Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROPROCESSOR CIRCUIT; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Flip Electronics (Authorized)
1+ parts
100+ parts
1k+ parts
10k+ parts
Flip Electronics
Vigor
$8.734
Microchip USA
$26.887
Corohmni
$54.985
Authorized Procurement Solutions
Assy Fe
Kepictronics
Other Function uPs,uCs & Peripheral ICs TW8816-LB3-GR attributes and parameters. Explore more Other Function uPs,uCs & Peripheral ICs devices from Renesas Electronics
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Terminal Finish:
Peripheral IC Type:
TW8816-LB3-GR Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Microsemi
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Fagor Electronica S Coop
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1554216002
Molex
WIRE AND CABLE;
Transys Electronics
MCIMX6S5EVM10AB
NXP Semiconductors
MCIMX6S5EVM10AB by NXP Semiconductors is a low-profile, fine-pitch GRID ARRAY SoC with 624 terminals. It operates b/w -20 to 105 °C and has a supply voltage range of 1.35V to 1.5V. Ideal for applications requiring high-performance computing in compact spaces.
SE050B2HQ1/Z01SFZ
SE050B2HQ1/Z01SFZ by NXP Semiconductors is a cryptographic authenticator IC with CMOS technology. It operates b/w -40 to 105 °C and has a supply voltage range of 1.62V to 3.6V, making it ideal for industrial applications requiring secure authentication.
XCZU7EG-1FFVC1156I
Xilinx
XCZU7EG-1FFVC1156I by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w -40 to 100 °C and has a supply voltage range of 0.825V to 0.876V. This GRID ARRAY package is ideal for industrial applications requiring high performance uPs/uCs.
LTC4263CS#PBF
Linear Technology
MICROPROCESSOR CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
XCZU7EV-2FFVC1156I
The Xilinx XCZU7EV-2FFVC1156I is a CMOS microprocessor circuit with 1156 terminals in a grid array package. It operates b/w -40 to 100 °C and has a supply voltage range of 0.825V to 0.876V. Ideal for industrial applications requiring high-performance processing capabilities.
CY8C3246PVI-147
Infineon Technologies
CY8C3246PVI-147 by Infineon Technologies is an Industrial-grade PSoC with 524288 ROM bits. Operating at 1.8/5V, it features Nickel Palladium Gold finish and MSL of 3. Ideal for applications requiring ultraviolet erasable memory and peak reflow temperature of 260°C within 20s.
AM5718AABCX
AM5718AABCX by Texas Instruments is a 760-terminal System on Chip with CMOS technology. It operates b/w 0-90°C, with supply voltage ranging from 1.11-1.2V. Ideal for applications requiring high-speed processing in compact spaces.
MFRC52201HN1,115
The NXP Semiconductors MFRC52201HN1,115 is a microprocessor circuit with 32 terminals in a square chip carrier package. It operates at temperatures ranging from -25 to 85°C and requires a power supply of 3/3.3V. This IC is commonly used in applications requiring contactless communication and RFID technology.
ATWINC1500-MR210PB1961-T
Microchip Technology
ATWINC1500-MR210PB1961-T by Microchip operates at 3-4.2V, with temp range -40 to 85°C. It is a CMOS microprocessor circuit in a rectangular package style for industrial applications. This surface-mount IC has 28 terminals and measures 21.72mm x 14.73mm x 2.113mm, suitable for various uP/uC functions.
CY8C4127LQI-BL453
Infineon's CY8C4127LQI-BL453 is an Industrial-grade Programmable SoC with Pure Tin finish. It can withstand peak reflow temp of 260°C for 30s. Ideal for applications requiring versatile peripheral ICs in harsh environments.
SLM9670AQ20FW1311XTMA1
SLM9670AQ20FW1311XTMA1 by Infineon is a 32-terminal IC with max supply voltage of 1.95V and min operating temp of -40°C. Ideal for cryptographic authentication applications due to its CMOS technology, quad terminal position, and compact square package style.
AM4376BZDNA100
AM4376BZDNA100 by Texas Instruments is a SYSTEM ON CHIP with CMOS technology. It operates b/w -40 to 105°C, has 491 terminals in a GRID ARRAY package style, and supports a supply voltage range of 1.272V to 1.378V. Ideal for industrial applications requiring low profile and fine pitch components.
XC7Z035-1FBG676I
XC7Z035-1FBG676I by Xilinx is a SYSTEM ON CHIP with CMOS technology. It operates b/w -40 to 100 °C and has a supply voltage range of 0.95V to 1.05V. With 676 terminals in a GRID ARRAY package, it's ideal for applications requiring high-performance processing in compact spaces.
AX-SFUS-1-01-TB05
Onsemi
AX-SFUS-1-01-TB05 by Onsemi is a CMOS MICROPROCESSOR CIRCUIT with 40 terminals in a RECTANGULAR CHIP CARRIER package. It operates b/w -40 to 85 °C, with supply voltage range of 1.8V to 3.6V, making it ideal for industrial applications requiring high performance and reliability.
MIMXRT1175CVM8A
The NXP MIMXRT1175CVM8A is a SoC peripheral IC with CMOS technology. It operates b/w -40 to 105 °C, with supply voltage range of 1.1-1.15 V. Its grid array package has 289 terminals and measures 14x14 mm, making it suitable for various embedded applications.
XCZU7EG-2FFVF1517I
XCZU7EG-2FFVF1517I by Xilinx is a MICROPROCESSOR CIRCUIT with CMOS technology. It operates b/w -40 to 100 °C and has a supply voltage range of 0.825V to 0.876V. This GRID ARRAY package is ideal for industrial applications requiring high performance uPs/uCs.
XC7Z035-2FFG900E
XC7Z035-2FFG900E by Xilinx is a programmable system on chip with CMOS technology. It operates b/w 0 to 100 °C and has a supply voltage range of 0.95V to 1.05V. With a grid array package style, it's ideal for various applications in the Other Function uPs,uCs & Peripheral ICs category.
FT800Q-T
Bridgetek
MICROPROCESSOR CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
CC1310F32RGZR
CC1310F32RGZR by Texas Instruments is a MICROPROCESSOR CIRCUIT with 28672 RAM Bytes, operating at -40 to 85 °C. It features a CORTEX-M3 CPU Family, 48 terminals in a SQUARE package style, and supports supply voltages from 1.8V to 3.8V. Ideal for industrial applications requiring low power consumption and high performance in compact designs.
CY8C21434-24LQXIT
CY8C21434-24LQXIT by Infineon is a 32-terminal, CMOS technology chip with a max supply voltage of 5.25V and operating temp range of -40 to 85°C. Ideal for industrial applications, this programmable SoC has a square shape, no lead terminal form, and very thin profile package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TW8804-LC3-GRSH
Renesas Electronics
Other uPs/uCs/Peripheral ICs; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3;
Intersil
Other uPs/uCs/Peripheral ICs;
TW8832S-LB1-CR
Other uPs/uCs/Peripheral ICs; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
TW8816-LB3-GRS
MICROPROCESSOR CIRCUIT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
TW8823-LC2-CE
Other uPs/uCs/Peripheral ICs; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30;
Other uPs/uCs/Peripheral ICs; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
TW8816-LA3-GRS
Other uPs/uCs/Peripheral ICs; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
Other uPs/uCs/Peripheral ICs; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
TW8819AT-NA2-GRT
Other uPs/uCs/Peripheral ICs; Terminal Finish: NICKEL GOLD PALLADIUM SILVER; Moisture Sensitivity Level (MSL): 3;
TW8819AT-NA2-GR
TW8810-LD2-GR
Other uPs/uCs/Peripheral ICs; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
TW8819-NA2-CR
Other uPs/uCs/Peripheral ICs; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
TW8819-NA2-CRT
Other uPs/uCs/Peripheral ICs; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
TW8811-LC2-GR
Other uPs/uCs/Peripheral ICs; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
TW8816-LB3-CR
TW8816-BB3-GR
MICROPROCESSOR CIRCUIT; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e1; Terminal Finish: TIN SILVER COPPER;
TW8816-LA3-GRST
Other uPs/uCs/Peripheral ICs; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN;
TW8816-LB3-GRST
Other uPs/uCs/Peripheral ICs; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved