Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTST-C150KYKT by Lite-on Technology is a single color LED with peak wavelength of 595nm. It has a max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring amber yellow light emission in compact spaces, such as indicator lights or display panels.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Prism Electronics
Nova Conductors
Advanced Electronics
$0.706
$0.642
$0.579
AZTECH Wire
$5.362
Continental Prestige Electronics
Bastille Electronics
Argo Parts USA
Single configuration allows for easy integration and control in various applications.
Compact size enables flexibility in design and placement.
Low forward current consumption helps in energy efficiency.
Peak wavelength of 595 nm provides a specific color output (Amber yellow) for targeted applications.
Water-clear lens ensures efficient light transmission and brightness.
Specifically designed as a single color LED for uniform and consistent lighting.
Simple 2-terminal connection for ease of use and installation.
High operating temperature range makes it suitable for various environmental conditions.
Low profile height for slim and compact designs.
Rectangular shape provides directional lighting in specific areas.
Wide range of minimum operating temperature for versatile applications.
Amber color output at specific wavelength for aesthetic and functional lighting purposes.
Convenient packing method for storage and transportation.
5V maximum reverse voltage protection for reliability and safety.
Optimal terminal pitch for easy soldering and connection.
Wide viewing angle of 130° for broad coverage of light output.
Nominal luminous intensity of 50.0 mcd for bright and visible illumination.
Surface mount design for easy and secure installation on PCBs.
Low forward voltage requirement for efficient power usage.
Visible LEDs LTST-C150KYKT attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Pitch:
Viewing Angle:
LTST-C150KYKT Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - C150 Series PCB Chg 12/Dec/2019
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Yageo
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Protek Devices
Changzhou Galaxy Century Microelectronics
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Goodwork Semiconductor
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LTST-C191KGKT
Lite-on Technology
LTST-C191KGKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and ultra bright green color. It has a max forward current of 0.03A, viewing angle of 130°, and nominal luminous intensity of 44.5mcd. Ideal for surface mount applications in electronics requiring high brightness green-yellow illumination.
551-3007F
Dialight
Dialight's 551-3007F is a 3mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 60° and radial mounting feature.
KP-1608MGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
CMD17-21VGD/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: DIFFUSED; Viewing Angle: 140 deg;
HLMP-4000#002
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
555-3009F
Dialight's 555-3009F is a 2mm single color LED with built-in resistor. It has a peak wavelength of 650nm, forward current of 0.0026A, and operates b/w -55 to 100°C. Ideal for applications requiring red light emission, such as indicator lights or signage.
KP-2012QBC-D
Kingbright Electronic
KP-2012QBC-D by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 468nm and water clear lens. It has a max forward current of 0.03A, viewing angle of 120°, and blue color at wavelength. Ideal for surface mount applications requiring compact visible LEDs with high luminous intensity.
597-6601-607F
Dialight's 597-6601-607F LED has a peak wavelength of 468nm, max forward current of 0.02A, and water-clear lens. Ideal for applications requiring blue light emission with a viewing angle of 70°. Operating temp range from -55°C to 85°C makes it suitable for various lighting solutions.
PKB-35-F35
Laser Components
SINGLE COLOR LED;
L-7104EC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 627;
KP-1608SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
HLMP-3507-D00B1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
CLVBA-FKA-CAEDH8BBB7A363
Wolfspeed
Wolfspeed's CLVBA-FKA-CAEDH8BBB7A363 is a COMMON ANODE TRIPLE COLOR LED with 0.025 A max forward current, 2.4 V max forward voltage, and 147.5/295.0/74.0 mcd nominal luminous intensity. Ideal for applications requiring RGB illumination in compact spaces with surface mounting feature.
VLMB1500-GS08
VLMB1500-GS08 by Vishay Intertechnology is a 0.5mm BLUE SINGLE COLOR LED with a peak wavelength of 468nm, max forward current of 0.03A, and max forward voltage of 3.15V. Ideal for surface mount applications requiring a viewing angle of 130° and nominal luminous intensity of 28mcd.
XHP35B-00-0000-0D0BD40E7
LTST-C170GKT
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
ASMT-RF45-AN002
Broadcom
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
XHP35B-00-0000-0D0BE20E3
KP-3216SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
HSMY-C170
HSMY-C170 by Broadcom is a single color LED with a peak wavelength of 589nm and a viewing angle of 170°. It is commonly used in applications such as surface mount lighting due to its small size (1.4mm) and low power consumption (max forward current of 0.02A).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTST-C190GKT
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
LTST-C190KRKT
LTST-C190KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm. It has a max forward current of 0.025A and viewing angle of 260°, making it ideal for surface mount applications in various electronic devices. With a water clear lens type and red color, this LED operates b/w -30°C to 85°C temperature range.
LTST-C191KRKT
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
LTST-C191KGKT-5A
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LTST-C190GKTT
LTST-C190GKTT by Lite-on Technology is a single color LED with peak wavelength of 565nm and viewing angle of 130°. With a size of 1.06mm, it has a max forward current of 0.03A making it suitable for surface mount applications in electronics requiring green light emission.
LTST-C19HE1WT
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
LTST-C191TBKT-5A
Visible LEDs;
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
LTST-C170KRKT
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
LTST-C193TBKT-5A
LTST-C193TBKT-5A by Lite-on Technology is a 1.15mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and operates b/w -20°C to 80°C temperature range.
LTST-C191KRKT-5A
LTST-C171KGKT
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
LTST-C193KRKT-5A
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LTST-C195KGJRKT
LTST-C195KGJRKT by Lite-on Technology is a 1.5mm DUAL COLOR LED with WATER CLEAR lens, featuring RED/GREEN colors and peak wavelengths of 639nm/574nm. It has a max forward current of 0.03A and viewing angle of 130°, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved