Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOLCC6,.06,20;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
A-Z Elektronik GmbH
1+ parts
100+ parts
1k+ parts
10k+ parts
Authorized Procurement Solutions
Perfect Parts
Kepictronics
RF/Microwave Switches UPG2163T5N-E2 attributes and parameters. Explore more RF/Microwave Switches devices from Renesas Electronics
Compression Point (1 dB):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Bourns
UPG2214TB-E4
Renesas Electronics
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 30 dBm;
BGS18MA12
SP8T;
ADG901BCP
ADG901BCP by Analog Devices is a CMOS RF/Microwave switch with 8 terminals. It offers low insertion loss of 1.25 dB and operates from 0 to 2500 MHz. Ideal for diversity switching applications, it has a max input power of 18.06 dBm and compression point of 20 dBm.
UPG2009TB-E3-A
Nec Compound Semiconductor Devices
SPDT; Terminal Finish: Tin/Bismuth (Sn/Bi); Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.02 dBm; Maximum Insertion Loss: .5 dB; Minimum Operating Temperature: -45 Cel;
SKY13374-397LF
Skyworks Solutions
SKY13374-397LF by Skyworks Solutions is an RF/Microwave Switch with max input power of 36 dBm, insertion loss of 0.55 dB, and operating frequency range from 800 MHz to 2200 MHz. It's a diversity switch component ideal for applications requiring high-performance switching in temperature range -40°C to 85°C.
UPG2193T6E-E2-A
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 824 MHz;
HMC241QS16E
Analog Devices' HMC241QS16E is a SP4T RF/Microwave switch with 1.5 dB max insertion loss, 23 dB min isolation, and 3500 MHz max operating frequency. Ideal for applications requiring high power handling up to 26.99 dBm CW, such as wireless communication systems and radar equipment.
CG2214M6-C2
California Eastern Laboratories
CG2214M6-C2 by California Eastern Laboratories is a RF/Microwave switch with max input power of 33.01 dBm and insertion loss of 0.55 dB. It operates b/w 50-3000 MHz, ideal for diversity switching applications in temperatures ranging from -45 to 85 °C.
BGS13AL12
SP3T; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Maximum Input Power (CW): 31.99 dBm;
UPG2406TB-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC174MS8TR
Analog Devices' HMC174MS8TR is a GAAS transfer switch with 1.8 dB max insertion loss, 15 dB min isolation, and 36 dBm compression point. Ideal for RF applications up to 3000 MHz, it features surface mounting and reflective port termination.
F2934NTGI8
SPDT; JESD-609 Code: e3; Terminal Finish: TIN;
F2976NEGK
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; No. of Functions: 3; Minimum Operating Frequency: 5 MHz; Maximum Operating Frequency: 10000 MHz;
UPG2163T5N-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC547LC3TR
Analog Devices' HMC547LC3TR is a SPDT RF switch with 16 terminals, offering 30 dB isolation and 3 dB insertion loss at up to 28 GHz. Its GaAs technology ensures a compression point of 16 dBm, making it ideal for high-frequency applications in the -40°C to +85°C temperature range. The ceramic package and surface mount feature enhance durability and ease of installation.
4263
Psemi
RF/Microwave Switches;
MA4SW510B-1
M/a-com Technology Solutions
SP5T; Maximum Operating Temperature: 125 Cel; Maximum Insertion Loss: 2.1 dB; Minimum Operating Temperature: -65 Cel; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 18000 MHz;
MA4SW510
SP5T; Maximum Insertion Loss: 1.4 dB; Maximum Input Power (CW): 30 dBm; Construction: COMPONENT; Maximum Operating Frequency: 26000 MHz; Minimum Operating Temperature: -65 Cel;
UPG2009TB-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Isolation: 24 dB;
BGS12P2L6E6327XTSA1
BGS12P2L6E6327XTSA1 by Infineon is a CMOS SPDT RF switch with 50 ohm impedance. It operates from 50 MHz to 6 GHz, offering 0.74 dB insertion loss and 24 dB isolation. Ideal for applications requiring high-frequency switching in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Nec Electronics America
SPDT; Minimum Operating Temperature: -45 Cel; Maximum Insertion Loss: .5 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 500 MHz; JESD-609 Code: e6;
UPG2009TB-E3-A by Renesas Electronics is a RF/Microwave Switch with SPDT technology. It has a max operating frequency of 2500 MHz and a min isolation of 24 dB. This component, made of plastic/epoxy, is commonly used in applications requiring high-frequency switching capabilities.
Nec Electronics
SPDT; Minimum Operating Frequency: 500 MHz; Minimum Operating Temperature: -45 Cel; Characteristic Impedance: 50 ohm; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 85 Cel;
UPG2012TB-E-A
UPG2012TB-E3-A
UPG2012TK-A
SPDT; Maximum Operating Frequency: 2500 MHz; Maximum Input Power (CW): 26.02 dBm; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e6;
UPG2006TB-E3
SPDT; Maximum Insertion Loss: .65 dB; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -45 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Construction: COMPONENT;
UPG2009TB
SPDT; Maximum Operating Frequency: 2500 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.02 dBm; Minimum Operating Temperature: -45 Cel; Construction: COMPONENT;
UPG2012TK-E2
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -45 Cel;
UPG2010TB-A
SPDT; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 2500 MHz; Construction: COMPONENT; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 36.02 dBm;
UPG2012TB-E3
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
UPG2010TB-E3
UPG2008TK-E2
SPDT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 500 MHz; Minimum Operating Temperature: -45 Cel; Maximum Operating Frequency: 2500 MHz;
UPG2010TB-E3-A
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 36.02 dBm;
UPG2005TB-E3
DIVERSITY SWITCH; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Nominal On Time: .02 us;
UPG2008TB-E3
SPDT; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 28.06 dBm; Minimum Operating Frequency: 500 MHz; Characteristic Impedance: 50 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
UPG2009TB-E3
SPDT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 2500 MHz;
UPG2012TB-A
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved