity of 12.6mcd.
591-3001-013F
Dialight's 591-3001-013F is a dual color LED with peak wavelengths of 635nm and 572nm. It has a max forward current of 0.03A, nominal luminous intensity of 6.5/8.0 mcd, and operates in temperatures ranging from -40 to 100°C. Ideal for surface mount applications requiring separate red and green elements with a viewing angle of 40°.
SML-LX1206GC-TR1
Lumex
The Lumex SML-LX1206GC-TR1 is a 2mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and viewing angle of 160°. Ideal for surface mount applications in electronics, it operates b/w -25 to 85 °C and has a luminous intensity of 10.0mcd.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-211UTT86K
ROHM's SML-211UTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.02A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, featuring colorless transparent lens and gold terminal finish.
SML-210VTT86L
ROHM's SML-210VTT86L is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 8.15mcd. Ideal for surface mount applications in visible LEDs category, featuring colorless transparent lens and gold terminal finish.
SML-210MTT86N
ROHM's SML-210MTT86N is a 1.4mm SINGLE COLOR LED with 0.025A max forward current, emitting YELLOWISH GREEN light at 20.5mcd intensity. Ideal for surface mount applications in electronics due to its compact size and low power consumption.
SML-210MTT86
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
SML-210MTT86M
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-211DTT86K
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-210VTT86
ROHM SML-210VTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 4.0mcd. Ideal for surface mount applications in visible LEDs requiring red light emission at temperatures ranging from -30 to 85°C.
SML-210VTT86K
ROHM SML-210VTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, it operates b/w -30°C to 85°C temperatures and has gold over nickel terminal finish.
SML-211UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-210MT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT86M
ROHM SML-210YTT86M is a 1.25mm SINGLE COLOR LED with peak wavelength of 585nm, forward current of 0.025A, and luminous intensity of 13.0mcd. Ideal for surface mount applications, it features a colorless transparent lens and operates b/w -30°C to 85°C, making it suitable for various visible LED lighting projects.
SML-211YTT86K
ROHM's SML-211YTT86K is a 1.25mm single color LED with a yellow color and a max forward current of 0.02A. It is suitable for surface mount applications and has a nominal luminous intensity of 5.15mcd.
SML-210YTT86L
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Lens Type: TRANSPARENCE CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 0.8; Lens Type: TRANSPARENT CLEAR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-211YTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.25; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210PTT86
ROHM SML-210PTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 555nm and forward current of 0.025A. Ideal for surface mount applications, it emits pure green light at 4mcd luminous intensity.
SML-210LTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT86K
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved