Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's SML-211DTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 611nm, forward current of 0.02A, and luminous intensity of 5.15mcd. Ideal for surface mount applications, this ORANGE LED operates b/w -30°C to 85°C, making it suitable for various visible light indication purposes.
Median Price
$0.125
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
$0.122
$0.118
Aranea Global
Semicontronic
$15.100
$14.722
$14.647
AZTECH Wire
$16.391
Ampacity Inc.
$20.100
Single configuration simplifies the design and installation process, making it easier to integrate this LED into various electronic projects.
Compact size allows for versatile placement in different applications where space is limited.
Low maximum forward current helps in energy efficiency and prevents overheating.
Peak wavelength of 611nm results in a distinct orange color output, suitable for specific lighting requirements.
Colorless transparent lens ensures efficient light transmission without distortion.
Single color LED provides a consistent and uniform color output, ideal for applications requiring a specific hue.
Two terminals make it easier to connect this LED to a circuit, simplifying the wiring process.
High maximum operating temperature allows for reliable performance in various environmental conditions.
Low height profile enables the LED to be installed in slim devices or tight spaces.
Rectangular shape provides a modern and sleek look, suitable for contemporary design aesthetics.
Low minimum operating temperature ensures that the LED can function effectively even in cold environments.
Gold terminal finish with nickel barrier enhances conductivity and durability, ensuring long-term reliability.
Distinct orange color output adds a pop of brightness and warmth to lighting applications.
Tape packing method makes it convenient for bulk handling and automated assembly processes.
Optimal terminal pitch of 2.35mm facilitates easy soldering and mounting onto PCBs or other surfaces.
Nominal luminous intensity of 5.15mcd provides adequate brightness for visibility in various lighting applications.
Surface mount design simplifies installation and allows for secure attachment to flat surfaces without additional hardware.
Visible LEDs SML-211DTT86K attributes and parameters. Explore more Visible LEDs devices from ROHM
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
SML-211DTT86K Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
APT1608ZGCK
Kingbright Electronic
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
HSMF-C113
Broadcom
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
LTW-C191TS5
Lite-on Technology
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
VLMU3510-365-130
Vishay Intertechnology
SINGLE COLOR LED;
150060YS75000
Wuerth Elektronik & Kg
150060YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm and viewing angle of 140°. It has a size of 1.1mm, operates b/w -40 to 85 °C, and is ideal for surface mount applications requiring a single color light source.
SML-A12UTT86
ROHM
ROHM's SML-A12UTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.03A. Ideal for applications requiring colorless transparent lens, it operates b/w -40 to 85°C and has a luminous intensity of 100mcd.
CMD15-21UGC/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: CLEAR; Height: 1.1 mm;
LGR971
Mentor & Prazisions Bauteile Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LGL29K-F2J1-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-F2J1-24 is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light, it has a viewing angle of 160° and nominal luminous intensity of 3.5mcd, suitable for surface mount installations in various electronic devices.
HSMG-C170
HSMG-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With max forward current of 0.02A and viewing angle of 170°, it operates b/w -40 to 85 °C, making it suitable for surface mount configurations in various electronic devices.
QTLP650C-2.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Configuration: SINGLE;
22-23C/R6GHBHW-C01/2C
Everlight Electronics
Everlight Electronics' 22-23C/R6GHBHW-C01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 626nm, 518nm, and 468nm. With a viewing angle of 130° and diffused white lens, it's ideal for surface mount applications requiring brilliant red, green, and blue illumination.
XHP50B-00-0000-0D0UH20E3
Wolfspeed
150141GS73100
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
TLDR5400
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: TINTED DIFFUSED; Packing Method: TR;
LTW-M140ZVS
LTW-M140ZVS by Lite-on Technology is a 3mm YELLOW LED with built-in ZENER DIODE. It has a max forward current of 0.03A and operates b/w -30 to 85°C. Ideal for surface mount applications requiring a single color LED with a viewing angle of 120°.
HSME-C191
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-D12M8WT86Q
ROHM SML-D12M8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light. Ideal for surface mount applications, it has a luminous intensity of 25.0mcd and operates b/w -40°C to 85°C temperature range.
598-8810-307F
Dialight
Dialight's 598-8810-307F is a 2mm COMMON ANODE TRIPLE COLOR LED with WATER CLEAR lens. It has a max forward current of 0.02A and operates b/w -40 to 100 °C. Ideal for applications requiring RGB illumination with a viewing angle of 160° and surface mounting feature.
150060GS55040
150060GS55040 by Wurth Elektronik is a single color LED with a peak wavelength of 520nm and a viewing angle of 140°. With a size of 1mm, it has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring green light emission in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SML-211UTT86K
ROHM's SML-211UTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.02A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, featuring colorless transparent lens and gold terminal finish.
SML-210VTT86L
ROHM's SML-210VTT86L is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 8.15mcd. Ideal for surface mount applications in visible LEDs category, featuring colorless transparent lens and gold terminal finish.
SML-210MTT86N
ROHM's SML-210MTT86N is a 1.4mm SINGLE COLOR LED with 0.025A max forward current, emitting YELLOWISH GREEN light at 20.5mcd intensity. Ideal for surface mount applications in electronics due to its compact size and low power consumption.
SML-210MTT86
ROHM's SML-210MTT86 is a 1.4mm single color LED with max forward current of 0.025A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light at a wavelength of 565nm, making it suitable for indicator lights in various electronic devices.
SML-210MTT86M
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-210VTT86
ROHM SML-210VTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 4.0mcd. Ideal for surface mount applications in visible LEDs requiring red light emission at temperatures ranging from -30 to 85°C.
SML-210VTT86K
ROHM SML-210VTT86K is a 1.25mm SINGLE COLOR LED with peak wavelength of 650nm, forward current of 0.025A, and luminous intensity of 5.15mcd. Ideal for surface mount applications in visible LED category, it operates b/w -30°C to 85°C temperatures and has gold over nickel terminal finish.
SML-211UTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-210MT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: TRANSPARENT CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT86M
ROHM SML-210YTT86M is a 1.25mm SINGLE COLOR LED with peak wavelength of 585nm, forward current of 0.025A, and luminous intensity of 13.0mcd. Ideal for surface mount applications, it features a colorless transparent lens and operates b/w -30°C to 85°C, making it suitable for various visible LED lighting projects.
SML-211YTT86K
ROHM's SML-211YTT86K is a 1.25mm single color LED with a yellow color and a max forward current of 0.02A. It is suitable for surface mount applications and has a nominal luminous intensity of 5.15mcd.
SML-210YTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210YTT86L
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 8.15; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Lens Type: TRANSPARENCE CLEAR; Terminal Finish: GOLD OVER NICKEL;
SML-211YTT86F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 0.8; Lens Type: TRANSPARENT CLEAR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
SML-211YTT86J
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.25; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211YT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-210PTT86
ROHM SML-210PTT86 is a 1.4mm SINGLE COLOR LED with peak wavelength of 555nm and forward current of 0.025A. Ideal for surface mount applications, it emits pure green light at 4mcd luminous intensity.
SML-210LTT86
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: GOLD OVER NICKEL;
SML-211DTT86G
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.3; Lens Type: COLORLESS TRANSPARENT; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved